f



TCPIP startup on the iSeries

We have a startup program, like most of you, that runs when we IPL our 
iSeries.

Some of the things we run in our startup program expect TCP/IP to be fully 
running when they start.  Unfortunately, TCP/IP takes a while to start and 
some of these other programs crash or don't fully start because TCP/IP isn't 
fully up and running.  We put delays in our startup program to try to 
mitigate the problem.

Is there a way to test whether TCP/IP has fully started?  I could put these 
jobs at the end of the startup CL and loop until TCP/IP was fully started 
before I kicked them off.

TIA,

chuck
Opinions expressed are not necessarily those of my employer. 


0
sorry45 (254)
4/13/2005 6:43:07 PM
comp.sys.ibm.as400.misc 9219 articles. 3 followers. Post Follow

3 Replies
709 Views

Similar Articles

[PageSpeed] 52

I like to start my interface and then start my other TCP servers, most
folks don't run all of them and to save time and resources you might
only want to start what you need.  Which are you needing the most, like
TELNET.  I am sure you could get fancy and check for things and loop
etc.  If you just need TELNET and the interface this shouldn't take to
long to start, if it's websphere or HTTP etc then it might take a while.

0
4/13/2005 6:55:06 PM
Depends on what you really mean, is IP started on the adapter or are
the various IP servers started.

If what you mean is is a particular IP Interface active, you can check
for message TCP1B03 in the QTCPIP Job. There should be one for each
interface that is activated. You could also use the List Network
Interfaces API (QtocLstNetIfc) to check a particular interface status
or use Retrieve TCP/IP Attributes API (QtocRtvTCPA) to check the IP
stack status.

If you mean did the particular server start yet, i think that you are
going to have to check if particular jobs are started or for specific
messages. Some of the servers drop messages in the operator message
queue or history log but i don't know that they all do. You could try
using the List Network Connections API (QtocLstNetCnn) to see if the
iseries is listening on a particular port that would be assigned to
that service.

Matt 

Matt

0
4/13/2005 8:31:03 PM
CHGIPLA STRTCP(*NO)
add the QSYS/STRTCP command to the startup program before the things that 
expect TCP/IP to be active.


"Chuck Ackerman" <Sorry@NoSpam.com> wrote in
news:%Kd7e.1285$J12.65@newssvr14.news.prodigy.com: 

> We have a startup program, like most of you, that runs when we IPL our
> iSeries.
> 
> Some of the things we run in our startup program expect TCP/IP to be
> fully running when they start.  Unfortunately, TCP/IP takes a while to
> start and some of these other programs crash or don't fully start
> because TCP/IP isn't fully up and running.  We put delays in our
> startup program to try to mitigate the problem.
> 
> Is there a way to test whether TCP/IP has fully started?  I could put
> these jobs at the end of the startup CL and loop until TCP/IP was
> fully started before I kicked them off.
> 
> TIA,
> 
> chuck
> Opinions expressed are not necessarily those of my employer. 
> 
> 

0
nospam21 (19047)
4/18/2005 3:49:15 PM
Reply:

Similar Artilces:

Is IBM killing iSeries? Yes, IBM is the iSeries muderer!!!!!
This is a multi-part message in MIME format. ------=_NextPart_000_0085_01C4263B.65141F40 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable IBM should know, it's just herself is killing iSeries/400. He invest = too much money in Webfacing, HATS, PASE, Web Access and RPG V .... but = how many users are planing to use them??? almost NONE! IBM should focus = on how to imporve the running time performance of Websphere on iSeries, = How let user can build java/web application as easy as SDA. AS/400 won = in 1988 because compare with the Unix, VAX/VMS and DOS, AS/400 is such = easy to be used to create application system. but now, Java on iSeries = is nightmare. Compare with Unix, Linux and Window platfrom. Websphere on = AS/400 has very low performance, It's very difficult to be install, Very = bad SQL/JDBC performance, to build application is as difficult as unix = and other open system, even more. Much expensive than unix, linux and = windows..... so Why user choose iSeries???? almost all my customer = complain as I said above everyday... Honestly If I was ordered to build = a web base application, I'd rather use Linux, but not OS/400! OS/400 can = not give me almost none benefit for Web Application! also AS/400 is not = a very good DB server too. Just wish I could install Linux and AIX on AS/400 box without the OS/400 = primary partition soon. And hope IBM sell the new box as cheaper as = pSeries (RS/6000).=...

