f



Printing to as400 using cups

Hi all,

Has anyone been able to print to an as/400 from linux using 
cups?  
If so, what format did you use for the name, location,
and device uri? 

I'm using:

name:        nameofprinter
location:    //nameofas400
device:      'windows printer via SAMBA'
device uri:  smb://Workgroup/nameofas400/nameofprinteronas400

Problem is, this doesn't work and I think my "device uri" is
wrong, but don't know what to change it to.

Using the old linux box, I added this to my printcap and
it worked (still does actually):

nameofprinter:\
        :sd=/var/spool/lpd/nameofprinter:\
        :rm=amoroso3:\
        :rp=QUSRSYS/nameofprinter:\
        :lp=/dev/null:\
        :sh:

-- 
Julien Mills                             Amoroso's Baking Company
Tel: (215) 471-4740                                       IS Dept
email: julien@amorosobaking.com             www.amorosobaking.com
1
julien2489 (24)
8/31/2005 1:47:13 PM
comp.sys.ibm.as400.misc 9219 articles. 3 followers. Post Follow

2 Replies
802 Views

Similar Articles

[PageSpeed] 44

I'm not sure why you'd do this - almost everyone use tcp/ip attached 
printers with as400 now, so why wouldn't you just go directly to the 
printer itself?


julien mills wrote:
> Hi all,
> 
> Has anyone been able to print to an as/400 from linux using 
> cups?  
> If so, what format did you use for the name, location,
> and device uri? 
> 
> I'm using:
> 
> name:        nameofprinter
> location:    //nameofas400
> device:      'windows printer via SAMBA'
> device uri:  smb://Workgroup/nameofas400/nameofprinteronas400
> 
> Problem is, this doesn't work and I think my "device uri" is
> wrong, but don't know what to change it to.
> 
> Using the old linux box, I added this to my printcap and
> it worked (still does actually):
> 
> nameofprinter:\
>         :sd=/var/spool/lpd/nameofprinter:\
>         :rm=amoroso3:\
>         :rp=QUSRSYS/nameofprinter:\
>         :lp=/dev/null:\
>         :sh:
> 
0
Drew
8/31/2005 9:39:26 PM
On 2005-08-31, Drew Dekreon <drew_dekreonATchugachelectricDOTcom> wrote:

> I'm not sure why you'd do this - almost everyone use tcp/ip attached 

Well, we're not.

> printers with as400 now, so why wouldn't you just go directly to the 
> printer itself?

I would if I could.

And, after further digging, I found this on the cups website, if anyone
is interested in doing this, use this format for the "device uri":

    smb://username:password@workgroup/server[:port]/printer

This works for me, it's from the manpage of smbspool.

>> Has anyone been able to print to an as/400 from linux using 
>> cups?  
>> If so, what format did you use for the name, location,
>> and device uri? 
>> 
>> I'm using:
>> 
>> name:        nameofprinter
>> location:    //nameofas400
>> device:      'windows printer via SAMBA'
>> device uri:  smb://Workgroup/nameofas400/nameofprinteronas400

-- 
Julien Mills                             Amoroso's Baking Company
Tel: (215) 471-4740                                       IS Dept
email: julien@amorosobaking.com             www.amorosobaking.com
0
julien2489 (24)
9/1/2005 12:35:38 PM
Reply:

Similar Artilces:

Printing on AS400 via IBM AS400 Java Toolkit
Hello all, I'm working on a program that needs to send a print job to a printer connected to an AS/400. I've tried using the SpooledFileOutputStream and I've also tried using one of the SCS Writer classes. Neither solution is working. With the SpooledFileOutputStream I am at least able to create my print file, but when my program ends, the file is still not being printed. This program does not run on the AS400, it runs on a PC and connects to the AS400 via the toolkit classes. I know this part works as I am able to use the toolkit to access Data Queues, Files and Data Areas without a problem. Is there anyplace anyone can point me to see some examples of how to print a file using the AS400 Java Toolkit? Thanks in advance, Chuck Chuck, What printer data stream is used? or how was the printer data generated? I am wondering if the data stream being generated matches the data stream of the printer connected to the iSeries? What printer is attached to the iSeries and how is it configured? The iSeries info center has some Toolbox examples: Programming>Java>IBM Toolbox for Java>IBM Toolbox for Java Classes> Access Classes>Print>Creating... Dave Chuck wrote: > Hello all, > > I'm working on a program that needs to send a print job to a printer > connected to an AS/400. I've tried using the SpooledFileOutputStream > and I've also tried using one of the SCS Writer classes. Neither > solution is working. With the Sp...

