f



network printer problem

me again...

printer, dev 440  laserjet 4250.....stopped printing last week. accessible =
on web browser.

Any suggestions please, short of a reboot? Stop/start network?
thanks,
john


Have had it powered down, wait a while, back up again, no improvement..

Shows with msg on browser:
ORDER CARTRIDGE LESS THAN 1500 PAGES

:abortio 440

HLIO internal error. Command cannot be executed. (CIERR 3161)

:showdev 440

LDEV AVAIL OWNERSHIP VOLID DEN ASSOCIATION

440 UNAVAIL SPOOLER OUT

:strs 440

STARTSPOOL 440

Device is already spooled out. (CIERR 3218)

:stps 440

STOPSPOOL 440

SPOOLER ;STOP not performed on device 00000440. (CIWARN 4619)

________________________________
CAUTION: This message may contain privileged and confidential information i=
ntended only for the use of the addressee named above. If you are not the i=
ntended recipient of this message you are hereby notified that any use, dis=
semination, distribution or reproduction of this message is prohibited. If =
you have received this message in error please notify RYCO Hydraulics Pty. =
Ltd. immediately. Any views expressed in this message are those of the indi=
vidual sender and may not necessarily reflect the views of RYCO Hydraulics =
Pty. Ltd.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

0
John
11/25/2008 10:40:11 PM
comp.sys.hp.mpe 25828 articles. 0 followers. rhorner (2) is leader. Post Follow

1 Replies
308 Views

Similar Articles

[PageSpeed] 41

Here is some more info - the listed spoolfile doesn't exist.....
Now the queue is open, I have created a new file for it, but how do I get i=
t out of the 'closing conn' state? startspool gives me 'already started'

:spooler 440;show

LDEV  DEV       SPSTATE   QSTATE  OWNERSHIP    SPOOLID    JOB STEP

 440  00000440  *STOP     OPENED  OUT SPOOLER  #O3115282  CLOSING CONN


Regards,
John Pitman

-----Original Message-----
From: Gilles Schipper [mailto:gsainc@rogers.com]
Sent: Wednesday, 26 November 2008 9:50 AM
To: John Pitman
Subject: Re: [HP3000-L] network printer problem

I'm not sure if the first attempt at :abortio and the resulting message pre=
cludes you from issuing the same command again .. and again and again until=
 you receive the message "no i/o to abort".

May be worth a try.

If you eventually DO get the "no i/i to abort" message, a startspool comman=
d could very get it going again.

Otherwise, you may be SOL until a network restart.

Good luck.

Cheers,




At 05:40 PM 08-11-25, you wrote:
>me again...
>
>printer, dev 440  laserjet 4250.....stopped printing last week.
>accessible on web browser.
>
>Any suggestions please, short of a reboot? Stop/start network?
>thanks,
>john
>
>
>Have had it powered down, wait a while, back up again, no improvement..
>
>Shows with msg on browser:
>ORDER CARTRIDGE LESS THAN 1500 PAGES
>
>:abortio 440
>
>HLIO internal error. Command cannot be executed. (CIERR 3161)
>
>:showdev 440
>
>LDEV AVAIL OWNERSHIP VOLID DEN ASSOCIATION
>
>440 UNAVAIL SPOOLER OUT
>
>:strs 440
>
>STARTSPOOL 440
>
>Device is already spooled out. (CIERR 3218)
>
>:stps 440
>
>STOPSPOOL 440
>
>SPOOLER ;STOP not performed on device 00000440. (CIWARN 4619)
>
>________________________________
>CAUTION: This message may contain privileged and confidential
>information intended only for the use of the addressee named above.
>If you are not the intended recipient of this message you are hereby
>notified that any use, dissemination, distribution or reproduction of
>this message is prohibited. If you have received this message in error
>please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
>expressed in this message are those of the individual sender and may
>not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.175 / Virus Database: 270.9.10/1810 - Release Date:
>11/24/2008 2:36 PM

---------------------------------------------------------------------------=
----------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
email:  gilles@gsainc.com  web: http://www.gsainc.com
---------------------------------------------------------------------------=
----------------------



CAUTION: This message may contain privileged and confidential information i=
ntended only for the use of the addressee named above. If you are not the i=
ntended recipient of this message you are hereby notified that any use, dis=
semination, distribution or reproduction of this message is prohibited. If =
you have received this message in error please notify RYCO Hydraulics Pty. =
Ltd. immediately. Any views expressed in this message are those of the indi=
vidual sender and may not necessarily reflect the views of RYCO Hydraulics =
Pty. Ltd.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

0
John
11/26/2008 12:06:31 AM
Reply: