COMPGROUPS.NET | Search | Post Question | Groups | Stream | About | Register

### reseting labels

• Email
• Follow

I have a strange question.

Basically I wrote 2 long papers with almost the same labels (yes, the
papers have similar contents).

Now I have to put both files inside a big one, where each one
represents a chapter, but they are actually independent files, with no
links. However, I have lots of redefined labels....

I would like to know if there exists an option of the type "reset
labels", such that, at the beginning of one chapter, should be able to
forgot all the preceding labels.

Claudio

 0

See related articles to this posting

Am Wed, 24 Mar 2010 03:42:20 -0700 (PDT) schrieb Claudio:

> I have a strange question.
>
> Basically I wrote 2 long papers with almost the same labels (yes, the
> papers have similar contents).
>
> Now I have to put both files inside a big one, where each one
> represents a chapter, but they are actually independent files, with no
> links. However, I have lots of redefined labels....
>
> I would like to know if there exists an option of the type "reset
> labels", such that, at the beginning of one chapter, should be able to
> forgot all the preceding labels.

No, all labels are written to the aux-file for the next latex run.
You could redefine \label and \ref at the start of the second
document so that they add a prefix to each label. But I think it is
much easier and faster to replace in one of the files each "\label{"
by e.g. "\label{D1-" and each "\ref{" by "\ref{D1-".

--
Ulrike Fischer

 0

On 24 mar, 14:28, Ulrike Fischer <ne...@nililand.de> wrote:
> Am Wed, 24 Mar 2010 03:42:20 -0700 (PDT) schrieb Claudio:
>
> > I have a strange question.
>
> > Basically I wrote 2 long papers with almost the same labels (yes, the
> > papers have similar contents).
>
> > Now I have to put both files inside a big one, where each one
> > represents a chapter, but they are actually independent files, with no
Thank you! It works very well...great answer...

> > links. However, I have lots of redefined labels....
>
> > I would like to know if there exists an option of the type "reset
> > labels", such that, at the beginning of one chapter, should be able to
> > forgot all the preceding labels.
>
> No, all labels are written to the aux-file for the next latex run.
> You could redefine \label and \ref at the start of the second
> document so that they add a prefix to each label. But I think it is
> much easier and faster to replace in one of the files each "\label{"
> by e.g. "\label{D1-" and each "\ref{" by "\ref{D1-". =A0
>
> --
> Ulrike Fischer


 0

2 Replies
132 Views

Similar Articles

12/11/2013 12:58:04 PM
[PageSpeed]

Similar Artilces:

PC reset button resets memory?
When the reset button is pressed on a standard x86 PC, the processor is reset and begins executing in the BIOS at 0xFFFF0, but is main memory affected at all by the reset? On modern Intel and AMD processors, does reset clear the L1 and L2 caches? Also, the BIOS assumes that main memory is uninitialized and will begin hosing it, but at the point that the BIOS loads the disk boot sector and jumps to it, all physical memory above 1MB remains untouched, right? On 23 Sep 2005 07:55:49 -0700, andrewspencers@yahoo.com wrote: >When the reset button is pressed on a standard x86 PC, the processor ...

labels
Have psp 9 Can someone give directions on how to print labels ? Thanks JessieJames wrote: > > Have psp 9 > Can someone give directions on how to print labels ? What aspect of this task is causing you difficulty? 1. Deciding on the correct image size 2. Placing text on the image 3. Printing an image 4. Selecting or creating a suitable print template 5. Something else If you want to print simple text labels (and I don't know if this is your intention or not) then ask yourself why you want to use an image editor for this task and not a word processing program. > Thanks I ag...

Labelling
This is a multi-part message in MIME format. ------=_NextPart_000_000A_01CD64E4.ACBB0070 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable In the instructions for authors, a journal requests the use of=20 "Theorem~\ref{thm1}" for theorem-type references and = "Eq.~\eqref{\label}" for equations.=20 Can someone explain to me fully how these work? Presumably there needs = to be some label against the Theorem that the reference is referencing, = for example. ------=_NextPart_000_000A_01CD64E4.ACBB0070 ...