AS400 to AS400 connection
Hi. What`s the rocommended method of copyting data beetween two AS400 (both on V5R1) ? Regards, Tom tom wrote: > Hi. > What`s the rocommended method of copyting data beetween two AS400 (both on > V5R1) ? Probably FTP. "tom" <tomeks@comp.pl> wrote in message news:c8c9u5$fb4$1@nemesis.news.tpi.pl... > Hi. > What`s the rocommended method of copyting data beetween two AS400 (both on > V5R1) ? > > Regards, > Tom > > It depends how often you are doing the copying & how much there is. If you want say one record but every 3 seconds then you can either store them up for a few hours days or weeks & use FTP, snads or a tape. Or you can do it realtime & use DDMF to zap each record to the other machine as its written. I actually save the data I want sending this way into a file which is read & deleted by a daemon style of job so that if comms or the other machine fails only the daemon is affected. FTP has its upside in that the target is easily resettable for say a unix machine but SNADS has an easy to use & understand message sent to the sender & recipient to verify arrival of the data. -- Jonathan Bailey. You could install the No Charge SW "Object Connect" from the OS CDs. Once setup you can issue cmds line SAVRSTLIB and SAVRSTOBJ. Give these cmds the LIB or OBJ list and the target system. It then saves/transfers/restores to the target system all with just the 1 SAVRSTxxx cmd. tom wro...

Microsoft uses IBM AS400's for development.
Not well known but Microsoft uses IBM AS400 machines with the Windows server card option to develop programs. This option is really a PC on a card but offers significant advantages over a stand alone pc in that it can support virtual sessions of Windows each of which can be rebooted as required without bringing down the other seesions or worse the rest of the machine. Microsoft is a huge IBM AS400 customer. Most people assume developers are using PC's sitting next to their work space. Fadl Ullah Jonnalagadda wrote: > Not well known but Microsoft uses IBM AS400 machines with the Windows > server card option to develop programs. This option is really a PC on > a card but offers significant advantages over a stand alone pc in that > it can support virtual sessions of Windows each of which can be > rebooted as required without bringing down the other seesions or worse > the rest of the machine. Microsoft is a huge IBM AS400 customer. Most > people assume developers are using PC's sitting next to their work > space. MS developers are using Win 2k3 and Win 2k8 servers as development machines too and not PC(s), with VMware. Fadl Ullah Jonnalagadda wrote: Plonk "Fadl Ullah Jonnalagadda" <fadlullah.jonnalagadda@gmail.com> wrote in message news:60deb8d3-5599-48d8-8667-6734e37a756b@31g2000vbf.googlegroups.com... > Not well known but Microsoft uses IBM AS400 machines with the Windows > server card option to develop programs. ...

AS400 to AS400 data transfer
Hi I need to place a trigger on a set of tables on an AS400 to fire off whenever new records are added to these tables. This trigger program will then transfer the data to another AS400 across a WAN. This will allow us to transfer orders from one system to another. Can anyone tell me how I would achieve this. Normally if it had been a PC I would have used an ODBC type application but I am not sure what is available to me for AS400 to AS400 data transfer. I know that we can transfer a SAVF by FTP but this is not a route I would like to go down. I would prefer to populate tables directly if possible. Thanks for any help offered Iain Iain wrote: > Hi > > I need to place a trigger on a set of tables on an AS400 to fire off > whenever new records are added to these tables. This trigger program > will then transfer the data to another AS400 across a WAN. This will > allow us to transfer orders from one system to another. Even if there may be multiple way, I think the best would be using a remote journal, on the target system a journal entry exit program will be evoked at event time, so it can apply new records to the target tables, then it can fire a new event if necessary. -- Dr.Ugo Gagliardelli,Modena,ItalyCertifiedUindoscrasherA�ejoAlcoolInside Spaccamaroni andate a cagare/Spammers not welcome/Spammers v�o � merda Spamers iros a la mierda/Spamers allez vous faire foutre/Spammers loop schijten/Spammers macht Euch vom Acker/Spamerzy wypierdalac' ...

