f



hyperref Warning: Token not allowed in a PDFDocEncoded string

Hi All,

Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
trying it out. There were some packages I added locally, but hyperref
was not one of them. Now I'm getting the error that is the subject of
this message. I'm including the log file for reference.

Normally I would have just concluded that I'd need to remove the math
in the section names, but I know something's amiss since this compiles
just fine on the PC using MiKTeX. 

Any clues would be appreciated.

--Randy




This is e-TeXk, Version 3.141592-2.1 (Web2C 7.5.2) (format=latex 2004.6.3)  8 JUN 2004 11:48
entering extended mode
 %&-line parsing enabled.
 (/prod/depot/_SunOS_5.8/tex/texmf/web2c/cp8bit.tcx)
**design
(./design.tex
LaTeX2e <2001/06/01>
Babel <v3.7j> and hyphenation patterns for english, dumylang, nohyphenation, ba
sque, czech, slovak, german, ngerman, spanish, catalan, french, ukenglish, ital
ian, dutch, polish, portuguese, loaded.
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/base/article.cls
Document Class: article 2001/04/21 v1.4e Standard LaTeX document class
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/base/size10.clo
File: size10.clo 2001/04/21 v1.4e Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
(/home/unix/us057845/texmf/tex/latex/semc/semdoc.sty
Package: semdoc 2004/01/01

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/psnfss/helvet.sty
Package: helvet 2002/09/08 PSNFSS-v9.0a (WaS) 

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/keyval.sty
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
))
(/home/unix/us057845/texmf/tex/latex/lastpage/lastpage.sty
Package: lastpage 1994/06/25 v0.1b LaTeX2e package for refs to last page number
 (JPG)
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/graphicx.sty
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/graphics.sty
Package: graphics 2001/07/07 v1.0n Standard LaTeX Graphics (DPC,SPQR)

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/trig.sty
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/texlive/graphics.cfg
File: graphics.cfg 2001/08/31 v1.1 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: dvips.def on input line 80.

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/dvips.def
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
))
\Gin@req@height=\dimen103
\Gin@req@width=\dimen104
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/fancyhdr/fancyhdr.sty
\headwidth=\dimen105
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/tools/array.sty
Package: array 1998/05/13 v2.3m Tabular extension package (FMi)
\col@sep=\dimen106
\extrarowheight=\dimen107
\NC@list=\toks15
\extratabsurround=\skip43
\backup@length=\skip44
)
\docwd@logo=\skip45
\docwd@typeandtitle=\skip46
\docwd@page=\skip47
\docwd@author=\skip48
\docwd@no=\skip49
\docwd@approved=\skip50
\docwd@checked=\skip51
\docwd@date=\skip52
\docwd@rev=\skip53
\docwd@file=\skip54
\doc@length=\skip55
)
(/home/unix/us057845/texmf/tex/latex/titlesec/titlesec.sty
Package: titlesec 2002/04/07 v2.5 Sectioning titles
\ttl@box=\box26
\beforetitleunit=\skip56
\aftertitleunit=\skip57
\ttl@plus=\dimen108
\ttl@minus=\dimen109
\titlewidth=\dimen110
\titlewidthlast=\dimen111
\titlewidthfirst=\dimen112
)
(/home/unix/us057845/texmf/tex/latex/subfigure/subfigure.sty
Package: subfigure 2002/07/30 v2.1.4 subfigure package
\subfigtopskip=\skip58
\subfigcapskip=\skip59
\subfigcaptopadj=\dimen113
\subfigbottomskip=\skip60
\subfigcapmargin=\dimen114
\subfiglabelskip=\skip61
\c@subfigure=\count87
\c@lofdepth=\count88
\c@subtable=\count89
\c@lotdepth=\count90

****************************************
* Local config file subfigure.cfg used *
****************************************
(/home/unix/us057845/texmf/tex/latex/subfigure/subfigure.cfg)
\subfig@top=\skip62
\subfig@bottom=\skip63
)
(/home/unix/us057845/texmf/tex/latex/ccaption/ccaption.sty
Package: ccaption 2002/10/18 v3.1b Extended captioning and new floats
\@contcwidth=\skip64
\@contindw=\skip65
\abovelegendskip=\skip66
\belowlegendskip=\skip67
\c@newflo@tctr=\count91
)
(/home/unix/us057845/texmf/tex/latex/semc/archive.sty
Package: archive 
\@outarchive=\write3
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/amsfonts/amsfonts.sty
Package: amsfonts 2001/10/25 v2.2f
\@emptytoks=\toks16
\symAMSa=\mathgroup4
\symAMSb=\mathgroup5
LaTeX Font Info:    Overwriting math alphabet `\mathfrak' in version `bold'
(Font)                  U/euf/m/n --> U/euf/b/n on input line 132.
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/tools/verbatim.sty
Package: verbatim 2001/03/12 v1.5p LaTeX2e package for verbatim enhancements
\every@verbatim=\toks17
\verbatim@line=\toks18
\verbatim@in@stream=\read1
)
(/home/unix/us057845/texmf/tex/latex/semc/footmisc.sty
Package: footmisc 2004/01/23 v5.3a a miscellany of footnote facilities
\FN@temptoken=\toks19
\footnotemargin=\dimen115
\c@pp@next@reset=\count92
Package footmisc Info: Declaring symbol style bringhurst on input line 766.
Package footmisc Info: Declaring symbol style chicago on input line 767.
Package footmisc Info: Declaring symbol style wiley on input line 768.
Package footmisc Info: Declaring symbol style lamport-robust on input line 772.

Package footmisc Info: Declaring symbol style lamport* on input line 780.
Package footmisc Info: Declaring symbol style lamport*-robust on input line 789
..
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/hyperref.sty
Package: hyperref 2003/09/15 v6.74i Hypertext links for LaTeX
\@linkdim=\dimen116
\Hy@linkcounter=\count93
\Hy@pagecounter=\count94

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/pd1enc.def
File: pd1enc.def 2003/09/15 v6.74i Hyperref: PDFDocEncoding definition (HO)
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/texlive/hyperref.cfg
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
Package hyperref Info: Hyper figures OFF on input line 1879.
Package hyperref Info: Link nesting OFF on input line 1884.
Package hyperref Info: Hyper index ON on input line 1887.
Package hyperref Info: Plain pages ON on input line 1892.
Package hyperref Info: Backreferencing OFF on input line 1899.

Implicit mode ON; LaTeX internals redefined
Package hyperref Info: Bookmarks ON on input line 2003.
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/ltxmisc/url.sty
\Urlmuskip=\muskip10
Package: url 1999/03/28  ver 1.5x  Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 2142.
\Fld@menulength=\count95
\Field@Width=\dimen117
\Fld@charsize=\dimen118
\Choice@toks=\toks20
\Field@toks=\toks21
Package hyperref Info: Hyper figures OFF on input line 2617.
Package hyperref Info: Link nesting OFF on input line 2622.
Package hyperref Info: Hyper index ON on input line 2625.
Package hyperref Info: backreferencing OFF on input line 2632.
Package hyperref Info: Link coloring OFF on input line 2637.
\c@Item=\count96
\c@Hfootnote=\count97
)
*hyperref using default driver hdvips*
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/hdvips.def
File: hdvips.def 2003/09/15 v6.74i Hyperref driver for dvips

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/pdfmark.def
File: pdfmark.def 2003/09/15 v6.74i Hyperref definitions for pdfmark specials
\pdf@docset=\toks22
\pdf@box=\box27
\pdf@toks=\toks23
\pdf@defaulttoks=\toks24
\Fld@listcount=\count98
\@outlinefile=\write4
))
\c@definition=\count99

(./design.aux)
\openout1 = `design.aux'.

LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 37.
LaTeX Font Info:    ... okay on input line 37.
Package hyperref Info: Link coloring OFF on input line 37.
 (/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/nameref.sty
Package: nameref 2001/01/27 v2.19 Cross-referencing by name of section
\c@section@level=\count100
)
LaTeX Info: Redefining \ref on input line 37.
LaTeX Info: Redefining \pageref on input line 37.
 (./design.out) (./design.out)
\openout4 = `design.out'.

 12.0pt plus 2.0pt minus 2.0pt\ is floatsep
20.0pt plus 2.0pt minus 4.0pt\ is textfloatsep 10.0pt\ is abovecaptionskip
0.0pt\ is belowcaptionskip 10.0pt plus 2.0pt minus 5.0pt\ is abovedisplayskip
10.0pt plus 2.0pt minus 5.0pt\ is belowdisplayskip
8.0pt plus 2.0pt minus 4.0pt\ is topsep
4.0pt plus 2.0pt minus 1.0pt\ is itemsep
2.0pt plus 1.0pt minus 1.0pt\ is partopsep
LaTeX Font Info:    Try loading font information for U+msa on input line 56.

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/amsfonts/umsa.fd
File: umsa.fd 2002/01/19 v2.2g AMS font definitions
)
LaTeX Font Info:    Try loading font information for U+msb on input line 56.

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/amsfonts/umsb.fd
File: umsb.fd 2002/01/19 v2.2g AMS font definitions
)
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
LaTeX Font Info:    Try loading font information for OT1+phv on input line 57.

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/psnfss/ot1phv.fd
File: ot1phv.fd 2001/06/04 scalable font definitions for OT1/phv.
) [1

] (./design.toc
File: semvector.eps Graphic file (type eps)
<semvector.eps> [2])
\tf@toc=\write5
\openout5 = `design.toc'.

 (./design.lof
Overfull \hbox (1.57594pt too wide) in paragraph at lines 14--14
 [][] [] []  
 []

File: semvector.eps Graphic file (type eps)
<semvector.eps> [3])
\tf@lof=\write6
\openout6 = `design.lof'.

 (./design.lot)
\tf@lot=\write7
\openout7 = `design.lot'.

File: semvector.eps Graphic file (type eps)
 <semvector.eps> [4]
\borderrulewidth=\skip68
\libraryapiwidth=\skip69
\fattablelinesize=\skip70
\skinnytablelinesize=\skip71
File: smfokiblock.eps Graphic file (type eps)
 <smfokiblock.eps>
File: semvector.eps Graphic file (type eps)

<semvector.eps> [5]
File: smfannadablock.eps Graphic file (type eps)
 <smfannadablock.eps>
File: smfannablock.eps Graphic file (type eps)
 <smfannablock.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
[6]
File: rladder.eps Graphic file (type eps)
 <rladder.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [7]
File: transferfunction.eps Graphic file (type eps)
 <transferfunction.eps>
File: quantizer.eps Graphic file (type eps)
 <quantizer.eps>
File: semvector.eps Graphic file (type eps)

<semvector.eps> [8]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [9]
File: osspectrum.eps Graphic file (type eps)
 <osspectrum.eps>
File: interpolator.eps Graphic file (type eps)
 <interpolator.eps>
File: osfiltering.eps Graphic file (type eps)

<osfiltering.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [10]
File: typicalnsspectrum.eps Graphic file (type eps)
 <typicalnsspectrum.eps>
File: dsmodint.eps Graphic file (type eps)
 <dsmodint.eps>
File: semvector.eps Graphic file (type eps)

<semvector.eps> [11]
File: ntfmag.eps Graphic file (type eps)
 <ntfmag.eps>
File: dsmodtwoint.eps Graphic file (type eps)
 <dsmodtwoint.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [12]
File: modtable.eps Graphic file (type eps)

<modtable.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [13]
File: nsblock.eps Graphic file (type eps)
 <nsblock.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [14]
File: birdie.eps Graphic file (type eps)

<birdie.eps>
File: birdiepsd.eps Graphic file (type eps)
 <birdiepsd.eps>
File: dqcanonical.eps Graphic file (type eps)
 <dqcanonical.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [15]
File: dq.eps Graphic file (type eps)
 <dq.eps>
File: ds.eps Graphic file (type eps)

<ds.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [16]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [17]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [18]
File: twointtf.eps Graphic file (type eps)

<twointtf.eps>
File: pazeros.eps Graphic file (type eps)
 <pazeros.eps>
File: pantf.eps Graphic file (type eps)
 <pantf.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [19]
File: fweight.eps Graphic file (type eps)
 <fweight.eps>
File: semvector.eps Graphic file (type eps)

<semvector.eps> [20]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [21]
File: bitstuff.eps Graphic file (type eps)
 <bitstuff.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
[22]
File: main.eps Graphic file (type eps)
 <main.eps>
File: deltasigmainit.eps Graphic file (type eps)
 <deltasigmainit.eps>
File: deltasigmaconvert.eps Graphic file (type eps)
 <deltasigmaconvert.eps>
File: deltasigmaconclude.eps Graphic file (type eps)

<deltasigmaconclude.eps>
LaTeX Font Info:    Font shape `OT1/cmtt/bx/n' in size <10> not available
(Font)              Font shape `OT1/cmtt/m/n' tried instead on input line 1150.

LaTeX Font Info:    Font shape `OT1/cmtt/bx/n' in size <7> not available
(Font)              Font shape `OT1/cmtt/m/n' tried instead on input line 1150.