TCPIP USB MISC LIKE GPIB MISC
I used to use GPIB misc a lot to send code through GPIB after VISA is closed to set instrument to local, etc. Now I am try to control the instrument through USB and TCPIP, it seems there is no corresponding MISC VI for USB and TCPIP such as GPIB MISC. Is there any way to do 'loc' function under TCPIP/USB connection after VISA is closed? Hello Qualcomm, &nbsp; From my understanding of your situation, you can have a similar functionality by using a property node to check the status of the device from the VISA palette.&nbsp;&nbsp;By&nbsp;using the&nbsp;property node&nbsp;you achieve similar functionality&nbsp;to the GPIB Misc VI.&nbsp; <a href="http://digital.ni.com/public.nsf/allkb/1C8802FDAF0EEABE86256B6000095724?OpenDocument" target="_blank">How Do I Set and Get the Status of the GPIB REN Line in LabVIEW?</a>&nbsp;is a KnowledgeBase article further expounds upon this idea. ...

Printing on AS400 via IBM AS400 Java Toolkit
Hello all, I'm working on a program that needs to send a print job to a printer connected to an AS/400. I've tried using the SpooledFileOutputStream and I've also tried using one of the SCS Writer classes. Neither solution is working. With the SpooledFileOutputStream I am at least able to create my print file, but when my program ends, the file is still not being printed. This program does not run on the AS400, it runs on a PC and connects to the AS400 via the toolkit classes. I know this part works as I am able to use the toolkit to access Data Queues, Files and Data Areas without a problem. Is there anyplace anyone can point me to see some examples of how to print a file using the AS400 Java Toolkit? Thanks in advance, Chuck Chuck, What printer data stream is used? or how was the printer data generated? I am wondering if the data stream being generated matches the data stream of the printer connected to the iSeries? What printer is attached to the iSeries and how is it configured? The iSeries info center has some Toolbox examples: Programming>Java>IBM Toolbox for Java>IBM Toolbox for Java Classes> Access Classes>Print>Creating... Dave Chuck wrote: > Hello all, > > I'm working on a program that needs to send a print job to a printer > connected to an AS/400. I've tried using the SpooledFileOutputStream > and I've also tried using one of the SCS Writer classes. Neither > solution is working. With the Sp...

IBM AS400
Does anyone have some notes, documentation or helful pointers about navigating, command language and DB2 on an AS400 for a guy who has done HP3000, Windows 2k/2k3, MS SQL, HP9000, IBM ES9000/UNIX, SCO UNIX? Ideally a commands cross reference qaulivalent would be terrific - I.E. HP3000 to AS400. Thanks much. P.S. I'm taking a role in a shop that runs its ERP system on this platform. Jim. ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.y...

Iseries/AS400
Hi, What software do I need to make the files in AS400 to tables in Microsoft Access? My hope is to query information from Access, instead of running queries in AS/400 then exporting the data manuall, then importing the data to Excel. Any help will be greatly appreciated. James Mos.StaLL@gmail.com writes: > What software do I need to make the files in AS400 to tables in > Microsoft Access? My hope is to query information from Access, > instead of running queries in AS/400 then exporting the data manuall, > then importing the data to Excel. Any help will be greatly > appreciated. The iSeries software package for your PC contains an ODBC-driver which Access should be able to use to do a remote connection. I believe that currently it is called "IBM iSeries Access for Windows". -- Thorbj�rn Ravn Andersen And if you have that software already installed, then you can select whatever columns and rows directly from Excel [under Data tab, Trsnsfer from iSeries to generate a .dtf] without first copying into tables in Access; i.e. no reason to add yet another query/copy when the intent was to eliminate that type of activity in the first place. Regards, Chuck -- All comments provided "as is" with no warranties of any kind whatsoever. Thorbjoern Ravn Andersen wrote: > Mos.StaLL@gmail.com writes: > >> What software do I need to make the files in AS400 to tables in >> Microsoft Access? My hope is to query informa...