AS400 Printing
Hello, I have an HP Laserjet 4200 printer with 3 trays, configured on my network. How do I set it up so that any AS400 spool file with formtype A4 automatically prints from the 3rd tray on the bottom and anything else with formtype *ALL or *STD prints out of the 2nd tray? Maybe someone has experienced the same thing and could head me into the right direction. Thanks, Shannon Go to Knowledge Base. http://www-912.ibm.com/s_dir/slkbase.nsf/slkbase Search for "tray" or "drawer". Do some experimenting. Default drawer in a spoolfile is "1". In which tray does that end up? Change a spoolfile to Drawer 2, 3 or even 4 to see if it ends up in the other trays. If you find Spoolfile Drawer Values which fits your needs then all you have to do is change the printerfiles with formtype A4 to a specific Drawer and all the other printerfiles to another Drawer. Or you mean you want this function only on this HP 4200? Then we have to think some more... -- Bengt "Shannon" <stilley@nbnet.nb.ca> wrote in message news:Dd3xc.55036$Np3.2437225@ursa-nb00s0.nbnet.nb.ca... > Hello, > > I have an HP Laserjet 4200 printer with 3 trays, configured on my network. > How do I set it up so that any AS400 spool file with formtype A4 > automatically prints from the 3rd tray on the bottom and anything else with > formtype *ALL or *STD prints out of the 2nd tray? > > Maybe someone has experienced the same thing and could head me into th...

IBM AS400
Does anyone have some notes, documentation or helful pointers about navigating, command language and DB2 on an AS400 for a guy who has done HP3000, Windows 2k/2k3, MS SQL, HP9000, IBM ES9000/UNIX, SCO UNIX? Ideally a commands cross reference qaulivalent would be terrific - I.E. HP3000 to AS400. Thanks much. P.S. I'm taking a role in a shop that runs its ERP system on this platform. Jim. ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.y...

* use in As400
I have been using as400 for agbout a month at work and i cannot figure out what the * means..... I understand wild card astericks perfectly like dir *.txt. However what does it mean before a word... the best I can figure out is that it means any... as in *DEV, *LIB. But what about *YES, *NO, etc.... Is there a good explanation or is it just an "AS400 thing" as a co-worker told me. Hi - On 10 Nov 2006 23:08:11 -0800, "greggiefen" <greggieFEN@gmail.com> wrote: >Is there a good explanation or is it just an "AS400 thing" as a >co-worker told me. It's just an OS/400 thing (actually it predates OS/400 back to CPF on the S/38) as a way to specify special values. For some things it could go either way. If a parameter only accepts a yes/no value, *YES/*NO or YES/NO or Y/N would work equally well. But for something like an object name, *ALL and ALL are _not_ the same thing. *ALL is all objects. ALL is an object called ALL. -- Ken http://www.kensims.net/ Opinions expressed are my own and do not necessarily represent the views of my employer or anyone in their right mind. Greg, The * in front of a parameter is a way to designate a reserved keyword without actually using up a real word. So, for example *YES is a reserved keyword but YES is not reserved. Many operating systems have reserved words that prohibit their use elsewhere. The AS/400 mitigates this by putting a * in front of the actual word to create a completel...

AS400 to AS400 connection issues
Hi All, We have two AS400's at different locations, and were able to passthrough and send files between both no problems. Last week one of our AS400's was moved to another location, with an IP change. We have updated the IP addresses on the other AS400 and can passthrough fine....however we can no longer send files from the new location. When I look at the distribution queue I see the following status: RTY-FAIL Any idea's as to what may be causing this? Thanks, Mike mot98@yahoo.com wrote: > Hi All, > > We have two AS400's at different locations, and were able to > passthrough and send files between both no problems. > > Last week one of our AS400's was moved to another location, with an IP > change. > > We have updated the IP addresses on the other AS400 and can passthrough > fine....however we can no longer send files from the new location. > > When I look at the distribution queue I see the following status: > RTY-FAIL > > Any idea's as to what may be causing this? run the CFGDSTSRV command and then look at all the menu options. Another command to look at is CFGTCP. -Steve Steve Richter wrote: > mot98@yahoo.com wrote: > > Hi All, > > > > We have two AS400's at different locations, and were able to > > passthrough and send files between both no problems. > > > > Last week one of our AS400's was moved to another location, with an IP > > chan...