File: semvector.eps Graphic file (type eps)
 <semvector.eps> [23]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [24]
File: semvector.eps Graphic file (type eps)

<semvector.eps> [25]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [26]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [27]
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
[28]

Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1262.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `subscript' on input line 1262.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1262.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1275.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `subscript' on input line 1275.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1275.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1288.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `subscript' on input line 1288.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 1288.

File: semvector.eps Graphic file (type eps)
<semvector.eps> [29]
File: buffering.eps Graphic file (type eps)
 <buffering.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [30]
File: dscoeffimpulse.eps Graphic file (type eps)
 <dscoeffimpulse.eps>
File: dscoefftotal.eps Graphic file (type eps)

<dscoefftotal.eps>
File: dscoeffcutoff.eps Graphic file (type eps)
 <dscoeffcutoff.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [31]
File: fsunitstep.eps Graphic file (type eps)
 <fsunitstep.eps>
File: fsunitstepout.eps Graphic file (type eps)

<fsunitstepout.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [32]
File: clipping.eps Graphic file (type eps)
 <clipping.eps>
File: clippingfreq.eps Graphic file (type eps)
 <clippingfreq.eps>
File: digitalclippingfreq.eps Graphic file (type eps)

<digitalclippingfreq.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [33]
File: fsdistort.eps Graphic file (type eps)
 <fsdistort.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
[34]
File: fsundistort.eps Graphic file (type eps)
 <fsundistort.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [35]

LaTeX Warning: Text page 36 contains only floats.

File: semvector.eps Graphic file (type eps)
<semvector.eps> [36]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [37]
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [38]
File: semvector.eps Graphic file (type eps)
 <semvector.eps>
[39] (./design.bbl
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [40])
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [41]
File: iitfreq.eps Graphic file (type eps)
 <iitfreq.eps>
File: signalfreq.eps Graphic file (type eps)

<signalfreq.eps>
File: sampledfreq.eps Graphic file (type eps)
 <sampledfreq.eps>
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [42]
AED: lastpage setting LastPage
File: semvector.eps Graphic file (type eps)
 <semvector.eps> [43] (./design.aux)
\openout3 = `design.archive'.

 ) 
Here is how much of TeX's memory you used:
 3513 strings out of 95536
 48453 string characters out of 1191618
 123242 words of memory out of 1562325
 6443 multiletter control sequences out of 10000+50000
 15542 words of font info for 57 fonts, out of 1000000 for 2000
 117 hyphenation exceptions out of 1000
 35i,21n,45p,617b,571s stack positions out of 5000i,500n,6000p,200000b,40000s

Output written on design.dvi (43 pages, 299600 bytes).

-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/8/2004 4:01:27 PM
comp.text.tex 39029 articles. 3 followers. Post Follow

13 Replies
4573 Views

Similar Articles

[PageSpeed] 16

Randy Yates <randy.yates@sonyericsson.com> writes:

> Hi All,
> 
> Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
> trying it out. There were some packages I added locally, but hyperref
> was not one of them. Now I'm getting the error that is the subject of
> this message. I'm including the log file for reference.
> 
> Normally I would have just concluded that I'd need to remove the math
> in the section names, but I know something's amiss since this compiles
> just fine on the PC using MiKTeX. 
> 
> Any clues would be appreciated.
> 
> --Randy

PS: This is using LaTeX/dvipdf - NOT pdfLaTeX.
-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/8/2004 7:09:29 PM
Randy Yates <randy.yates@sonyericsson.com>  schrieb:

> Hi All,
> 
> Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
> trying it out. There were some packages I added locally, but hyperref
> was not one of them. Now I'm getting the error that is the subject of
> this message. I'm including the log file for reference.
> 

Wow. Do you really think we love it to dig into long log-files? Make a 
minimal example first and sent this along with its log-file. Or search 
at groups.google.com for your error. 136 hit should be to difficult to 
scan.

-- 
Ulrike Fischer
e-mail: zus�tzlich meinen Vornamen vor dem @ einf�gen.
e-mail: add my first name between the news and the @.
0
news9686 (1970)
6/9/2004 7:47:27 AM
Ulrike Fischer <news@nililand.de> writes:

> Randy Yates <randy.yates@sonyericsson.com>  schrieb:
>
>> Hi All,
>> 
>> Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
>> trying it out. There were some packages I added locally, but hyperref
>> was not one of them. Now I'm getting the error that is the subject of
>> this message. I'm including the log file for reference.
>> 
>
> Wow. Do you really think we love it to dig into long log-files? 

Do you really think someone can predict the likes and dislikes of
every individual in a usenet newsgroup? The information is there. If
you don't have the desire to read it, then don't. 

> Make a 
> minimal example first and sent this along with its log-file. Or search 
> at groups.google.com for your error. 136 hit should be to difficult to 
> scan.

I *DID* search Google groups first. That's why I'm here. 
-- 
%  Randy Yates                  % "Ticket to the moon, flight leaves here today 
%% Fuquay-Varina, NC            %  from Satellite 2"
%%% 919-577-9882                % 'Ticket To The Moon' 
%%%% <yates@ieee.org>           % *Time*, Electric Light Orchestra
http://home.earthlink.net/~yatescr
0
yates (3949)
6/9/2004 10:47:23 AM
On Wed, 09 Jun 2004 10:47:23 GMT, Randy Yates <yates@ieee.org> wrote:

> Ulrike Fischer <news@nililand.de> writes:
>
>>
>> Wow. Do you really think we love it to dig into long log-files?
>
> Do you really think someone can predict the likes and dislikes of
> every individual in a usenet newsgroup? The information is there. If
> you don't have the desire to read it, then don't.

Randy, you've been on this newsgroup long enough to know that most people  
prefer a minimal example. A 500+ line log-file is rarely seen on this  
newsgroup.

\documentclass{article}
\usepackage{hyperref}
\begin{document}
   \section{Some math $x_2$}
\end{document}

This gives the exact same warnings as you were experiencing.

>> Make a
>> minimal example first and sent this along with its log-file. Or search
>> at groups.google.com for your error. 136 hit should be to difficult to
>> scan.
>
> I *DID* search Google groups first. That's why I'm here.

I'm somewhat surprised you didn't find what you were looking for.  
Searching Google Groups for the title of this thread gives plenty of hits  
on the first page, where Heiko Oberdiek more or less says: Look in the  
documentation for \texorpdfstring.
-- 
Morten H�gholm
I haven't got a smelly address.
UK-TUG FAQ: <URL:http://www.tex.ac.uk/cgi-bin/texfaq2html>
0
moho01ab5415 (738)
6/9/2004 11:40:14 AM
Randy Yates wrote:
> Ulrike Fischer <news@nililand.de> writes:
>>Randy Yates <randy.yates@sonyericsson.com>  schrieb:
>>>Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
>>>trying it out. There were some packages I added locally, but hyperref
>>>was not one of them. Now I'm getting the error that is the subject of
>>>this message. I'm including the log file for reference.
> The information is there. If
> you don't have the desire to read it, then don't. 