Re: SYS$STARTUP:MMOV$STARTUP.COM -- lacks something (priority)
From: lewis@mazda.mitre.org (Keith A. Lewis) > [...] > > Actually the problem is recurring in a different way since I moved the > music library to a Linux disk and now play it over NFS. Thinking of > copying to a scratch directory on VMS before playing... if I can't figure > out how to raise the priority of the NFS-serving Linux processes. Locating the bottleneck could help. Is the sloth at the server or the client? Can the (VMS) NFS client do more read-ahesd or caching, perhaps? > Do you get a popping sound between songs due to audio device resets? I have &...

Re: SYS$STARTUP:MMOV$STARTUP.COM -- lacks something (priority) #2
From: hoff@hp.nospam (Hoff Hoffman) > I've passed this along to one of the engineers familiar with the MMOV > product for his consideration -- though if you require a fix for this, > please contact the support center directly. (I can't commit to having > this fixed, release of an ECO kit, etc.) I'm just a (peon) hobbyist, so formal support is generally not an option. My fixes (commenting out the troublesome F$CONTEXT() for shutdown, and adding a suitable /PRIORITY qualifier for startup) seem satisfactory, so I'm happy enough, at least on these problem...

Tifflib on Iseries / As400
I'm trying to use tifflib to convert TIFFs to PDF. It works fine, but the resulting image is scaled down on the page about half size. Does any one help me ?? Hi, Most likely the pdf document created by the conversion process you have outlined will end up as a raster image (dot pattern) at a fixed resolution (dots per inch or dots per centimeter). If the printing process you executed was not able to match the resolution of the pdf document and the resolution active within the printer, a higher resolution active within the printer (more dots per inch or centimeter than what was used in the pdf document) will cause the document to shrink as you have described. HTH Best Regards, /Paul -- Paul Tykodi Principal Consultant TCS - Tykodi Consulting Services LLC E-mail: ptykodi@tykodi.com On 11 Mar 2005 23:49:53 -0800, gio.cot@virgilio.it wrote: >I'm trying to use tifflib to convert TIFFs to PDF. It works fine, but >the resulting image is scaled down on the page about half size. > > >Does any one help me ?? ...

DSKUSE in iSeries AS400
Hi, im new here, and im new on the system, i would like to ask on how to enroll libraries and objects in DSKUSE. any ideas? thank you.. ...

iSeries (AS400) IQ, and Exchange
I have a product on my iSeries box, IQ (Interactive Query) which can create PDF files of reports, and supposed to have the ability to e-mail them by relaying through our mail server, which is exchange. I can send those PDF files to any outside e-mail addresses (hotmail, gmail, etc) however if I send that same file to my internal address on our domain, the e-mail seems to just simply not get sent. The IQ support line says that since we can relay to a hotmail or gmail, the iSeries box is set up right. Question is, why is Exchange not sending the messages internally? Thx! Hmmmmm... I think I've seen this before, but I don't remember the exact cause. Try turning on SMTP journaling using CHGSMTPA JOURNAL(*YES) and then try sending a message to an internal address. You can then review the journal entries and possibly find a clue there. The system records various movements through Mail Server Framework and SMTP to a journal named QZMF, so you would use a command like: DSPJRN QZMF FROMTIME(031405 203000). I always enable SMTP journaling wherever I setup SMTP and just leave it on. The AS400 manages the journal receivers automatically, so unless you have an extremely high volume of SMTP traffic, it will be unobtrusive. One last thing that comes to mind is that the AS/400 may be resolving the local domain via the host table. Do a CFGTCP, option "10. Work with TCP/IP host table entries" and check if there is an entry with just your domain (no hostname). So if ...

Tcl/Tk on iSeries/AS400
I have spoken many AS400 users they want to modernisize their aplications without to install the GUI-part on the (fat) client. They wish to let the GUI part on the AS400 server and send the screen (GUI) to the client (like X-server). There is one solution in this art using Java on the AS400 server. Question: do you know somebody who is using Tcl/tk on this platform or do you mean it is a big job to transfer Tcl/Tk on this platform? Thanks -- Vaclav Snajdr The Wiki has AS400 info (under the title OS/400) at http://mini.net/tcl/9088 ...