Why use an AS400?
I work with a company that really pushes the AS/400. My big question is why? What does the AS/400 offer that you can't get on a conventional server? I know our code is written in RPG and uses a SQL database. Any input would be apprecaited. Thank you for your help. There are 4 main reasons 1. Reliability - almost never goes down. 2. Security - no known virus. 3. Usually, a lower TCO (total cost of ownership) 4. Keep the investment in existing code (who else runs RPG?) Numbers 1 & 2 are why you see most casinos, banks, insurance companies, and the like running this system. Lee wrote: > I work with a company that really pushes the AS/400. My big question > is why? What does the AS/400 offer that you can't get on a > conventional server? I know our code is written in RPG and uses a SQL > database. > > Any input would be apprecaited. Thank you for your help. Maybe the question should be, what would you rather do? On Mon, 24 Mar 2008 05:39:53 -0700 (PDT), Lee wrote: >I work with a company that really pushes the AS/400. My big question >is why? What does the AS/400 offer that you can't get on a >conventional server? I know our code is written in RPG and uses a SQL >database. Why not? I mean write on a paper *all* the things you (or your company) do with the black box (the most important to me are): - identity management - terminal server (not windows style) - development framework - application server (not in th...

AS400 to AS400 data transfer #2
Hi I need to place a trigger on a set of tables on an AS400 to fire off whenever new records are added to these tables. This trigger program will then transfer the data to another AS400 across a WAN. This will allow us to transfer orders from one system to another. Can anyone tell me how I would achieve this. Normally if it had been a PC I would have used an ODBC type application but I am not sure what is available to me for AS400 to AS400 data transfer. I know that we can transfer a SAVF by FTP but this is not a route I would like to go down. I would prefer to populate tables directly if possible. We are using 2 model 820's with OS400 V5 R2 Thanks for any help offered Iain ...

Migrating to a new system which uses AS400. Sites which have useful info?
Our company is in the process of installing a new ERP system called Frontier made by Friedman which runs on an AS400. We have a small I.T department and at present none of us have any AS400 / OS400 experience. What sites have good technical information that can be downloaded (preferably for free) regarding system admin of the iSeries hardware and software. On another topic as anyone here got personal experience of Frontier and what do they think of it? Cheers. There are a number of good books available. Check both: http://www.mcpressonline.com/ http://www.pentontech.com/education/ Check iSeries Network for an iSeries specific site: http://www.iseriesnetwork.com/ Sorry, never heard of Frontier. Sam "Nexus" <nexus@nospam.com> wrote in message news:ASScf.8047$c66.5600@newsfe3-gui.ntli.net... > Our company is in the process of installing a new ERP system called > Frontier made by Friedman which runs on an AS400. > > We have a small I.T department and at present none of us have any AS400 / > OS400 experience. > > What sites have good technical information that can be downloaded > (preferably for free) regarding system admin of the iSeries hardware and > software. > > On another topic as anyone here got personal experience of Frontier and > what do they think of it? > > Cheers. > Nexus - Frontier is very strong for volume custom configured products such as doors, windows, blinds and ...

Cannnot get Mac to print Linux Print Server using CUPS
I have an Epson C60 attached to a Linux Server using CUPS. All of my WIndows based clients (ME, 2000, XP) all print via the server just fine however, the mac does not. The mac utilizes OSX v10.3 and detects the printer on the net via the printer config utility. When I print, I keep getting a "waiting to connect error".. I try setting up the printer as an IP printer and I get a "busy" or "printer stopped" error. I never had a problem with the first version of OSX. Does any one have a suggestion for a fix? ...

print pdf from as400
Hi I know this topic came up before but no clear answer has been provided yet. I am looking for something that can print out my pdf files created from a j2ee application directly on the as/400 printers. isn't it possible to use something like lpr <<name of pdf file>> ? thomas Hi Thomas, Please check out http://www.as400tcpipprinting.com (software from Brooks). Most of my AS/400 users of OctoTools software, used for PDF creation, forms design and document management, utilize Brook's RPM software . You should find exactly what you need at thier site. Thanks, Larry T. Hi Larry I have checked the website but it requires the intervention of a windows pc. Do you have any alternatives? T "Larry T." <larry-nospamx@jbmsystems.com> wrote in message news:Fo3qc.49016$L8.35483@nwrdny02.gnilink.net... > Hi Thomas, > > Please check out http://www.as400tcpipprinting.com (software from Brooks). > Most of my AS/400 users of OctoTools software, used for PDF creation, forms > design and document management, utilize Brook's RPM software . You should > find exactly what you need at thier site. > > Thanks, > > Larry T. HI, Sorry, all these solutions run on a windows pc or server. Most of our clients either have a windows pc or server or can get one pretty inexpensively. They usually like to run this type of utility and application on a machine that doesn't use their AS/400 resources (leave that for the ...

