Re: REMINDER -- SAS-L BOF at SAS Global Forum! #4 1561893

I had thought of having a daily post to the list provided I can get access
to the internet.  I will hope and presume that in this day and age that my
hotel will have access that I can use from my room.

As for the pictures, geez  I know Dorfman has or had some pictures where we
were all crawling over a big metal fence trying to get of the big area in
Philly after the kick off party.

Toby Dunn

You can see a lot by just looking.  ~Yogi Berra

Do not seek to follow in the footsteps of the wise.  Seek what they sought.
~Matsuo Basho

You never know what is enough, until you know what is more than enough.
~William Blake, Proverbs of Hell

From: Mike Rhoads <RHOADSM1@WESTAT.COM>
Reply-To: Mike Rhoads <RHOADSM1@WESTAT.COM>
Subject: Re: REMINDER -- SAS-L BOF at SAS Global Forum!
Date: Thu, 12 Apr 2007 11:03:18 -0400


Strangely enough, yours is the second response I've received, both of
them referring to compromising or incriminating photos.  Are you
insinuating anything about the members of this fine and respectable
group???   ;-)

I had previously asked one of our SAS-L photographers extraordinaire to
bring a camera, however, so I guess we will see what happens ...


-----Original Message-----
From: owner-sas-l@listserv.uga.edu [mailto:owner-sas-l@listserv.uga.edu]
On Behalf Of Paul A. Thompson
Sent: Thursday, April 12, 2007 10:46 AM
Subject: RE: REMINDER -- SAS-L BOF at SAS Global Forum!

In past years, some persons have posted some observations about
would encourage some enterprising person to post your occasional note
the earth-shattering and mind-blowing events sure to occur at SAS Global
Forum.  And if you can get any compromising pictures of important people
the posts, so much the better!!

Paul A. Thompson, Ph.D.
Division of Biostatistics, Washington University School of Medicine
660 S. Euclid, St. Louis, MO 63110-1093

-----Original Message-----
From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of
Sent: Thursday, April 12, 2007 9:37 AM
Subject: REMINDER -- SAS-L BOF at SAS Global Forum!

Will you be attending the very first SAS Global Forum next week in

We're sure that the conference will be filled with highlights -- opening
session, giant demo area, more presentations than you can even think
about attending, meeting M-I-C-K-E-Y, etc., etc.

However, the one event that you absolutely will not want to miss is ...

The One-and-only, Annual SAS-L Birds of a Feather Get-together!

When:  Tuesday, April 17, 2007
Where: Southern Hemisphere IV
Time:  7:00 - 8:00 pm

Be sure and take this opportunity to -

HEAR the latest statistics on SAS-L postings (and post-ers)

SEE who wins the coveted SPORTY, SASLROY, and MVS awards.  (Will anyone
be inducted into the Hall of Fame this year???)

JOIN a discussion on the future of SAS information-sharing in the 21st

and, last but certainly not least

MEET many of your favorite SAS-Lers!

We certainly hope to see many of you there!

The SAS Global Forum 2007 SAS-L BOF Planning Committee,

     Ron Fehd (rjf2@cdc.gov)
     Jack Hamilton (jfh@alumni.stanford.org)
     Larry Hoyle (larryhoyle@ku.edu)
     Joe Kelley (jkelley@arches.uga.edu)
     Mike Rhoads (RhoadsM1@westat.com)
     Dianne Rhodes (Rhodes.dianne@bls.gov)
     Bill Viergever (william@viergever.net)

Mortgage refinance is Hot. *Terms. Get a 5.375%* fix rate. Check savings
tobydunn (6020)
4/12/2007 3:34:25 PM
comp.soft-sys.sas 142827 articles. 4 followers. Post Follow

0 Replies

Similar Articles

[PageSpeed] 10


Similar Artilces:

Re: RE : [HP3000-L] RE : [HP3000-L] OT: Suggestions for massive storage
Nerds! 8-D -----Original Message----- From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On = Behalf Of Christian Lheureux Sent: Monday, September 19, 2005 3:36 PM To: HP3000-L@RAVEN.UTC.EDU Subject: [HP3000-L] RE : [HP3000-L] RE : [HP3000-L] OT: Suggestions for = massive storage Not sure Blades can run Debian. I'm sure they run RH, however. I'll = check whether they also run Suse. Basically, an HP Blade System is a big 16-slot chassis, where you can = put 1-16 blades, each 1-2 CPUs. Unlike DL Proliants, Blades don't need FC adapters, which are ...