The information is already there in the subject line. You (your
hyperref) tries to use charaters in pdf constructs, that are
not defined/allowed in the PDFDocEncoding, f.e. you use symbols
in /chapter and hyperref tries to build the document catalog
entries.

Try to track down where the Warning is raised and check the
encodings for the text and the hyperred entry.

Wishing a happy day
		LOBI
0
6/9/2004 12:08:52 PM
=?iso-8859-15?Q?Morten_H=F8gholm?= <moho01ab@smelly.student.cbs.dk> writes:

> On Wed, 09 Jun 2004 10:47:23 GMT, Randy Yates <yates@ieee.org> wrote:
> 
> > Ulrike Fischer <news@nililand.de> writes:
> >
> >>
> >> Wow. Do you really think we love it to dig into long log-files?
> >
> > Do you really think someone can predict the likes and dislikes of
> > every individual in a usenet newsgroup? The information is there. If
> > you don't have the desire to read it, then don't.
> 
> Randy, you've been on this newsgroup long enough to know that most
> people  prefer a minimal example. A 500+ line log-file is rarely seen
> on this  newsgroup.
> 
> 
> \documentclass{article}
> \usepackage{hyperref}
> \begin{document}
>    \section{Some math $x_2$}
> \end{document}
> 
> This gives the exact same warnings as you were experiencing.

I trust that it does. I guess I don't see what's such a big problem in typing
"M-% PDFDocEncoded" (e.g., in xemacs) to jump to the relevent spot(s) almost
instantly in xemacs. I don't mean to be obstinate, but really: is this such
a big problem?

> >> Make a
> >> minimal example first and sent this along with its log-file. Or search
> >> at groups.google.com for your error. 136 hit should be to difficult to
> >> scan.
> >
> > I *DID* search Google groups first. That's why I'm here.
> 
> I'm somewhat surprised you didn't find what you were looking for.
> Searching Google Groups for the title of this thread gives plenty of
> hits  on the first page, where Heiko Oberdiek more or less says: Look
> in the  documentation for \texorpdfstring.

Well Morten I guess you didn't read my post thoroughly enough. The
exact same document compiles just fine with MiKTex on a PC. Therefore
this CANNOT be a TeX source code problem. That is, I should be able
to use math mode in section headings at this day and time. The post by
Heiko to which you are referring is some 4 years old. 

I suspect that this bug/shortcoming in the hyperref package has since
been overcome and therefore that this is a configuration problem. I
was hoping someone would come out and say something like, "Oh yes, the
hyperref package in the TeXLive 2003 distribution is old/buggy - you
need to replace it with the latest version."
-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/9/2004 1:51:18 PM
Randy Yates <randy.yates@sonyericsson.com> writes:

> =?iso-8859-15?Q?Morten_H=F8gholm?= <moho01ab@smelly.student.cbs.dk> writes:
> 
> > On Wed, 09 Jun 2004 10:47:23 GMT, Randy Yates <yates@ieee.org> wrote:
> > 
> > > Ulrike Fischer <news@nililand.de> writes:
> > >
> > >>
> > >> Wow. Do you really think we love it to dig into long log-files?
> > >
> > > Do you really think someone can predict the likes and dislikes of
> > > every individual in a usenet newsgroup? The information is there. If
> > > you don't have the desire to read it, then don't.
> > 
> > Randy, you've been on this newsgroup long enough to know that most
> > people  prefer a minimal example. A 500+ line log-file is rarely seen
> > on this  newsgroup.
> > 
> > 
> > \documentclass{article}
> > \usepackage{hyperref}
> > \begin{document}
> >    \section{Some math $x_2$}
> > \end{document}
> > 
> > This gives the exact same warnings as you were experiencing.
> 
> I trust that it does. I guess I don't see what's such a big problem in typing
> "M-% PDFDocEncoded" (e.g., in xemacs) to jump to the relevent spot(s) almost
> instantly in xemacs. I don't mean to be obstinate, but really: is this such
> a big problem?

Here it is anyway:




This is e-TeXk, Version 3.141592-2.1 (Web2C 7.5.2) (format=latex 2004.6.3)  9 JUN 2004 10:01
entering extended mode
 %&-line parsing enabled.
 (/prod/depot/_SunOS_5.8/tex/texmf/web2c/cp8bit.tcx)
**test
(./test.tex
LaTeX2e <2001/06/01>
Babel <v3.7j> and hyphenation patterns for english, dumylang, nohyphenation, ba
sque, czech, slovak, german, ngerman, spanish, catalan, french, ukenglish, ital
ian, dutch, polish, portuguese, loaded.
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/base/article.cls
Document Class: article 2001/04/21 v1.4e Standard LaTeX document class
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/base/size10.clo
File: size10.clo 2001/04/21 v1.4e Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/hyperref.sty
Package: hyperref 2003/09/15 v6.74i Hypertext links for LaTeX

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/graphics/keyval.sty
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
\@linkdim=\dimen103
\Hy@linkcounter=\count87
\Hy@pagecounter=\count88

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/pd1enc.def
File: pd1enc.def 2003/09/15 v6.74i Hyperref: PDFDocEncoding definition (HO)
)
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/texlive/hyperref.cfg
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
Package hyperref Info: Hyper figures OFF on input line 1879.
Package hyperref Info: Link nesting OFF on input line 1884.
Package hyperref Info: Hyper index ON on input line 1887.
Package hyperref Info: Plain pages ON on input line 1892.
Package hyperref Info: Backreferencing OFF on input line 1899.

Implicit mode ON; LaTeX internals redefined
Package hyperref Info: Bookmarks ON on input line 2003.
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/ltxmisc/url.sty
\Urlmuskip=\muskip10
Package: url 1999/03/28  ver 1.5x  Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 2142.
\Fld@menulength=\count89
\Field@Width=\dimen104
\Fld@charsize=\dimen105
\Choice@toks=\toks15
\Field@toks=\toks16
Package hyperref Info: Hyper figures OFF on input line 2617.
Package hyperref Info: Link nesting OFF on input line 2622.
Package hyperref Info: Hyper index ON on input line 2625.
Package hyperref Info: backreferencing OFF on input line 2632.
Package hyperref Info: Link coloring OFF on input line 2637.
\c@Item=\count90
\c@Hfootnote=\count91
)
*hyperref using default driver hdvips*
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/hdvips.def
File: hdvips.def 2003/09/15 v6.74i Hyperref driver for dvips

(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/pdfmark.def
File: pdfmark.def 2003/09/15 v6.74i Hyperref definitions for pdfmark specials
\pdf@docset=\toks17
\pdf@box=\box26
\pdf@toks=\toks18
\pdf@defaulttoks=\toks19
\Fld@listcount=\count92
\@outlinefile=\write3
)) (./test.aux)
\openout1 = `test.aux'.

LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 3.
LaTeX Font Info:    ... okay on input line 3.
Package hyperref Info: Link coloring OFF on input line 3.
(/prod/depot/_SunOS_5.8/tex/texmf/tex/latex/hyperref/nameref.sty
Package: nameref 2001/01/27 v2.19 Cross-referencing by name of section
\c@section@level=\count93
)
LaTeX Info: Redefining \ref on input line 3.
LaTeX Info: Redefining \pageref on input line 3.
\openout3 = `test.out'.

LaTeX Font Info:    External font `cmex10' loaded for size
(Font)              <14.4> on input line 4.
LaTeX Font Info:    External font `cmex10' loaded for size
(Font)              <7> on input line 4.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 4.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `subscript' on input line 4.


Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
(hyperref)                removing `math shift' on input line 4.

[1

] (./test.aux) ) 
Here is how much of TeX's memory you used:
 1873 strings out of 95536
 26119 string characters out of 1191618
 76433 words of memory out of 1531516
 4968 multiletter control sequences out of 10000+50000
 4860 words of font info for 18 fonts, out of 1000000 for 2000
 117 hyphenation exceptions out of 1000
 25i,5n,39p,158b,213s stack positions out of 5000i,500n,6000p,200000b,40000s

Output written on test.dvi (1 page, 2160 bytes).






-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/9/2004 2:04:22 PM
On 09 Jun 2004 09:51:18 -0400, Randy Yates <randy.yates@sonyericsson.com>  
wrote:

>> I'm somewhat surprised you didn't find what you were looking for.
>> Searching Google Groups for the title of this thread gives plenty of
>> hits  on the first page, where Heiko Oberdiek more or less says: Look
>> in the  documentation for \texorpdfstring.
>
> Well Morten I guess you didn't read my post thoroughly enough. The
> exact same document compiles just fine with MiKTex on a PC. Therefore
> this CANNOT be a TeX source code problem. That is, I should be able
> to use math mode in section headings at this day and time. The post by
> Heiko to which you are referring is some 4 years old.

The warnings are not about using math in section headings, they're about  
using math in bookmarks.

When using
   \usepackage{hyperref}
MiKTeX uses the hypertex.def file, which is more generic, but doesn't  
provide bookmarks. TeXLive 2003 on the other hand chooses dvips as the  
default driver in dvi-mode in this case. Add the option [dvips] to the  
document in MiKTeX and you'll see the same warnings.

> I suspect that this bug/shortcoming in the hyperref package has since
> been overcome and therefore that this is a configuration problem. I
> was hoping someone would come out and say something like, "Oh yes, the
> hyperref package in the TeXLive 2003 distribution is old/buggy - you
> need to replace it with the latest version."

The warnings are not a problem of hyperref, the PDFDocEncoding is to  
blame. If you don't need the bookmarks, then turn them off.
-- 
Morten H�gholm
I haven't got a smelly address.
UK-TUG FAQ: <URL:http://www.tex.ac.uk/cgi-bin/texfaq2html>
0
moho01ab5415 (738)
6/9/2004 2:37:39 PM
Hi Again, Morten,

Thanks for helping me. I do appreciate it. Please read a couple of
more comments/questions below.

=?iso-8859-15?Q?Morten_H=F8gholm?= <moho01ab@smelly.student.cbs.dk> writes:
> [...]
> When using
>    \usepackage{hyperref}
> MiKTeX uses the hypertex.def file, which is more generic, but doesn't
> provide bookmarks. TeXLive 2003 on the other hand chooses dvips as the
> default driver in dvi-mode in this case. 

The phrase "default driver" confuses me. I don't think you mean "device
driver" (as in something that takes as input a .dvi file and converts
it to something else) since we're dealing with the process that generates
the dvi file. What is the function of this driver and how does it fit
into LaTeX?

Is there somewhere I can learn what this "driver" stuff is about?
-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/9/2004 2:53:16 PM
Randy Yates <randy.yates@sonyericsson.com>  schrieb:

>> This gives the exact same warnings as you were experiencing.
> 
> I trust that it does. I guess I don't see what's such a big problem in
> typing "M-% PDFDocEncoded" (e.g., in xemacs) to jump to the relevent
> spot(s) almost instantly in xemacs. I don't mean to be obstinate, but
> really: is this such a big problem?
> 

Why should I want to jump to the warnings? I know what they say. I 
would suggest that you take your document to your other system, try it 
there and then compare the two log-files to see the differences. Then 
you will perhaps see what's going on. 

Btw: it's only a warning. You can simply ignore it.

-- 
Ulrike Fischer
e-mail: zus�tzlich meinen Vornamen vor dem @ einf�gen.
e-mail: add my first name between the news and the @.
0
news9686 (1970)
6/9/2004 3:56:45 PM
On 08 Jun 2004 12:01:27 -0400, Randy Yates
<randy.yates@sonyericsson.com> wrote:

>Hi All,
>
>Our IT guy just installed the TeXLive 2003 CD (Solaris 5.8) and I am
>trying it out. There were some packages I added locally, but hyperref
>was not one of them. Now I'm getting the error that is the subject of
>this message. I'm including the log file for reference.

Which contains no errors, only warnings.

>
>Normally I would have just concluded that I'd need to remove the math
>in the section names, but I know something's amiss since this compiles
>just fine on the PC using MiKTeX. 
>

You need do nothing at all, unless the output is not what you want.
Hyperref already removes the offending tokens.

>This is e-TeXk, Version 3.141592-2.1 (Web2C 7.5.2) (format=latex 2004.6.3)  
>8 JUN 2004 11:48

If you really want to compare TeXLive with MiKTeX, you could compare 
the two .log files.

>
>****************************************
>* Local config file subfigure.cfg used *
>****************************************

While not terribly likely, things like this can influence results.
You'd need to compare the two if MiKTeX also produced this.

>(/home/unix/us057845/texmf/tex/latex/subfigure/subfigure.cfg)

>Package: hyperref 2003/09/15 v6.74i Hypertext links for LaTeX

What version of hyperref on MiKTeX?
Version 2003/11/30 v6.74m (at least) is available.