AS400 to AS400 connection
Hi. What`s the rocommended method of copyting data beetween two AS400 (both on V5R1) ? Regards, Tom tom wrote: > Hi. > What`s the rocommended method of copyting data beetween two AS400 (both on > V5R1) ? Probably FTP. "tom" <tomeks@comp.pl> wrote in message news:c8c9u5$fb4$1@nemesis.news.tpi.pl... > Hi. > What`s the rocommended method of copyting data beetween two AS400 (both on > V5R1) ? > > Regards, > Tom > > It depends how often you are doing the copying & how much there is. If you want say one record but every 3 seconds then you can either store them up for a few hours days or weeks & use FTP, snads or a tape. Or you can do it realtime & use DDMF to zap each record to the other machine as its written. I actually save the data I want sending this way into a file which is read & deleted by a daemon style of job so that if comms or the other machine fails only the daemon is affected. FTP has its upside in that the target is easily resettable for say a unix machine but SNADS has an easy to use & understand message sent to the sender & recipient to verify arrival of the data. -- Jonathan Bailey. You could install the No Charge SW "Object Connect" from the OS CDs. Once setup you can issue cmds line SAVRSTLIB and SAVRSTOBJ. Give these cmds the LIB or OBJ list and the target system. It then saves/transfers/restores to the target system all with just the 1 SAVRSTxxx cmd. tom wro...

link table IBM AS400
Hi. Sorry for my english but I have MS Access in italian. My problem is by link a table from IBM As400 (with > 100.000 rows). The output of the table is many #ELIMINATO (in english "delete" / "erase".. I dont't know the exact message). I have tried with "requery" or recreating the link without results. If I *import* the table from AS400 it works perfectly without problems. Here an abstract txt BOLAZI;BOLCLI;BOLDBO;BOLNBO;BOLCAU;BOLNPR;BOLTRE;BOLMAT;BOLDES [........] [........] ;;;;;;;#Eliminato;#Eliminato ;;;;;;;#Eliminato;#Eliminato ;;;;;;;#Eliminato;#Eliminato 0;474;990204;354;10;1;1; 936;PC Intel Pentium II 400 Miditower 0;474;990204;354;10;4;1; 1890;CD-ROM drive 36X 0;474;990204;354;10;5;1; 1692;HD-SCSI 4.5 Gb IBM Ultrastar WIDE 7200 0;474;990204;354;10;6;1; 1497;HD-SCSI 9.1 Gb IBM DDRS-39130 UWIDE [........] Thanks in advance M. "Mire" <mary@hotmail.com> wrote in message news:buo9eo$k39dq$1@ID-57790.news.uni-berlin.de... > Hi. > Sorry for my english but I have MS Access in italian. > My problem is by link a table from IBM As400 (with > 100.000 rows). > > The output of the table is many #ELIMINATO (in english "delete" / "erase".. > I dont't know the exact message). > I have tried with "requery" or recreating the link without results. > > If I *import* the table from AS400 it works perfectly without problems. > &...

AS400/iSeries jobs in Germany
I am looking for short-term as400/iSeries poistions in the north of Germany. Does anyone know good german jobsites specialised in ICT jobs? (website in german language is not a problem) Thanks in advance! ...

PowerPC extensions for IBM AS400
Looking for an explanation or documentation on the as400 specific extensions to the PowerPC instruction set. Pointers on the as400 are stored as 16 byte values. The LQ ( load quad word ) and STQ ( store quad word ) instructions are used to load and store those pointers. Here is PPC assembler code that loads a pointer from an EA into a register: LQ 24, 0x1e50(30), 6 SELRI 26, 25, 0, 41 LQ loads the 16 bytes stored at EA reg30 + 0x1e50 into reg24 and reg25. The next SELRI stmt does something to reg25 and places the result in reg26. Does anyone know what the 3rd opera...

PL/1 on the AS400 and iSeries
Can someone help? I want to take some mainframe PL/I code, port the code to iSeries,do a little re-engineering then compile and run it. Reuse of legacy software - great ! I know IBM no longer offer full support for PL/I on AS400/iSeries, however, I assume I can still get the compiler and associated software to allow me to do this exercise ? All answers gratefully accepted ! -- Posted via http://dbforums.com ...

ADO & the iseries AS400
Has anyone been able to get ADO working with IBM AS400? Yes, what OS version are you working with ? is you install client access the check the oledb drivers and voila example : METHOD ConnectToAs400() AS LONG PASCAL CLASS DB2file //p default connection to AS400 //s // try IF Empty(SELF:db2User) .and. Empty(SELF:db2Password) SELF:INloggen() ENDIF IF SELF:oConn == NULL_OBJECT // Set the default connection for better error reports SELF:oConn := AdoConnection{} SELF:oConn:ConnectionString := "Provider=ibmda400; Data Source=IPadress;Us...