Re: RE : [HP3000-L] OT: Riots in France (was: RE : [HP3000-L] Paging Christian) #2
Last year, my then 6 year old, was talking up a storm. During some conversation he was having about Sponge Bob, I told him to 'breathe' with the intent of getting him to stop (or at least slow down). Without missing a beat, he inhaled, exhaled, inhaled again, and continued on with his story. Ya just gott'a love kids! Ray Shahan -----Original Message----- From: HP-3000 Systems Discussion [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Chuck Ryan Sent: Wednesday, November 09, 2005 7:38 AM To: HP3000-L@RAVEN.UTC.EDU Subject: Re: [HP3000-L] RE : [HP3000-L] OT: Riots ...

Re: sys
You can use DATEPART(dtval) to get a date value out of a datetime value. Date is an integer where a difference of 1 = 1 day. There is also the function DATETIME() which might (or might not) be useful for you. -Joe On Mon, Mar 9, 2009 at 2:49 PM, Tiffany <tiffany.vidal@gmail.com> wrote: > Hello, > > I am trying to obtain the system datetime, but can only seem to obtain > the date. When I try "&sysdate"dt I get a 1960 value; however > "&sysdate"d returns the correct date without time. My objective is to > determine if an event happened more than 1 year from today. I tried > to subtract my event date from sysdate, but I am not sure what units > the returned values are in; they are not in seconds, and it doesn't > look like days either. > > thank you for any suggestions! > Here's another way: %let rundate = %sysfunc(putn("&sysdate9:&systime"dt,datetime19.)); ...

Re: OT: Reminder #4
Hi Wirt :) Well... I was in Vegas travelling when Boston broke their curse... and at the start of game 4 I pointed out that it looked like they might pull it off.... and someone reminded me that even the Blazers had won a title! hehehe Art "just some humor " Bahrs ======================================================= Art Bahrs, CISSP Information Security The Regence Group (503) 553-1425 FAX (503) 553-1453 |---------+--------------------------------> | | "Wirt Atmar" | | | ...

Re: Re[4]: [2.4.2] wxRect::Inflate() broken?
> DE> Agreed although maybe we could just add a new ReallyInflate() method > DE> that doesn't do the check and implement Inflate() by doing > DE> ReallyInflate() then checking for negatives. Still, I feel it's > DE> probably overkill. My guess is that whoever added the negative check > DE> did so because it seemed like it was a good idea not because it was > DE> really necessary. I think the code should just be changed. > > Yes, I agree, my worries here are probably overdone. Happy to hear that. :-) Vadim, also please ...

Re-launch of The Gadgets Forum #4
Re-launch of The Gadgets Forum ------------------------------------------------ Re-launch of "The Gadgets Forum - gadgets.pk" with new and stunning categories, now you can find latest news and reviews about the following: 1) Audio/Video Gadgets = MP3 Players, iPods, Speakers, Audio/Video Systems, Digital Cameras etc. 2) Automobile Gadgets 3) Cell Phones & Accessories 4) Laptops, Desktops & Accessories 5) Clocks & Watches 6) Gaming Gadgets 7) Geek Toys 8) GPS & Satellites 9) Home & Office Gadgets 10) Kitchen Gadgets 11) Solar Powered Gadgets 12) Travel...

Re: OT: The global economy #4
>Are the American consumers subsidizing the other markets' consumers? You bet! but not just with pharmaceuticals. The list is endless. These people live in their price controlled arena's and wait for the US spend the time and money to develop these life saving drugs. Then they reap the benefits with cheap prices. Here we are, the most generous country in the world, and it's not enough. People still hate us. Go figure! Tim -----Original Message----- From: John Clogg [mailto:JClogg@thecreek.com] Sent: Thursday, April 22, 2004 2:29 PM To: HP3000-L@RAVEN.UTC.EDU...

Re: existence of global variable #4
Rondo , That depends : _numeric_ will get you all the numeric variables in yoru data set _character_ will get you all the character variables in yoru data set Var: will get you all the vars starting with 'Var' Other wise you will have to list them by hande or some combination there of. Toby Dunn From: rondo1010 <rondo@HOTMAIL.COM> Reply-To: rondo1010 <rondo@HOTMAIL.COM> To: SAS-L@LISTSERV.UGA.EDU Subject: Re: existence of global variable Date: Sun, 23 Apr 2006 18:00:53 -0700 so for the check_var_list part, I have to actually list the names of all of my 132 variab...