>
>Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
>(hyperref)                removing `math shift' on input line 1262.
>
>Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
>(hyperref)                removing `subscript' on input line 1262.
>
>
>Package hyperref Warning: Token not allowed in a PDFDocEncoded string,
>(hyperref)                removing `math shift' on input line 1262.

So if you had \section{The equation $x^2 + 1 = 0$}, it will read (in 
the bookmarks and other non-typeset material) "The equation x2 + 1 = 0".


Dan

-- 
Dan Luecking                     Department of Mathematical Sciences
University of Arkansas           Fayetteville, Arkansas 72701
To reply by email, change Look-In-Sig to luecking
0
Look-In-Sig (1094)
6/9/2004 4:31:05 PM
On 09 Jun 2004 10:53:16 -0400, Randy Yates
<randy.yates@sonyericsson.com> wrote:

>Hi Again, Morten,
>
>Thanks for helping me. I do appreciate it. Please read a couple of
>more comments/questions below.
>
>=?iso-8859-15?Q?Morten_H=F8gholm?= <moho01ab@smelly.student.cbs.dk> writes:
>> [...]
>> When using
>>    \usepackage{hyperref}
>> MiKTeX uses the hypertex.def file, which is more generic, but doesn't
>> provide bookmarks. TeXLive 2003 on the other hand chooses dvips as the
>> default driver in dvi-mode in this case. 
>
>The phrase "default driver" confuses me. I don't think you mean "device
>driver" (as in something that takes as input a .dvi file and converts
>it to something else) since we're dealing with the process that generates
>the dvi file. What is the function of this driver and how does it fit
>into LaTeX?

The dvi format doen't allow such niceties as bookmarks, color, graphics,
hypertext links, etc. These have to be added via the \special mechanism.
The information in a \special{} command is tranferred more-or-less
literally to the dvi file.

Different drivers (yes I do mean "device drivers") recognize different 
strings marked as \special in a .dvi file and so packages that need 
this mechanism need to know what the driver will be. 
  "pdftex"   means no driver but pdflatex is the compiler
  "dvips"    means dvips will be used
etc. 

If you specify no driver option to \usepackage{hyperref}
\usepackage{graphics} or \usepackage{color} (etc.), a default is
selected. Graphics reads graphics.cfg to select a driver, and lacking
such a file, defaults to dvips. Hyperref reads hyperref.cfg, and lacking
that file it defaults to a pseudo-driver called hypertex which follows a
hyper-link standard developed many years ago and followed (more or less)
by most current dvi screen viewers. 

Both graphics.cfg (usually) and hyperref.sty (current) select pdftex
as the default if they detect pdflatex as the compiler.

Check if either of your systems contains a hyperref.cfg file, and what
its (their) contents are.

> Is there somewhere I can learn what this "driver" stuff is about?

In the current context, read the graphics, color, pict2e, and
hyperref documentation on driver issues.

Also search google for mention of "default driver" in c.t.t., and maybe
try to find info on TUG's TeX working group on driver/\special
standards.


Dan

-- 
Dan Luecking                     Department of Mathematical Sciences
University of Arkansas           Fayetteville, Arkansas 72701
To reply by email, change Look-In-Sig to luecking
0
Look-In-Sig (1094)
6/9/2004 6:17:28 PM
Hi Dan,

Thanks for clearing these things up - it is now working properly (I simply
added the [bookmarks=false] option to the hyperref invocation). 

--Randy


Dan Luecking <Look-In-Sig@uark.edu> writes:

> On 09 Jun 2004 10:53:16 -0400, Randy Yates
> <randy.yates@sonyericsson.com> wrote:
> 
> >Hi Again, Morten,
> >
> >Thanks for helping me. I do appreciate it. Please read a couple of
> >more comments/questions below.
> >
> >=?iso-8859-15?Q?Morten_H=F8gholm?= <moho01ab@smelly.student.cbs.dk> writes:
> >> [...]
> >> When using
> >>    \usepackage{hyperref}
> >> MiKTeX uses the hypertex.def file, which is more generic, but doesn't
> >> provide bookmarks. TeXLive 2003 on the other hand chooses dvips as the
> >> default driver in dvi-mode in this case. 
> >
> >The phrase "default driver" confuses me. I don't think you mean "device
> >driver" (as in something that takes as input a .dvi file and converts
> >it to something else) since we're dealing with the process that generates
> >the dvi file. What is the function of this driver and how does it fit
> >into LaTeX?
> 
> The dvi format doen't allow such niceties as bookmarks, color, graphics,
> hypertext links, etc. These have to be added via the \special mechanism.
> The information in a \special{} command is tranferred more-or-less
> literally to the dvi file.
> 
> Different drivers (yes I do mean "device drivers") recognize different 
> strings marked as \special in a .dvi file and so packages that need 
> this mechanism need to know what the driver will be. 
>   "pdftex"   means no driver but pdflatex is the compiler
>   "dvips"    means dvips will be used
> etc. 
> 
> If you specify no driver option to \usepackage{hyperref}
> \usepackage{graphics} or \usepackage{color} (etc.), a default is
> selected. Graphics reads graphics.cfg to select a driver, and lacking
> such a file, defaults to dvips. Hyperref reads hyperref.cfg, and lacking
> that file it defaults to a pseudo-driver called hypertex which follows a
> hyper-link standard developed many years ago and followed (more or less)
> by most current dvi screen viewers. 
> 
> Both graphics.cfg (usually) and hyperref.sty (current) select pdftex
> as the default if they detect pdflatex as the compiler.
> 
> Check if either of your systems contains a hyperref.cfg file, and what
> its (their) contents are.
> 
> > Is there somewhere I can learn what this "driver" stuff is about?
> 
> In the current context, read the graphics, color, pict2e, and
> hyperref documentation on driver issues.
> 
> Also search google for mention of "default driver" in c.t.t., and maybe
> try to find info on TUG's TeX working group on driver/\special
> standards.
> 
> 
> Dan
> 
> -- 
> Dan Luecking                     Department of Mathematical Sciences
> University of Arkansas           Fayetteville, Arkansas 72701
> To reply by email, change Look-In-Sig to luecking

-- 
Randy Yates
Sony Ericsson Mobile Communications
Research Triangle Park, NC, USA
randy.yates@sonyericsson.com, 919-472-1124
0
randy.yates (608)
6/9/2004 9:02:44 PM
Reply:

Similar Artilces:

Count times text string occurs in a text string
I know this is a newb question, but how do you count a text string in a text string? I am looking to count "\" in CStr(fld.Path)? I was working with a function I downloaded called getlen which calls a function strcount, but I butchered it and cannot find the source. Thanks ren ren Try this Function CountSubString(StringIn As String, SubString As String) As Long Dim pos As Long pos = InStr(StringIn, SubString) Do While pos CountSubString = CountSubString + 1 pos = pos + Len(SubString) If pos < Len(StringIn) Then pos = Instr(pos, StringIn, SubString) ...