Buying used AS400
In 2001 I lost my job as an RPG/COBOL programmer of several years and ended up with jobs in the last 6 years that were not involved with AS400 at all. So now as a consultant of a few months have a client that needs data migrated off of their AS400 that had no PC's attached and have to work on getting a workstation set up with emulation card to download the data. As a result of this, I have decided to look into buying a used AS400 that I can used to download client data from tape as well as have RPG & QUERY400 compilers as a part of it. I think I need to look for a 170 or 270 but not sure what the difference between the 2 is? And I have found alot of places to buy the CPU with the OS but where do I find the other software to install on it. Also, has anyone had any experience in using the Nlynx 3xtwin PCI card to connect and download data using PCSupoort? Thanks MP 1st a home i5 (AS/400) is expensive to maintain. It's not just the hardware but the software licenses and hardware upkeep. I have had to barter for replacement features several time to keep my machine alive. 2nd to deal with client tapes you need compatible drives. Since there are so many formats this too can get expensive. I have had to FTP some very large files around because of not having the right tape drive. This may not be a problem if you have the kind of bandwidth I have. 3rd no one uses a PC emulation card anymore. Just setup your home network to work with iSeries Access via TC...

printing using CUPS?
Hi, I checked printers supported in CUPS, and found out my printer does not suppported in CUPS. So,I'd like to know unsupported printer from CUPS , 1)Should I code new device driver to get reconnized from CUPS. 2)serial printer is also supported from CUPS? Thanks.. On Fri, 17 Aug 2007 03:40:49 +0900, google-rambo88 typed this message: > Hi, > > I checked printers supported in CUPS, and found out my printer does > not > suppported in CUPS. > > So,I'd like to know unsupported printer from CUPS , > > 1)Should I cod...

AS400 color print?
We have as/400 v5r1 and iSeries v5r3. Is it possible to get color print with HPT or any other product? (AFP product) On Apr 24, 7:09 am, "hmda" <kantat...@gmail.com> wrote: > We have as/400 v5r1 and iSeries v5r3. Is it possible to get color print with > HPT or any other product? (AFP product) I would like to know this also. ...

AS400 Printing queries
Hi, I am having trouble trying to figure out why when I print query spool files, they only print landscape not portrait. There isn't anywhere in the query definition that allows me to print landscape or portrait. Do you know of a way I can do this? Thanks in advance!! Shannon Set the number of columns to 80 in the "Select output type and output form" option, second screen Form size - Width. - Bob Comer "Shannon" <stilley@nbnet.nb.ca> wrote in message news:NLfPb.68613$IF6.1663775@ursa-nb00s0.nbnet.nb.ca... > Hi, > > I am having trouble trying to figure out why when I print query spool files, > they only print landscape not portrait. There isn't anywhere in the query > definition that allows me to print landscape or portrait. Do you know of a > way I can do this? > > Thanks in advance!! > > Shannon > > > > > > I forgot to mention that it only prints landscape on laser printers. It prints as it should on our wide impact printer. Shannon "Shannon" <stilley@nbnet.nb.ca> wrote in message news:NLfPb.68613$IF6.1663775@ursa-nb00s0.nbnet.nb.ca... > Hi, > > I am having trouble trying to figure out why when I print query spool files, > they only print landscape not portrait. There isn't anywhere in the query > definition that allows me to print landscape or portrait. Do you know of a > way I can do this? > > Thanks in advance!! > > ...

How to use AS400 journaling?
Hi, I am using V5R4. Is there any way to see a table journal in the form of SQL that was actually run on it? Can I see that at some date and some time, someone did an UPDATE, or INSERT or DELETE? Can I see the full SQL query that was executed (sort of like what is saved with interactive SQL sessions, but for all users)? The output of DSPJRN is very criptic, I'm looking for something simpler. On Oct 9, 5:59 am, simun.se...@gmail.com wrote: > Hi, > > I am using V5R4. Is there any way to see a table journal in the form > of SQL that was actually run on it? Can I see that at some date and > some time, someone did an UPDATE, or INSERT or DELETE? Can I see the > full SQL query that was executed (sort of like what is saved with > interactive SQL sessions, but for all users)? > > The output of DSPJRN is very criptic, I'm looking for something > simpler. You'll have to start a database monitor job to see this but there's no way to limit it to a particular table. You can limit it by job and I think user (this option is new to V5R4) or you can start one for the entire system but you'll need lots of free DASD to store all of the information it produces and it will slow the system down. Matt SQL is not the only way to delete or insert rows. The program name and job attributed to the action defines the where, the user defines the who, and of course the date/time defines the when; what the identified program does, defines the ...