Reset CMOS...
I have a whitebox laptop, the actual brand is Compal, model CL10. Would anyone know how I can rset the CMOS on it? Thanks- ...

Microblaze Reset
Is it possible to define an internal reset for a microblaze system. Idealy I would like it to come from the DCM locked signal. Do I need to define it in the XBD file or is that just for external ports? Thanks Jon --------------------------------------- Posted through http://www.FPGARelated.com On Apr 11, 8:57=A0am, "maxascent" <maxascent@n_o_s_p_a_m.n_o_s_p_a_m.yahoo.co.uk> wrote: > Is it possible to define an internal reset for a microblaze system. Ideal= y > I would like it to come from the DCM locked signal. Do I need to define i= t > ...

mailing labels
IS there a simple way to creat mailing lables in 6.0 for the ibm In article <10e767588ksol11@corp.supernews.com>, "scotlandak" <scotland@nospam.ak.net> wrote: > IS there a simple way to creat mailing lables in 6.0 for the ibm A *SIMPLE* way - no, not really. From decades of experience I can tell you that the label templates that come with all software packages are worse than useless and never actually fit the labels you buy. This is mainly thanks to the templates never taking the printer's minimum margins into account. It's better to make your own from scr...

ListLinePlot Labels
I'm trying to create a ListLinePlot with custom labels on the x-axis, i.e. "January, February..." instead of "1, 2..." The ChartLabels option doesn't seem to be compatible with ListLinePlot. Do you guys have any other suggestions, or possibly a way of hacking this with AxesLabel? You could try this: (* Adapting the documented ListLinePlot example *) Print[ListLinePlot[Prime[Range[16]], Filling -> Axis]]; x = Range[16]; y = Prime[x]; x2 = {2010, #, 1} & /@ x; Print[DateListPlot[Transpose[{x2, y}], Joined -> True, Filling -> Axis, DateTi...

labels + value
Hi there, I have a multi-language site. Texts are drwan from a mySQL db. At the contact form, there are a few obligate fields. Because the Javascript that processes the form is an external js file, it cannot handle PHP. So i wonder if there is a cross browser/platform way to get the value of the labels that belong to certain fields, so i can put them in an alert box... Hope this makes sense to you all. Thanks! ! ...

reset bios
hello my name is henry and i got a problem with one of my computer,i got a p3 with 40 gb and 1220mhz 256 ram i cant reset the password from the bios,i did remuved the jumper and still no reset help,,,,,,,hlargaespa@aol.com hlargaespa@aol.com wrote: > hello my name is henry and i got a problem with one of my computer,i > got a p3 with 40 gb and 1220mhz 256 ram i cant reset the password from > the bios,i did remuved the jumper and still no reset > help,,,,,,,hlargaespa@aol.com > You have to leave the jumper out for several minutes to allow the charge to dissipate. hlargaespa@...

Label setups
I am a novice trying to help a Non-Profit put together a format for printing labels (Avery 12-290 or such) in FilemakerPro V3. They want to transfer the Names and Addresses that they build up from clients. I have been trying to understand how to do this but I could not understand how to export the Names and Addresses and import the result into the Avery sheets. One person tried to help me but I couldn't/can't understand how and also can't fathom the Manual. Can someone help me with me to do this (or direct me to such information)? Jerry Litt g.litt@comcast.net Jerry -- what...

plane labels
Is there any way to turn off the stinking plane labels (names) but leave the plane displayed? Try renaming them using only spaces, no text. Good idea, the simplest things are always the hardest to come up with. SW must be rubbing off on me. ...

how do i reset the terminal
sometimes my terminal only outputs onto the top half of the screen. the bottom-half remains blank. how do I reset the terminal when this happens? tset doesn't work. Also how do I reset the terminal if the output turns to garbage, eg after cat'ing a binary file? thanks On Thu, 11 Aug 2005 d_dave@my-deja.com wrote: > sometimes my terminal only outputs onto the top half of the screen. the > bottom-half remains blank. how do I reset the terminal when this > happens? tset doesn't work. > > Also how do I reset the terminal if the output turns to garbage, eg > after...

Connection reset !
Hi, Over last few weeks we are having intermittent difficulties in connecting to dell server, where our e mails and Microsoft documents are stored. We will get notices on pcs, that we are no longer connected to server, and after a few minutes or so, will be reconnected. It seems to be happening with increased frequency recently. We have already changed the ports on catalyst 2950 but even then the issue is there. Any idea on what this might be ? something to do with switch or servers itself ? Thanks in advance ! Ade Commonly the auto detect feature of fast ethernet network adapters does...

Language as labeling
Is it possible to create a system, maybe similar to the periodic table of elements in chemistry, which would allow us to break words into elementary components? IMO such a system would allow to label all the possible combinations of these elements into words, concepts, etc. and create a kind of meta language. ? JP "Just Playing" <gms2004@lycos.com> wrote in message news:1131457158.778267.276740@g43g2000cwa.googlegroups.com... > Is it possible to create a system, maybe similar to the periodic table > of elements in chemistry, which would allow us to break words into &g...

Text labels...
Hi I was programming a lot in C When i wanted to make text label i was using something like: #define MY_PROGRAM_RESULTS "Result of the program = %d\n" printf(MY_PROGRAM_RESULTS, result); But this method works only when i use stdio functions... Now i have started using iostream cout<< and cin>> functions... In what way should i store text labels (if i want to display few variables in one line)? [ See http://www.gotw.ca/resources/clcm.htm for info about ] [ comp.lang.c++.moderated. First time posters: Do this! ] In article <1132957160.304033.216360...

plotyy labeling
So I'm plotting two separate functions using plotyy since I need two different y-axis. I can get the plot just fine, but am having issues with the y-labeling. I can plot both functions using plot(x1,y1,x2,y2), and my legend works by using legend('1','2'), but when I change my plot to plotyy, only the first legend and first ylabel show up. (using ylabel('1','2')) So really, I just want to be able to have my second label show up, and the right y-axis to show as well. Any ideas guys? thanks Mike bakery87@gmail.com wrote in message <3f2e7d64-d62e-42aa-...

\label in \marginpar
I am preparing a long document in which I want to put most of the illustrations in the margins with \marginpar. In addition, I want to have a lot of freedom to format the captions any way I want, so I'm not using \caption. So, for example, I have something like this Some text in the main page\marginpar{ \addtocounter{figno}{1} \includegraphics*{0rder2.pdf} \label{figno:mylabel} \raggedright \small{\currentfig. Caption produced without \caption command } } continuation of the main text In the preamble I have defined \newcommand{\currentfig}{Figure \thechapter .\arabic{fign...

Product Labels
OK guys here is a challenge. We make certain products that have requirements for labels on their front panels and cabling etc. Does anyone know of a label printer that also cuts out apertures directly from SW? At the moment we use a package from a company called LightHouse but the software is rubbish and does not have any import facility from CAD which means that you have to re-draw the panel again freehand - which is great when you have 100 holes. We have a printer called MAX CPM-100 but I am not sure if that is the weak link or the software. Any thoughts, any help? maybe this one helps. ...

labelled area
ALL = edge(EROI,'sobel'); SE = strel('disk',5,0); NewF= imdilate(ALL,SE); FinalLine = bwmorph(NewF,'thin',Inf); figure; subplot(121);imshow(NewF),title('Dilation'); subplot(122);imshow(FinalLine),title('Thinning'); [Label Num]= bwlabel(FinalLine); LabelArea = []; for kk=1:Num ST1= regionprops(Label==kk,'Area'); LabelArea(kk)= ST1.Area; end RealP = LabelArea>50; My question is for example Num= 9 RealP = 0 0 1 1 0 1 0 0 0; How do i get back the labels that are 1 in the RealP to be showed in FinalLine U...

Curve labeling
Hello I have a function y=f(x,z) that I plot in a 2D figure with plot(x,y) for a few different values of z. I'd like to label each of the curves in the figure with its corresponding z-value. Could you somebody suggest me a way of doing it? Thank you very much Leo Leo B. wrote: >Hello > >I have a function y=f(x,z) that I plot in a 2D figure with plot(x,y) for a >few different values of z. I'd like to label each of the curves in the >figure with its corresponding z-value. > >Could you somebody suggest me a way of doing it? > >Thank you very much >...