Truncating text from a string with beginning text from another string
>From a line of arbitrary text, possibly followed by some amount of text from the beginning of the string ' Reference #\d+', where \d+ represents one or more digit characters, I want to output the line without the ending ' Reference...' string. For example, the input line 'some arbitrary text Refer' would become 'some arbitrary text'. Here are two programs that seem to do what I want, but they seem overly complicated for this task. I'm looking for a simpler solution, possibly by using a better regular expression than I have chosen in my first sample co...

Search a Text-String for two possible outputs result strings embedded in the text.
I am trying to search a string that outputs result as "Sucess" or "Failure". I am configuring a device using command prompt, and I get a text based result as shown on the front panel after the configuration has been done successfully, namely the following: &nbsp; C:\SHOAB\HCE-ME_Functional_Tester\LABVIEW_DEVELOPMENT\DIGI-ME-FCT\ConfigLoad&gt;connectprog /upload /destip=192.168.192.211 /config=C:\SHOAB\HCE-ME_Functional_Tester\LABVIEW_DEVELOPMENT\DIGI-ME-FCT\ConfigLoad\ME211Prod.rci /username=root /password=dbps /reboot Digi Connect ProgrammerVersion 1.3.19.0Copyrig...

WARNING! WARNING! WARNING!
OK, I posted earlier about uninstalling the NWN2 beta patch because of game/system weirdness. This morning I started my machine and was greeted by a McAfee Personal Firewall tray error message of some kind, and had no internet access. After checking another machine on my network and determining my service wasn't down I decided the simplest thing to do was exercise XP's Restore Point capability. Since Wednesday I'd not only installed the NWN2 beta patch, but also the latest ATI Catalyst Suite and some sort of Java Runtime update I'd been bothered about, so my system ch...

hyperref's 'Token not allowed ...'
1. With the following definition of \HyPsd@RemoveSpaceWarning, why is there '\string\kern' in the call to the function? \def\HyPsd@RemoveSpaceWarning#1{% \HyPsd@Warning{% Token not allowed in a PDF string (\ifHy@unicode Unicode\else PDFDocEncoding\fi):% \MessageBreak #1\MessageBreak removed}% } \HyPsd@RemoveSpaceWarning{\string\kern\space\the\dimen@} 2. Please what are the risks of doing the following? \let\HyPsd@RemoveSpaceWarning\@gobble \let\HyPsd@ReplaceSpaceWarning\@gobble \let\HyPsd@CatcodeWarning\@gobble On Wed, 25 Jan 2012 15:07:56 -0800 (PST), Ahmed M...

Will standard C++ allow me to replace a string in a unicode-encoded text file?
Hello, I had what I thought was normal text-file and I needed to locate a string matching a certain pattern in that file and, if found, replace that string. I thought this would be simple but I had problems getting my algorithm to work and in order to help me find the solution I decided to print each line to screen as I read them. Then, to my surprise, I noticed that there was a space between every character as I outputted the lines to the screen. I opened the file in a more competent text editor and it informed me the file was "encoded" in U-DOS. What's that, unicode? Any...

R2007b On different machines (Warning: Unable to interpret TeX string "\")
Dear all, I am having this waring on only one of the two machines where matlab is installed with the same script. Till one week ago everything was working perfectly,then something went wrong, I could have installed different fonts or changed the path. The same SCRIPT gives different results, in one of the two it is not correct. Do you have any idea of what is the problem? I tried also with other interpreters [ set(leg,'Interpreter','latex) ]. But it doesn't work. Thank you Fortunato Down you will find the script and the two outputs. SCRIPT %TestLegend.m vers=version() figure(); plot(rand(3)); %some data leg=legend('\delta','\omega_{2}','\int^{\infty}_{0}'); %some tex legend int=get(leg,'Interpreter') OUTPUT ON COMPUTER 1 vers = 7.5.0.342 (R2007b) int = tex Warning: Unable to interpret TeX string "\" Warning: Unable to interpret TeX string "\" Warning: Unable to interpret TeX string "\" Warning: Unable to interpret TeX string "\" OUTPUT ON COMPUTER 2 vers = 7.5.0.342 (R2007b) int = tex I solved the problem transposing the char. That is quite weird!!! This way it works... leg=3Dlegend(('\delta')',('\omega_{2}')',('\int^{\infty}_{0}')'); Have you got some ideas about where is the problem? Fo On Feb 1, 12:05=A0pm, Fo <FortunatoUse...@gmail.com> wrote: > Dear all, > I am having this waring on only one of the two machines where matlab...

how to replace a string by other string in a text file?
Do you have any answer to it? thx. Umesh wrote: > Do you have any answer to it? thx. > sed. -- Ian Collins. On May 30, 3:55 am, Umesh <fraternitydispo...@gmail.com> wrote: > Do you have any answer to it? thx. system("sed ...") #include <stdio.h> #include <string.h> int main () { char str[] ="This is a simple string"; char * pch; pch = strstr (str,"simple"); strncpy (pch,"sample",5); puts (str); return 0; } Quentin Godfroy wrote: > On May 30, 3:55 am, Umesh <fraternitydispo...@gmail.com> wrote: &...

Text string to Hex number string.
4-4-07 In my application I read a string in from a .txt file. The string consist of 8 groups of 2 digits representing hex codes. Like: 0112010208020211. I need to convert this in to hex numbers 01 12 01 02 08 02 02 11 so that I can attach a header and calculate a check sum. When I load 0112010208020211 into a string control set for hex display I get 3031 3132 3031 3032 3038 3032 3032 3131, which is ok because I can add my header and calculate the check sum in this form but how do I get it back to 01 12 01 02 08 02 02 11 form to send to the device under test? Thanks TeBlues &nbsp; &nbs...

Reading text file String by String
Respected sir, I am having a text File and I have to read that file string by string and I have to store these strings I an array of String. How can I acheive this. Kindly help us. "Migrators" <bkchandar@yahoo.com> wrote in message news:fa16f8ad.0312090315.4ac1b40@posting.google.com... ... > I am having a text File and I have to read that file string by string > and I have to store these strings I an array of String. How can I > acheive this. You need to look into the following classes: File, InputStream and FileInputStream. > Kindly help us. Help yourself, sta...

