Request from Outside ... - comp.sys.ibm.ps2.hardware

Hi ! I know there are a lot collectors, probably for this request as well ? Thema: MCA documentation Datum: 06.06.2010 17:05:46 Westeurop�ische Sommerzeit Von: bogdan.barbu@ymail.com Hi. I'm not sure where to turn to. I noticed you've uploaded documentation regarding MCA on your website. Would it be possible for you to somehow aquire an update, namely "Update for the IBM Personal System/2 Hardware Technical Reference" (S10G-6466). I have tried looking around but with little luck. Perhaps you know the right people. Cheers, Bogdan -- Very friendly greetings from Peter in Germany http://www.mcamafia.de/mcapage0/mcaindex.htm *** Reply to: peterwendt@mcamafia.de only ! ***

On 6/9/2010 14:05, Peter H. Wendt wrote: > Hi ! > > I know there are a lot collectors, probably for this request as well ? > > Thema: MCA documentation > Datum: 06.06.2010 17:05:46 Westeurop�ische Sommerzeit > Von: bogdan.barbu@ymail.com > > Hi. > > I'm not sure where to turn to. I noticed you've uploaded documentation > regarding MCA on your website. Would it be possible for you to somehow > aquire an update, namely "Update for the IBM Personal System/2 Hardware > Technical Reference" (S10G-6466). I have tried looking around but with > little luck. Perhaps you know the right people. > > Cheers, > Bogdan Uh, no dice here. What in particular? At least we can commiserate...

On Wed, 09 Jun 2010 16:34:12 -0500, Louis Ohland <ohland@charter.net> wrote: >On 6/9/2010 14:05, Peter H. Wendt wrote: >> Hi ! >> >> I know there are a lot collectors, probably for this request as well ? >> >> Thema: MCA documentation >> Datum: 06.06.2010 17:05:46 Westeurop�ische Sommerzeit >> Von: bogdan.barbu@ymail.com >> >> Hi. >> >> I'm not sure where to turn to. I noticed you've uploaded documentation >> regarding MCA on your website. Would it be possible for you to somehow >> aquire an update, namely "Update for the IBM Personal System/2 Hardware >> Technical Reference" (S10G-6466). I have tried looking around but with >> little luck. Perhaps you know the right people. >> >> Cheers, >> Bogdan > > >Uh, no dice here. What in particular? At least we can commiserate... I sent a P/S2 Tech Ref to someone here. WW maybe? I am not sure what revision it was tho.

<gfretwell@aol.com> wrote in message news:h8a016tl03g91beqlabgcecm350o19e0fr@4ax.com... > On Wed, 09 Jun 2010 16:34:12 -0500, Louis Ohland <ohland@charter.net> > wrote: > > >On 6/9/2010 14:05, Peter H. Wendt wrote: > >> Hi ! > >> > >> I know there are a lot collectors, probably for this request as well ? > >> > >> Thema: MCA documentation > >> Datum: 06.06.2010 17:05:46 Westeurop�ische Sommerzeit > >> Von: bogdan.barbu@ymail.com > >> > >> Hi. > >> > >> I'm not sure where to turn to. I noticed you've uploaded documentation > >> regarding MCA on your website. Would it be possible for you to somehow > >> aquire an update, namely "Update for the IBM Personal System/2 Hardware > >> Technical Reference" (S10G-6466). I have tried looking around but with > >> little luck. Perhaps you know the right people. > >> > >> Cheers, > >> Bogdan > > > > > >Uh, no dice here. What in particular? At least we can commiserate... > > I sent a P/S2 Tech Ref to someone here. WW maybe? > I am not sure what revision it was tho. I have the original HITR an BITR, with some TNL updates, and extra system-specific addenda, but the S10G-stuff was a completely restructured set and I didn't see the need, myself, sorry. -- Cheers, Tim Clarke (a.k.a. WBST) Guildford, U.K.

Hi Tim ! >>> Uh, no dice here. What in particular? At least we can commiserate... >> I sent a P/S2 Tech Ref to someone here. WW maybe? >> I am not sure what revision it was tho. > > I have the original HITR an BITR, with some TNL updates, and extra > system-specific addenda, but the S10G-stuff was a completely restructured > set and I didn't see the need, myself, sorry. That's what I have in the PDFs as well: the HITR plus some addendums. So are the system-specifics - updated once parts were issued and sent out by IBM. That's what I scanned later. -- Very friendly greetings from Peter in Germany http://www.mcamafia.de/mcapage0/mcaindex.htm *** Reply to: peterwendt@mcamafia.de only ! ***

Hi Peter... "Peter H. Wendt" <peterwendt@mcamafia.de> wrote in message news:k9idne2Qz5-EF43RnZ2dnUVZ_jmdnZ2d@westnet.com.au... > Hi Tim ! > >> I have the original HITR an BITR, with some TNL updates, and extra >> system-specific addenda, but the S10G-stuff was a completely restructured >> set and I didn't see the need, myself, sorry. > > That's what I have in the PDFs as well: the HITR plus some addendums. > So are the system-specifics - updated once parts were issued and sent out > by IBM. That's what I scanned later. What can one use to convert scanned pages to PDF form, Peter? I should, at least, scan my paper system-specific addenda and make those available. It's not something that I've bothered to research, previously. -- Cheers, Tim Clarke(a.k.a. WBST) Guildford, U.K.