AS400 for Home Use
Hi all, I've been considering picking up a used as/400 and would appreciate any comments on the feasibility of purchasing a low end machine for development use at home. I have a background in rpg/cobol development but am unsure of hardware, processor and licensing issues involved. There seem to be many 170s and older interactive boxes with V4R4 available but can anyone comment on licensing, the availability of PDM, compilers and other LPPs in the used marketplace, etc? V4R4 with RPG, Cobol, etc would satisfy my initial requirements, but upgradeability to V5R1 with WDStudio tools would be an eventual concern. I would appreciate any advice on the minimum processor, memory requirements for any WAS development, webfacing etc for a single user in a non production environment. Thanks in advance. Allan Smallest current model is 800, but that's probably still a little too pricey for at home. You might be able to pick up a used 250. Either way, software has to be licensed from IBM. Another option is Baby/400, from California Software. I've never seen or used it, but they have a long history. (First product of theirs I heard of was Baby/36.) It runs on a PC, so hardware is inexpensive. It includes editor (like SEU), compilers, and database that mimics PF/LFs. If you only need to do some development and testing, this might be enough. But it is not OS/400. I'm pretty sure it won't have support for OS functions such as communications (SNA, TCP/IP), security, and...

From a AS400 with a CCSID to another AS400 with different CCSID
Hi all, I've the following issue: - I have to move data from a AS400 with CCSID 65535 (no conversion) to another AS400 with CCSID 37 I'm using DDM files on the second AS400 linked to the first AS400, but reading DDM files I have the problem that data are different in the special characters... So I changed my job session CCSID to 65535 with CHGJOB; with that I can see correctly DDM files data, but not the local files... What do you suggest to do? Many thanks in advance. Fabrizio On 09-Jun-2011 05:47 , Fabrizio wrote: > > I've the following issue: > > - I have to move data from a AS400 with CCSID 65535 (no conversion) > to another AS400 with CCSID 37 > > I'm using DDM files on the second AS400 linked to the first AS400, > but reading DDM files I have the problem that data are different in > the special characters... > > So I changed my job session CCSID to 65535 with CHGJOB; with that I > can see correctly DDM files data, but not the local files... > > What do you suggest to do? > The system CCSID QCCSID is effectively moot in that scenario as far as I can recall. What do matter are the CCSID of the job opening the file and then reading the data, and the CCSID of the columns of the file being opened. When the job is set to a proper CCSID, then whenever the data is also "tagged" properly with a CCSID [e.g. column of a table with a non-hex (non-65535) CCSID], the database will convert the dat...

AS400 Printing Issue
I have setup a remote queue pointed at a Netgear PS101 which is connected to an Comapq LG15 Lineprinter. The printer prints as expected with a few quirks. At the very top of the page a string appears OUOp10 00h012v0s0b003T0B@30008C005C0p17.... and at the beginning of EVERY line +00216H. The LG printer can emulate several other printers, including the EPSON FX and the IBM Proprinter XL III I'm sure that it's a problem with emulation, but I cannot seem to get this working properly. The queue settings follow. Just looking for a push in the correct direction. Thanks. ~k --- chgoutq Output queue . . . . . . . . . . > P1REPLACE Name Library . . . . . . . . . . . > QUSRSYS Name, *LIBL, *CURLIB Maximum spooled file size: Number of pages . . . . . . . *NONE Number, *SAME, *NONE Starting time . . . . . . . . Time Ending time . . . . . . . . . Time Order of files on queue . . . . *FIFO *SAME, *JOBNBR, *FIFO Remote system . . . . . . . . . *INTNETADR Character value, *SAME... Remote printer queue . . . . . . 'P1' Character value, *SAME... Writers to autostart . . . . . . 1 1-10, *SAME, *NONE Queue for writer messages . . . QSYSOPR Name, *SAME Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB Connection type . . . . . . . . *IP *SAME, *SNA, *IP, *IPX... Destination type . . . . . . . . *OTHER *SAME, *OS400, *OS400V2... Host print transform ....