Writing a String (text) to a text file
I'm trying to write a string to a text data file. I want the text to appear as sort of a header in the file, to provide a description for the data appearing in the file. When I use the 'save' command, however, it doesn't write text to the file, but instead writes the numeric codes for the characters. (A string is actually a vector whose components are numeric codes for teh characters.) How do I get the string's text to appear in the .txt file as opposed to the numeric codes? Thanks! "I H" <NOSPAM_ibh7@cdc.gov> wrote in message news:<eecc7c9.-1...

VBA Access Parse out Strings in Text Strings
I have a table (tblVAS) that contains a field called VAS (Value Added Servies). This field is imported from an AS/400 and the filed contains several codes that relate to Value Added Services. The problem is that they are not ALWAYS seperated with a space, but sometimes are. I am in need of query the field and matching up the codes to the actually description in another table. example VAS coloum in tblVAS may have the following GOHSLBL MSRPCLIPHTAG in another table (tblDesc) I have the the code and the description like so: GOH - Goes on Hanger SLBL - Soccer Lift etc... MSRP- Manufacto...

How to search a string
Hi everyone, I currently have an assignment which I am almost done with but am having problems trying to figure out how to integrate a string function search. I have a text box called $targetstring. My program allows users to input items such as groceries into one text box (item_value) and add an amount to the groceries purchased (amount_value). The program will add the amounts and give a total and will validate the amount_value box for inputs that are not numerical and give an error count if anything other than a number is entered. I have also added to radio buttons that let...

Save text string and data into a text file
Hi, I've managed to create some s-parameter data in MatLab and would like to save it as an s2p file. I can save the numerical data fine, using this: %%%%%%%%%%%%%%%%%%%%%%%%%% [filename,pathname] = uiputfile('*.s2p','Save file'); if isequal(filename,0) || isequal(pathname,0) disp('User pressed cancel') return end data = [var.fplt' S11' S11phase' S12' S12phase' S21' S21phase' S22' S22phase']; save([pathname filename], data, '-ascii'); %%%%%%%%%%%%%%%%%%%%%%%%%% However, in order to get the s2p file to work i...

I have a Text control string box with some initial text. I...
I have a Text control string box with some initial text. I would like to highlight old text with click of mouse and type in new data from keyboard I have a text control string box with some initial text (says: Please enter Name). I would like the operator to click on the text control box and have it automatically highlight so that when new data is typed in the old erases (all at once) and the new data is now in the text box. I tried using the "Text.Selection" property node and when I run it and put the mouse inside the text box the initial text is highlighted and if I press "de...

Re: Writing a String (text) to a text file
How do I write to another .html file on a geocities account server? ...

Search for a string in another string allowing mismatches
Hi all, I'm sure this is a very common problem. But can't find a simple & efficient way of solving it. Basically, I want to find out if a string contains my search string as a substring. However, a certain amount of mismatches has to be allowed. Here's an example: query string: "acgt" subject string "acctaggg" If no mismatch was allowed, there would be 0 hits. If 1 mismatch was allowed, the query string would match "acct". If 2 mismatches were allowed, the query string would match "acct" and "aggg". If ...

Trying to find text within a text string
I am trying to extract text before a certain character appears in a string. This character is the letter "C". Here is some sample data - the field is called REFERENCE_2: REFERENCE_2 10299C17264 9841C17218 I want to extract 10299 for the first line and 9841 for the second line into a SQL query. I am trying to use the FIND function so I can get the position of C and do a MID function on this position from the first character to the position of C - 1, but FIND does not work in the query builer screen. I am not proficient with VB and want to use the normal query functionality. Man...

string A = string A + string B (adding strings)
Hi, how can I perform the operation of adding string to string. string_A = string_A + string_B In particular I have to do: handles.hsl_current_string{1}(hsl_current_value{1}, :) = [handles.hsl_current_string{1}(hsl_current_value{1}, :), ' ' z1_value, ' ' z2_value, ' ' z_value] where: string_A = handles.hsl_current_string{1}(hsl_current_value{1}, :) string_B = ' ' z1_value, ' ' z2_value, ' ' z_value I am dealing with GUI, string_A is the value of the listbox, and string_B is the value I would like to add to the string_B and rep...

Need help with text strings being combined with number strings.
Hey, I've made this script for class, and my teacher wants the answers to be displayed like this - "Copper of 1/4" thickness, having diameter of 28 inches, will make a suitable clock face." But, I cannot get it to display the numbers on the same line without receiving an error. Please, take a second to look at this and tell me if there is anything I can do. All you really need to look at is at the bottom at the answers comment. Thanks! % Brandon Amos % Densities in kg/m^3 and diameters Copper.Density.kgm3 = 8930; Aluminum.Density.kgm3 = 2712; CastIron.Density.kgm3 = 6...

Search a Text File for a String, Return String to Function
Howdy So while I've been able to do things similar to this in other languages I thought I'd sharpent my Perl skills but, alas, those skills were more dull then I thought. What I'm trying to do is search a text file for a string "<a href="something">" and return that something do another part of the script. The "something" part changes at random so that one day the first line of the file I am searching could be "<a href="something">" and the next day it could be "<a href="and now for something completly ...

Populating a text box with text string of table contants
Hello Can anyone help me with the following ? I have a table like this.... User_ID User_name User_email 1 Steve stelil@test.com 2 Bob bob@test.com 3 Jim jim@test.com And I would like to have a form with a text box on that show the following results... stelil@test.com <Steve> ; bob@test.com <Bob> ; jim@test.com <Jim> So that the contents of the text box can be cu and pasted into the To: field on an email.So far I have create a form based o...

Updating A Text String In A Text Field With An Update Query
If I have the following string in a text field of a table: "This is a test" can I create an update query that will change, say, the string "is" to "xyz" in the two locations where it occurs or would this require VBA? Thanks, Sheldon Potolsky Use an Update query. Something like this: UPDATE Table1 SET [F1] = Replace([F1], "is", "xyz") WHERE [F1] Like "*is*"; -- Allen Browne - Microsoft MVP. Perth, Western Australia Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps ...

extract a text, from a text file, that is contained between two strings
Hi to everybody... Can you tell me your best way to extract a text, from a text file, that is contained between two strings example: we have a file which contains these words << Ei fu. Siccome immobile, dato il mortal sospiro, stette la spoglia immemore orba di tanto spiro, .... >> I want extract that word contained between the 2 words "la" and "immemore" (this word will be "spoglia" at 3rd row, but I mean that more words could be present & contained in the same 'range') Thanks to everybody, I will be happy to read your opinions. :) Bye...

Web resources about - hyperref Warning: Token not allowed in a PDFDocEncoded string - comp.text.tex

Resources last updated: 2/25/2016 4:37:54 PM