Re: Screen change
Yup, Roy's correction is accurate (thanks Roy). I went into VIEW, and verified it. Esc[field_nameEsc] =20 Raymond Shahan Information Systems REPUBLIC TITLE OF TEXAS, INC. 2701 W Plano Parkway=20 Plano, TX 75075 =20 direct 214.556.0202 main 972.578.8611 fax 972.424.5621 www.republictitle.com rshahan@republictitle.com Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming:=20 -- WOW!!! What a Ride!!! -----Orig...

Re: ctRE : [HP3000-L] RE : [HP3000-L] OT: The Century Ahead #2
On Mon, 23 Jan 2006 14:51:39 -0800, Shawn Gordon <shawn@thekompany.com>=20 wrote: >At 12:24 PM 1/23/2006, Christian Lheureux wrote: >>I stand by what I've written in my previous post. >> >>1) Torture : the definitions accepted by the UN as an international body >>include degradation and humiliation. Of course, the Cheney-Rumsfeld >>definition of torture is carefully narrowed to a much more restrictive >>interpretation. So, Abu Ghraib. > >oh puleaze - go read up on how that happened and=20 >who was responsible, it had nothin...

RE : [HP3000-L] OT: Riots in France (was: RE : [HP3000-L] Paging Christian)
So does France also have a 'posse comitatus' law? Tracy Johnson Measurement Specialties, Inc.=20 BT NNNN * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * If 'posse comitatus' really is what is referred to on this page : http://www.uscg.mil/hq/g-cp/comrel/factfile/Factcards/PosseComitatus.html= , then I guess France has very similar laws, were it only to avoid the use = of regular army for anything else than pure military defense purposes. I previously did not...

Re: ctRE : [HP3000-L] RE : [HP3000-L] OT: The Century Ahead #2
Yes, he got a reprimand. Two months restriction to his barracks and = 1500 bucks fine. Tough call! Tracy Johnson Measurement Specialties, Inc.=20 BT NNNN > -----Original Message----- > From: HP-3000 Systems Discussion=20 > [mailto:HP3000-L@RAVEN.UTC.EDU] On Behalf Of Michael Baier > Sent: Tuesday, January 24, 2006 11:42 AM > To: HP3000-L@RAVEN.UTC.EDU > Subject: Re: [HP3000-L] ctRE : [HP3000-L] RE : [HP3000-L] OT:=20 > The Century Ahead >=20 >=20 > On Mon, 23 Jan 2006 14:51:39 -0800, Shawn Gordon=20 > <shawn@thekompa...

Re: Global or AUTOMATIC, should I use automatic? #4
On Wed, 15 Feb 2006 09:23:11 -0500, data _null_; <datanull@GMAIL.COM> wrote: >Say I write a little macro that can be called more than once within a >user written data step. The first call to little macro needs(wants) >to create a temporary array and give it some initial values. > >Therefore "I think" the little macro needs to know if it has been >called so it can emit the ARRAY statement or not. > >I create a global macro variable named &sysMacroName and give it the >value &sysMacroName and check it. But then I see there are a number >o...

Re: How to a value from a table into a global variable? #4
henry.huiliao@GMAIL.COM wrote back: >Here is a sample of my code ready for test. thanks a lot for everyone's >help. This should a simple issue for someone here, I believe. What I >want is change the value of alphad0 through the Macro reads the value >from table minw. thanks! > >%let tb1=h03; >%let alphad0=0; > >data minw; >input x&tb1; >cards; >1 >; >run; > >%Macro assign_value_alphad0; >proc iml; >use minw; >read all var {x&tb1}; >alphad0 = x&tb1; >close minw; >print alphad0; >run; >quit; >%Mend assign_...

Re: Best of the 'L' #4
yes...and it's easier than SASL because they receive a question and store keywords and one answer etc... immedialty. SAS manages his tech support, here we ... answer to the questions :) The same result could be get if for each answers and questions, we load somes metadata lines about the problem and answers as Sig do . St�phane. Selon Dianne Rhodes <RHODESD1@WESTAT.COM>: > > The week FAQ could be interesting but it's a full time job ! > > > > > The FAQ that SAS tech support maintains is pretty good, check it out > here: > > http://support.sas.co...

Re: Re: malloc #4
The link worked this time... Don't know why - perhaps I should buy a new brain ? - Well, it seems to be a very good program!! I will test it this evening ;) - but the online help has a kind of bug :(:( - > Hi, the site works without a problem. > > http://www.xs4all.nl/~jorgb/wxcrp/ > > If you have trouble accessing it, you can also use the sourceforge link to download it; > > http://prdownloads.sourceforge.net/wxcrp/wxCRPv1_4.exe?download > > Regards, > - Jorgen > > > -- > ==================================================...