Hi Tim ! >> That's what I have in the PDFs as well: the HITR plus some addendums. >> So are the system-specifics - updated once parts were issued and sent >> out by IBM. That's what I scanned later. > > What can one use to convert scanned pages to PDF form, Peter? I should, > at least, scan my paper system-specific addenda and make those > available. It's not something that I've bothered to research, previously. A) I use my Canon LIDE20 scanner, which scans directly to PDF. Many but not all scanners have this function. My Epson Multifunction unit hasn't. It is a licensing issue as far as I know. B) I use PDFprint (or suchlike) installed as a printer and feed the scanned graphics into e.g. a WinWord / WordPro / Writer file and print it into PDF. (Did a similar method back then for the manuals but using Adobe Acrobat Exchange. Had a very old version which will not run on WXP. Ran under W3.1x and W9x.) C) Use OpenOffice Write "Export to PDF" function, but you need to create a document with the scanned pages as well. -- Very friendly greetings from Peter in Germany http://www.mcamafia.de/mcapage0/mcaindex.htm *** Reply to: peterwendt@mcamafia.de only ! ***

Hi Peter... "Peter H. Wendt" <peterwendt@mcamafia.de> wrote in message news:9N6dnQB7GNBGgYzRnZ2dnUVZ_oGdnZ2d@westnet.com.au... > Hi Tim ! > >>> That's what I have in the PDFs as well: the HITR plus some addendums. >>> So are the system-specifics - updated once parts were issued and sent >>> out by IBM. That's what I scanned later. >> >> What can one use to convert scanned pages to PDF form, Peter? I should, >> at least, scan my paper system-specific addenda and make those available. >> It's not something that I've bothered to research, previously. > > A) I use my Canon LIDE20 scanner, which scans directly to PDF. Many but > not all scanners have this function. My Epson Multifunction unit hasn't. > It is a licensing issue as far as I know. > > B) I use PDFprint (or suchlike) installed as a printer and feed the > scanned graphics into e.g. a WinWord / WordPro / Writer file and print it > into PDF. > > (Did a similar method back then for the manuals but using Adobe Acrobat > Exchange. Had a very old version which will not run on WXP. Ran under > W3.1x and W9x.) > > C) Use OpenOffice Write "Export to PDF" function, but you need to create a > document with the scanned pages as well. That's great thanks. Saved my a lot of time researching. I've installed OpenOffice, but not used it yet. So that looks a likely option. Give my best to Anke. -- Regards, Tim Clarke(a.k.a. WBST) Guildford, U.K.

Hi Tim ! >> A) I use my Canon LIDE20 scanner, which scans directly to PDF. Many >> but not all scanners have this function. My Epson Multifunction unit >> hasn't. It is a licensing issue as far as I know. >> >> B) I use PDFprint (or suchlike) installed as a printer and feed the >> scanned graphics into e.g. a WinWord / WordPro / Writer file and print >> it into PDF. >> >> (Did a similar method back then for the manuals but using Adobe >> Acrobat Exchange. Had a very old version which will not run on WXP. >> Ran under W3.1x and W9x.) >> >> C) Use OpenOffice Write "Export to PDF" function, but you need to >> create a document with the scanned pages as well. > > That's great thanks. Saved my a lot of time researching. I've installed > OpenOffice, but not used it yet. So that looks a likely option. Don't forget to set the page borders to 0.00 before you paste in the "per-page-scan"-graphic ... ;-) > Give my best to Anke. Will do. Thanks. Time to go to bed anyway. It was a stressy day today with a lot time on the road (and in jams). Tomorrow will be another road rage again. Sigh. -- Very friendly greetings from Peter in Germany http://www.mcamafia.de/mcapage0/mcaindex.htm *** Reply to: peterwendt@mcamafia.de only ! ***

Peter H. Wendt wrote: > B) I use PDFprint (or suchlike) installed as a printer and feed the > scanned graphics into e.g. a WinWord / WordPro / Writer file and print > it into PDF. I use CutePDF and Bullzip, both work well. It's how I save web pages for future reference these days. -Jim