IBM.DATA.DB2.iSeries
Hello, I connect from C#.Net to an iSeries. With OleDb I have no problems to do so. But I would prefer to use Ibm.data.DB2.iSeries.dll. When I open the connection I get first the logondialogue and then after entering the correct password I get an ExecutionEngineException. Does anyone have some hint for me? Thank you for your help Hannes Here is the small code: string connString="Data Source=192.168.12.10; "; con=new iDB2Connection(); try { con.ConnectionString=connString; con.Open(); } catch(Exception excpt) { MessageBox.Show(excpt.Message); } Check the following redbook: http://www.redbooks.ibm.com/abstracts/sg246440.html?Open Hannes wrote: > Hello, > > I connect from C#.Net to an iSeries. With OleDb I have no problems to > do so. But I would prefer to use Ibm.data.DB2.iSeries.dll. When I open > the connection I get first the logondialogue and then after entering > the correct password I get an ExecutionEngineException. Does anyone > have some hint for me? > > Thank you for your help > Hannes > > Here is the small code: > string connString="Data Source=192.168.12.10; "; > con=new iDB2Connection(); > try > { > con.ConnectionString=connString; > con.Open(); > } > catch(Exception excpt) > { > MessageBox.Show(excpt.Message); > } > ...

Free IBM iSeries Roadshow
SEE OUR TECHNOLOGIES IN ACTION - FREE IBM EVENT You've Heard About It. Now see it Now see it ! This roadshow is designed to provide LIVE DEMONSTRATIONS of over 30 functions and applications within i5/OS, Linux, AIX and Windows - all Running on an iSeries i5. Solutions demos include, but are not limited to: WebFacing, HATS, WebMin for Linux administration, Windows administration, AIX, IBM Workplace, eCommerce, iSeries Access for Web, Portal, etc. Agenda 8:30 am - 9:00 am Power Breakfast and Registration 9:00 am - 9:30 am Power up your business with i5 9:30 am - 12 noon i5 Live in Action... Be amazed by what you already have Session 1: Drive business efficiencies with leading edge technologies including portal, collaboration and e-commerce. Session 2: Drive value to your business with your current investment. Simplify your infrastructure to reduce cost and complexity. 12 noon - 1:30 pm Lunch: High Availability - The Next Generation of Technologies meeting your Sarbanes-Oxley Requirements To register Call 1-800-957-4511, ext. 201 Or online at www-926.ibm.com/events/smb LOCATIONS: Tuesday, June 7 Buffalo, NY Buffalo Marriott Niagara 1340 Millersport Highway Amherst, NY 14221 Wednesday, June 8 Syracuse, NY The Marx Hotel & Conference Center (Radisson Syracuse) 701 East Genesee Street Syracuse, NY 13210 Thursday, June 9 Albany, NY Holiday Inn Albany Turf on Wolf Road 205 Wolf Road Albany, NY 12205 Friday, Jun...

LAT to TCPIP using sys$qiow
We have a customer who, using LAT with sys$qiow to communicate serial with other systems, wants to move to IP. Examples would be welcome, preferrably in PL/I but other languages would be OK Tom --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.655 / Virus Database: 420 - Release Date: 4/8/2004 "Tom Linden" <tom@kednos.com> writes in article <NDEMLKKEBOIFBMJLCECIEEHODCAA.tom@kednos.com> dated Wed, 28 Apr 2004 07:50:46 -0700: >We have a customer who, using LAT with sys$qiow to communicate >serial with...

ibm tech test 974 iseries
any one have any hints and help on how to pass 974? anyone pass ? how many trys? ...