Re: [ace-users] Re: ACE 5.4 compiling problems with g++ 3.4.3
Hi > First, please use the problem-report-form when asking questions. ACE 5.4 is > not supported with newer GCC versions. All these issues are resolved in the > upcoming x.4.3 release. > > For the time being, try to add the following to your config.h > > # if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) > # define ACE_EXPLICIT_TEMPLATE_DESTRUCTOR_TAKES_ARGS > # endif /* __GNUC__ >= 3.4 */ > > You are correct, the download link doesn't work. Bala, do you have an idea > what is happening with the download links. Should be fine now! Please let us know if there are still problems. Thanks Bala ...

RE: [ace-users] segfault on linux x86-64 with ACE/TAO 5.4.4/1.4.4
Hi Lothar, Thanks for using the PRF form. It looks that one of the pointers to strcmp is zero, maybe that results in the crash. Could you post a small test app that reproduces the problem? Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > ACE VERSION: 5.4.4 > > HOST MACHINE and OPERATING SYSTEM: > uname -a > Linux janus #1 Wed Mar 23 21:52:37 UTC > 2005 x86_64 x86_64 > x86_64 GNU/Linux > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > COMPILER NAME AND VERSION (AND PATCHLEVEL): > gcc-4.0.0 --version > gcc-4.0.0 (GCC) 4.0.0 > > CONTENTS OF $ACE_ROOT/ace/config.h [if you use a link to > a platform- > specific file, simply state which one]: > cat /opt2/linux/x86_64/ACE/1.4.4/ACE_wrappers/ace/config.h > #define ACE_HAS_XML_SVC_CONF > #include "ace/config-linux.h" > > CONTENTS OF > $ACE_ROOT/include/makeinclude/platform_macros.GNU (unless > this isn't used in this case, e.g., with Microsoft Visual C++): > cat > /opt2/linux/x86_64/ACE/1.4.4/ACE_wrappers/include/makeinclude/ > platform_macros.GNU > > # configure ACE/TAO for our use > > debug=1 > optimize=1 > exceptions=1 > threads=1 > inline=1 > rtti=1 > versioned_so=1 > interface_repo=1 > ssl=...

Re: [ANN] sys-win32etc 0.0.4
> -----Original Message----- > From: Park Heesob [mailto:phasis@bcline.com] > Sent: Thursday, September 04, 2003 9:56 PM > To: ruby-talk@ruby-lang.org > Subject: Re: [ANN] sys-win32etc 0.0.4 > > > Hi, > ----- Original Message ----- > From: "Berger, Daniel" <djberge@qwest.com> > To: "ruby-talk ML" <ruby-talk@ruby-lang.org> > Sent: Friday, September 05, 2003 6:19 AM > Subject: [ANN] sys-win32etc 0.0.4 > > > ... > > HELP WANTED > > ============ > > Testing is much appreciated, especially for th...

Re: How to edit the SYSSTARTUP.PUB.SYS file? #4
Paul: Logging on as system manager with the option to not execute any assigned (catalog'd) udc's may not prevent the sysstart file from being "locked" - it depends on how it is being "locked" in the udc(s). As others have said, for the users shown accessing the file, do a SHOWCATALOG and then investigate if and why the file is being accessed through the udc(s). * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * ...

Re: [9fans] browse /sys/src #2 #4
On Wed Jan 26 14:09:22 JST 2005, Kenji Okamoto wrote: > > I might be missing your point as usual, but the community is open > > and anyone can get the sources regardless of how one get them > > This is the problem I bramed.? Didn't you write that you'd like the community to be as such? We, academic community is 'open', anyone can get the resources we developed. However, if you want to enter the community, you have to be evaluated before. In this sense, academic community is not completely 'open'. However, we don't believe it's not ...