Hi, guys. It's me who asked about the S10G-6466 update. I didn't know about this group until Peter mentioned it in an e-mail. He also mentioned that this document might be available at a library in Australia -- would anyone know more about that? Cheers, Bogdan

love4boobies@yahoo.com wrote: > Hi, guys. > > It's me who asked about the S10G-6466 update. I didn't know about this > group until Peter mentioned it in an e-mail. He also mentioned that > this document might be available at a library in Australia -- would > anyone know more about that? > > Cheers, > Bogdan http://ps-2.kev009.com:8081/basil.holloway/

On 14 iun., 19:24, Louis Ohland <ohl...@charter.net> wrote: > love4boob...@yahoo.com wrote: > > Hi, guys. > > > It's me who asked about the S10G-6466 update. I didn't know about this > > group until Peter mentioned it in an e-mail. He also mentioned that > > this document might be available at a library in Australia -- would > > anyone know more about that? > > > Cheers, > > Bogdan > > http://ps-2.kev009.com:8081/basil.holloway/ I'm afraid that the document is not in that collection, I have already looked. :-( Cheers, Bogdan

Similiar Articles:

Request from Outside ... - comp.sys.ibm.ps2.hardware
Hi ! I know there are a lot collectors, probably for this request as well ? Thema: MCA documentation Datum: 06.06.2010 17:05:46 Westeurop ische...

JSON objects sent as a http request - comp.lang.java.help ...
valheru@chariot.net.au wrote: > boolean myfunction(JSONObject myobject) > > and I want to call it from an outside test using Html, how do I do > this?

Ping a untrust interface at cisco asa 5505 - comp.dcom.sys.cisco ...
Hi all, what must i set in the ASDM when i will ping a outside interface? ... sys.cisco ... block webpages with a ASA 5505 - comp.dcom.sys.cisco Request from Outside ...

IBM ps/2 Technical Reference Manual - comp.lang.asm.x86
Request from Outside ... - comp.sys.ibm.ps2.hardware IBM ps/2 Technical Reference Manual - comp.lang.asm.x86 Request from Outside ... - comp.sys.ibm.ps2.hardware IBM ps/2 ...

Configuring ACS 4.2 to delegate authentication request 2 radius ...
The question is: How do we configure the ACS 4.2 to delegate the Authentication Request to another Radius server. I need an urgent response.... and would appreciate ...

Operation not permitted when trying to contact time server - comp ...
To disallow NTP requests from outside of the subnet while still allowing an NTP connection to a higher stratum server outside the subnet. (I know now that you can do ...

json functions - comp.lang.xharbour
Request from Outside ... - comp.sys.ibm.ps2.hardware C) Use OpenOffice Write "Export to PDF" function, but you need to create a document ... JSON objects sent as a http ...

How to unblock IPMI port (upd/623) on Solaris 10? - comp.unix ...
ipmitool works OK on the Solaris box but attempts from the outside see: 00:29:20.7 ... 192.168.0.4 IPMI Get Channel Auth Capabilities, Application Request 00 ...

Virtual IP setup Problem - comp.os.linux.networking
On the other way around from the outside network -> B, B->C and C->D. Lets I ping a ... This problem is almost killing my multiple node issue. I kindly request for help.

HP NonStop web site unavailable? - comp.sys.tandem
I have sent > a request to HP Webmaster and > they told me it should me working? > Yves Works just fine for me, even from outside the HP network.

Outdoor temperature sensor for Carrier EMi Thermostat - comp.home ...
... honeywell.com/request.cfm?form=50-8436 Don Wiss wrote: > > I had my utility install a Carrier EMi Thermostat. But they don't give out > the outdoor ... give out the outdoor ...

IP Camera Interfacing - comp.soft-sys.matlab
If you can find a way to obtain them from outside a web browser, such as through a basic HTTP request as Dave mentioned then you should be able to obtain the images ...

Redirect DNS on 3640 - comp.dcom.sys.cisco
Redirect DNS on 3640 - comp.dcom.sys.cisco Is it possible on Cisco 3640 to redirect all DNS requests to ... On PIX this is known as "outside NAT" (these days) or ...

Pix ASA hide ports for portscan? - comp.dcom.sys.cisco
... anymore from the outside This is due > to the nature of tcp and not related to any special firewall. > I fully agree with you. something needs to respond to requests ...

ping using multiple interfaces - comp.unix.solaris
A little C program I hacked together to open sockets, bind them to each source address and send a ping request from each to a known destination also sends everything over ...

Outlook: Exchanging Meeting Requests with People Outside Your Company
Can I exchange meeting requests with people who work at another company and who might not use Outlook? I see a When sending meeting requests over the Internet, use ...

Outside Activities - National Institute of Environmental Health ...
Original Request: HHS-520 Request for Approval of Outside Activity (1/06) Submit your request as soon as possible, but no later than 8 weeks prior to the proposed start ...

7/24/2012 12:12:35 PM