as400 printing
Hi Guys: I just found this newsgroup. I'm an IT Manager at a firm with an AS400, just started the job. I'm not an AS400 guy. We have an AS400 running V5R3 (I believe). Our users connect to a vertical app. one of my users is using the IBM Client Access software to print a report to a local printer. the report is supposedly defined on the AS400 as a landscape report. However, when she prints it out to her local printer, the orientation is portrait. When the report is printed to a different printer, it comes out landscape. I've no idea where to begin on this. Can someone help me figure out how to make it print out landscape on her local printer? I went into her printer properties and set the printer default to landscape with no luck getting the report to print landscape. so there must be something that is injecting the printer control codes to tell the device to print portrait. i'm not sure if it's these PDT files i've heard about, or whether it's the print device setup in the AS400 itself. The end user says that a previous IT person used to be able to make a change at the client side to have it come out landscape. i'm not sure how. Help! Somebody please give me a clue! (yes, I don't have one!) :) You would need to check to see how the spooled file attributes are set on the i5/OS (AS400) side. The way to do this is to use WRKSPLFA (option 8 from WRKOUTQ, WRKSPLF or WRKJOB OPTION(*SPLF)) and scroll down through the attributes....

PowerPC extensions for IBM AS400
Looking for an explanation or documentation on the as400 specific extensions to the PowerPC instruction set. Pointers on the as400 are stored as 16 byte values. The LQ ( load quad word ) and STQ ( store quad word ) instructions are used to load and store those pointers. Here is PPC assembler code that loads a pointer from an EA into a register: LQ 24, 0x1e50(30), 6 SELRI 26, 25, 0, 41 LQ loads the 16 bytes stored at EA reg30 + 0x1e50 into reg24 and reg25. The next SELRI stmt does something to reg25 and places the result in reg26. Does anyone know what the 3rd opera...

Print 255 Colon on AS400
PARAMETERS on link below (STAMP) http://nuke.risorsesoftware.it/LinkClick.aspx?fileticket=jkcP%2bYI4XCU%3d&tabid=82&mid=433 Pagesize 76x255 Lpi 09 OVRFLW 76 PAGRTT 90 FONT 290 Gothic TEXT Uniformly Spaced 27 Cpi Register on site www.risorsesoftware.it for more tips and programs open source Print on system type : 3812 Physical printer : HP Laserjet 1320tn This tip is valid for more other printers For problems contact me on www.risorsesoftware.it Bye The Cat ...

Web resources about - Printing to as400 using cups - comp.sys.ibm.as400.misc

Printing - Wikipedia, the free encyclopedia
This article is about the process of reproducing text and images. For the handwriting method often called printing, see block letters . For other ...

Help Mr Plumbum sort his printing box in this matching game
... path in Linken, an elegant puzzler or Meteors are falling, dont get squished in Danger Dodgers . Mr Plumbum Help Mr Plumbum sort his printing ...

Make your own 'Ghostbusters' trap via 3D printing
When ghosts go bump in the night, will you have the right equipment to bust them? Make this replica ghost trap from the original "Ghostbusters" ...

Europe To Use 3D Printing To Build Permanent Moon Base By 2030
Europe To Use 3D Printing To Build Permanent Moon Base By 2030

Tokyo students develop architectural 3D-printing pen
A group of University of Tokyo students overseen by architect Kengo Kuma have developed a 3D-printing pen that can be used to create complex ...

Barclays' 'MakerSpaces' offer 3D printing to local businesses
The worlds of banking and technology intersect at many points, but you'd hardly consider 3D printing a shared interest. In Barclays' "MakerSpaces," ...

3D Printing Your Own Braces Works, Is a Terrible Idea
At the age of nine, I became the first kid in my elementary school class to get braces. They did their job, but by the time I left college, I’d ...

Join Us at the Greatest 3D Printing Festival on Planet Earth
Winter is hanging on like clinical depression, which means it’s that time again for the greatest 3D-printing festival on the planet Earth. It’s ...

3-D Printing: Gigi The Macaw Gets First-Ever Titanium Prosthetic Beak (PHOTOS)
Gigi the macaw is the first-ever recipient of the world's first 3-D-printed titanium beak.

Archinaut, A 3D Printing Robot To Make Big Structures In Space
Historically, the only way to get anything into orbit has been by rocket; a process that is massively expensive, cumbersome, and presents a slew ...

Resources last updated: 3/24/2016 2:06:49 PM