Re: Global macro var stops working #4
Can you show an example of macro variable promotion? I can't get these macro variables promoted. 2866 %macro g(arg=Am I global yet); 2867 %local I; 2868 %let i = I am local but I want to be global; 2869 %let w = %str(I don%'t know what I am but I want to be global); 2870 %global i arg w; 2871 %mend; 2872 %g 2873 run; ERROR: Attempt to %GLOBAL a name (I) which exists in a local environment. ERROR: Attempt to %GLOBAL a name (ARG) which exists in a local environment. ERROR: Attempt to %GLOBAL a name (W) which exists in a local environment. On 8/13/08, RolandRB <rolandberry@hotmail.com> wrote: > On Aug 13, 10:19 am, RolandRB <rolandbe...@hotmail.com> wrote: > > On Aug 12, 11:29 pm, earlin...@GMAIL.COM (Chris Sanders) wrote: > > > > > Ok, one more time - > > > > > Scott, > > > > > Good point. This was adapted from something else that was useful as a > > > macro, but it is a bit of a hammer for gnats situation. > > > > > Roland, you're exactly right. D'oh! > > > > Hilarious! :o)) > > > > A lot of people think that declaring a macro global must be the start > > point of it. But it isn't. It is only "promoting it" to global. > > I should have written "it need not be. It might only be promoting it > to global". > On Aug 13, 1:19=A0pm, iebup...@GMAIL.COM ("./ ADD NAME=3DData _null...

RE: [ace-users] segfault on linux x86-64 with ACE/TAO 5.4.4/1.4.4 #2
Hi, > Thanks for the reply. > The reason why I posted the stacktrace is that I have > currently no clue how to > reproduce a small testcase. But I will keep trying. > > I had the hope that someone familiar with ACE_Malloc_T<> > could shed light on > this subject. As I said the curious thing is that it works > with 32bit and > fails with 64bit. The only thing that I can imagine off is that somewhere a 64bit pointer is by accident handled as 32bit. Johnny ...

Re: *******Re: Re: [HP3000-L] OT: Siegfried and Roy tiger att...
Ed asks: > anyone want a signed book about Siegfried and Roy signed by both of them? > does not exactly fit in the museum collection... shall sell or trade it > off.... Sounds like the perfect Ebay item. There might well be someone there who will pay a fair amount for it. Wirt Atmar * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * ...

Re: using macro to assign a Global Variable by condition #4
> From: Alice > My task is very simple here. > I want to assign a Global Variable, firstwk, > according to the value of SP. > I tried following code, it wouldn't work. > I want to know WHY it doesn't work and HOW to modify it to make it > work. I think the Why is that macro variable scoping rules were changed between v8 and v9. As Kevin has suggested you need a %global statement: and some polishing > ***Program: PROPS.mac; > %macro props; %macro props(SP); %global FirstWk;%Let FirstWk = 0; > %if &sp.=AB %then %let firstwk = 60; > %if &sp.=...

Web resources about - Re: REMINDER -- SAS-L BOF at SAS Global Forum! #4 1561893 - comp.soft-sys.sas

Reminder: You Can’t See Who Viewed Your Facebook Profile
Applications that promise to show Facebook users who has viewed their profiles have been around as long as Facebook itself, and despite countless ...

Reminder on California law regarding... - Huntington Beach Police Department - Facebook
A law passed by the California Legislature made it an infraction to talk on a cell phone while driving effective July 1, 2008. On January 1, ...

Login Review and API v2.0 Migration Reminder
Migrate to Graph API v2.0, the new Login, and submit your app for Login Review

Fantastical adds reminders support
This is a great app that I use every day. Now it has reminders too.

Birthday Reminder, SimCity promotion, Songza, Pot Farm, Opera Mini, more on our top 20 emerging Facebook ...
Birthday Reminder took the top spot in our top emerging Facebook applications this week with a 165 percent gain in monthly active users. We ...

The Daily Reminder (@TDR_Network) on Twitter
Sign in Sign up To bring you Twitter, we and our partners use cookies on our and other websites. Cookies help personalize Twitter content, tailor ...

A friendly reminder about password security - Twitter Blogs
... remind you of best practices... Skip to main content Blog Have an account? Sign in Search form Search All Twitter Blogs &nbsp A friendly reminder ...

Track My Coupons Lite - Coupon Organizer and Reminders for iPhone, iPod touch, and iPad on the iTunes ...
Get Track My Coupons Lite - Coupon Organizer and Reminders on the App Store. See screenshots and ratings, and read customer reviews.

Waze iOS app adds ‘Planned Drives’ w/ traffic updates and reminders for upcoming appointments
... a new feature called “Planned Drives” for iOS users. more… Filed under: Apps Tagged: App Store , Appointments , iOS , Planned Drives , Reminders ...

Australian Roads Minister's stern reminder: Hoverboards are banned
Marty McFly made them cool and Justin Bieber has even ridden one, but a politician in Australia has played the "Christmas Grinch" warning against ...

Resources last updated: 3/18/2016 1:36:25 AM