Printing to Nashua printers from iSeries AS400
Hi, I'm trying to configurate device descriptions to NASHUA D4xx-series printers but I didn't manage so far. Does anybody recognize this problem and is there a solution? Thanx Hi Willem Don't know the Nashua Printers and didn t find on the web. Usually if I can't find the Printer in HPT lists I take Epson LW2550 Emulation for matrix printers and HP4 for Laserboxes What type of printer is it? What are supported emulations How do you want to connect it to your as400? (LAN/IP, par on Workstation, par on PC, Twinax ) Daniel On 31 Jul 2003 04:18:32 -0700, willem@willemdeweerdt.com (Willem de Weerdt) wrote: >Hi, > >I'm trying to configurate device descriptions to >NASHUA D4xx-series printers but I didn't manage >so far. Does anybody recognize this problem >and is there a solution? > >Thanx Hi Daniel, I'm trying to configure the device as an ip-printer and I'm not sure at the moment if 9100 is the right port. Maybe some other parameters has to be reset, or something like that. First I tried to configure it like a HP-printer, without success. Well I think I tried everything possible. thanx Daniel <nospampls.lapin@datacomm.ch> wrote in message news:<0j6iivkdjb79p9gk2tmpmg044dnqcvdq5b@4ax.com>... > Hi Willem > > Don't know the Nashua Printers and didn t find on the web. > > Usually if I can't find the Printer in HPT lists I take Epson LW2550 > Emulation for matrix printe...

IBM AS400 certfication test papers
Aprax Consulting believes in developing professionals who believe in themselves and are equipped with the latest state of the art in their respective fields, professionals who are confident and can compete in the challenging world. The endeavor is to inculcate a desire for continuous improvement, a sense of healthy competition, and sensitivity towards ethical and moral values. Aprax consulting offers all types of certification test papers, dumps with 100% assurance of passing. 100% Money refunded if failed (except courier charges). All IBM certification including Mainframe certification, AS400 certification test papers available. IBM MAINFRAME DB2 certification IBM AS/400 RPGILE certification Contact: Aprax Consulting Ph(M): +91-9873500678 URL: www.apraxindia.com Email: hr@apraxindia.com Your 1st sentence is grammatically incorrect and doesn't make any sense. One question: Isn't your moral values endeavor compromised by selling dumps? ...

tcpip.sys IOCTL codes doc
Hello, Where I can find IOCTL codes ( not just info queries like in SDK example) and examples of their use for devices created by 'tcpip.sys' : 'tcp', 'ip, 'udp' 'rawIp' etc. ( and by 'ndis' if the info is close by) for the use by DeviceIoControl from user-mode app, so I can skip Winsock alltogether. ( I already looked at tdi*.h DDK headers and wshsmple.c example, need more) Is it considered as classified information by MS? ...

Web resources about - TCPIP startup on the iSeries - comp.sys.ibm.as400.misc

Invest in Startups
Invest in Startups

PR Tips For Startups - Public Relations Advice and Innovative Marketing Strategies From Today's Small ...
Innovative marketing strategies from today's small business leaders After a friend of mine left the startup he cofounded, he took a job as a ...

Lean Startup - Wikipedia, the free encyclopedia
Ries describes There Inc. as a classic example of a Silicon Valley startup with five years of stealth R&D , $40 million in financing, and nearly ...

The Industry - Covering Design Focused Startups & People
The Industry brings a new voice to tech media. Highlighting design focused startups and people, we exist to give the design community a voice ...

Washboard: New Startup Sells $10 Rolls of Quarters for $15 Each
If today being National Martini Day hasn’t driven you to pour a stiff drink yet, this will. Jiminy. ( Via Chris Ziegler .

Facebook Participates In StartUp America Initiative
Facebook has joined Intel, IBM and Hewlett-Packard in a White House-led initiative to promote startups and hopefully boost economic growth as ...

FbStart distributes $100 million in benefits to more than 3,800 startups in the first year
... a global community of mobile developers. In the first year, FbStart distributed benefits worth more than $100 million to more than 3,800 startups, ...

Facebook Picks Up Much of Dogpatch Labs Startup Recrec’s Team
In another not-quite-a-talent-acquisition, most of the founding team of Dogpatch Labs-incubated startup Recrec is going to Facebook. Two of ...

INNOVATION INSIGHTS: How this Australian startup is trying to solve a problem for millions every day ...
If you’ve ever found yourself desperately trying to find city parking, you’re not alone. The problem of sourcing parking, especially in central ...

Swedish Startup Brings In-App Purchases To VR Gaming
... we start to see more hardware, but at this point there is still very little content," Tommy Palm, founder of Resolution Games, told ArcticStartup ...

Resources last updated: 3/24/2016 2:24:53 PM