f



AIX 4.1.5 for Clients vs. regular AIX 4.1.5

Hi,

My IBM RS/6000 Notebook 860 portable workstation was originally packaged
with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference
with the regular 4.1.5?

Many thanks,

    Emeric


-- 
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
0
9/29/2006 3:28:12 PM
comp.unix.aix 10963 articles. 1 followers. drkirkby (98) is leader. Post Follow

1 Replies
1132 Views

Similar Articles

[PageSpeed] 58

Emeric Maschino wrote:
> Hi,
>
> My IBM RS/6000 Notebook 860 portable workstation was originally packaged
> with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference
> with the regular 4.1.5?
>
> Many thanks,
>
>     Emeric
>
>
> --
> Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

can't remember for sure, I also had an Aix portable

I seem to recall the difference being it lacked some server daemons,
required
less disk space and less memory than the "Server" versions.
I think the early days of 4.2 also had a "clients" and "server"
editions.
Here is a link to additional info on your machine:

http://www.nand.net/~rjhawkin/ppc850tp/IBM_Offering_for_860.html

0
aixdude (287)
9/29/2006 6:01:12 PM
Reply:

Similar Artilces:

moving xlc 5.0.1 on aix 4.3 to aix 5.2?
We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. I remember reading xlc 5.0.2 is required to be used for AIX 5.2. Does this mean we have to purchase a new compiler, or is there an upgrade available. thank you sol sol gongola wrote: > We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 > We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. > > I remember reading xlc 5.0.2 is required to be used for > AIX 5.2. Does this mean we have to purchase a new > compiler, or is there an upgrade available. Just install updates....

[ace-users] Tests failed : ACE 5.5.2 - AIX 5.3
Hi, My first mail before my message in the group failed (my subscription was not activated). The PRF below describes my problems. I can compile and link but several ACE's tests fail. I only use ACE library and only compile it by cd'ing in the ace directory before running make. I already made some fixes described below to compile and to link the library. I'm not abble to interpret the faild tests to identify the problem source or area. I didn't find the scoreboard before my mail. I see that several tests fails for all compilations on AIX. I try to reassure myself by looking these results, it's not only for my configuration. But it's a daily build with last development version. For the 5.5.2 stable version they should probably not fail ? Regards, PO Houot. ACE VERSION: 5.5.2 HOST MACHINE and OPERATING SYSTEM: bash-3.00$ uname -a AIX localhost 3 5 0040983B4C00 unknown unknown AIX bash-3.00$ oslevel -r 5300-05 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: Same as host COMPILER NAME AND VERSION (AND PATCHLEVEL): bash-3.00$ g++ -v Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 This compiler is installed from packages provided by UCLA AIX Software library THE $ACE_ROOT/ace/config.h FILE : bash-3.00$ more $ACE_ROOT/ace/config.h #include "ace/config-aix-5.x.h" T...

Looking for AIX 4.1.2 -> 4.1.5
Hi, Does anyone have AIX version between 4.1.2 - 4.1.5 for sale? I am looking for these versions because I intend to install it onto PowerPC thinkpad and these versions should be comaptible with it. You can contact me at tero.kaarlela at kotinet.com Tero Kaarlela ...

AIX 4.1.2 -> 4.1.5 wanted
Hi, I would like to buy AIX version between 4.1.2 and 4.1.5. On original CD's. If someone has these please inform me at. tero dot kaarlela at kotinet dot com Tero Tero Kaarlela schrieb: > Hi, > > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. > > > tero dot kaarlela at kotinet dot com > > > Tero Somewhere I have original 4.x-Update CDs. Tomorrow I will send you more infos by email. Andreas Kohl Tero Kaarlela schrieb: > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. Look into your mailbox. -- Uli Tero Kaarlela wrote: > Hi, > > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. > > > tero dot kaarlela at kotinet dot com > > > Tero Thanks for all who helped me. Now I finally found what I needed: AIX for my thinkpad. Tero ...

Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
Hi All Need docmented notes of step by step installing NIM Server on AIX 5.1 Server. Send me also documented notes on installing the NIM client for Aix 5.2 & 5.1. You can send the docs to prsanwal@gmail.com mail account. Awaiting your quick response. Warm Regards Prateek S How about go search IBM's web site and use the man pages... then if you get stuck, come back here and ask for help... We're not here to do your job for you. seriously! jeez prateek... have a little tact man! you want us to find you a bunch of documentation and mail it to you? and quickly? come on dude... ...

Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2
Hi, I am searching for information on installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 platform. Is it possible? Regards Yes, it works. Follow the installation instruction on tomcat web site. You might have issues with running stanalone Tomcat/SSL server on AIX due to the conflicts in JDK implementations used on AIX and the one to develop Tomcat ( Sun and IBM aren't play nice in there )... Other than that -- works just fine. Thx a lot for your reply. Can Tomcat use AIX's Java platform ? Is it mandatory to install SUN's JDK on AIX ? In this last case, would you please tell...

Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 #2
Hi, I am searching for information on installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 platform. Is it possible? Regards ...

HACMP/ES 4.4.1 unstable after ML02 to ML04 update (AIX 5.1)
Hello I'd like to ask if anyone has come across a similar situation. Hardware: P660 OS: AIX 5.1, HACMP/ES 4.4.1 Problem description: After installing ML02 to ML04 maintanance package, severe problem with HACMP software has occured. Namely, a few minutes after hacmp services were orderd to start, clstrmgrES process terminated abnormaly, which caused emergency system shutdown ("halt -q"). That happend every time hacmp services were started. In order to fix that problem, I deceided to install "IY21118: BASE FIXES FOR HACMP 4.4.1", which improved the situation a lot, ...

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 (fwd)
I have done some research on this problem. The host resolve code does not complete successfully. I have traced the error to the routine at /kerberos/mit/krb5-1.4/src/lib/krb5/os/dnsglue.c. In the routine a call is made to res_ninit to provide dns information for the kdc. res_ninit updates the structure at statbuf but overlays memory 72 bytes past the structure boundary. I have opened a problem with IBM on res_ninit. The problem is not yet resolved but IBM suggested using a malloc for the structure instead of static storage. I am trying to get IBM to correct the error in res_ninit. No resoultion yet. >Delivery-Date: Thu, 21 Apr 2005 12:15:05 -0600 >Return-Path: <owner-kerberos@lanl.gov> >X-Original-To: hgm@localhost.localdomain >Delivered-To: hgm@localhost.localdomain >Received: from localhost (localhost.localdomain [127.0.0.1]) > by moki.lanl.gov (Postfix) with ESMTP id 15AAB68739 > for <hgm@localhost.localdomain>; Thu, 21 Apr 2005 12:15:05 -0600 > (MDT) >Received: from ccn-mail.lanl.gov [128.165.4.105] > by localhost with POP3 (fetchmail-6.2.5) > for hgm@localhost.localdomain (single-drop); Thu, 21 Apr 2005 > 12:15:05 -0600 >(MDT) >Received: from ccn-mail.lanl.gov ([unix socket]) > by ccn-mail.lanl.gov (Cyrus v2.2.3-Red Hat 2.2.3-6.lanl) with > LMTP; Thu, 21 >Apr 2005 12:11:13 -0600 >X-Sieve: CMU Sieve 2.2 >Received: from mailrelay3.lanl.gov (mail...

RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 #2
Downloaded KRB5 1.4.1 and the installation worked great with GCC and AIX make. None of the problems that were encountered with 1.4.0 and the unbalanced "(". The problem with: /usr/local/kerberos/bin/kinit -V kinit(v5): Cannot resolve network address for KDC in requested realm while getting initial credentials still exist. If I force it to version 4 KRB it seems to work with the krb5.conf: /usr/local/kerberos/bin/kinit -4 xxxxxxx Password for xxxxxx@xxx.xxxxxxxxxx.xxx: kinit(v4): Can't send request (send_to_kdc) The krb5.conf file is the same file that worked with the 1.3.6 version of KRB5. It does not seem to work with KRB 1.4 or 1.4.1. Any one having similar problems or solutions ? Thanks, Lamar -----Original Message----- From: Saxon, Lamar Sent: Monday, April 25, 2005 11:08 AM To: 'Tom Yu' Cc: kerberos@mit.edu Subject: RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 The compile with CC works with no issues. The other issue still remains. "Cannot resolve network address for KDC in requested realm while getting initial credentials" I tried kinit with the -k and verbose; but not with a password. I will post the results once I get it accomplished. Thanks, Lamar -----Original Message----- From: Tom Yu [mailto:tlyu@MIT.EDU] Sent: Thursday, April 21, 2005 2:18 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 >>>>> "Lamar" == <Lamar.Saxon@americredit.com> writes: La...

Oracle 8.1.7
Hello All; Our Oracle installation is being outsourced. Currently it is hosted by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 will be the hosting o/s. The Oracle installation will remain at version 8.1.7. I've heard that AIX 5.2 uses 64-bit addressing whereas AIX 4.3 uses 32-bit addressing. Does anyone know of any potential issues/problems with such a migration? Thanks! Michael "michael brule" <michael.brule@phoenixwm.com> wrote in message news:55f7800f.0411290816.6c66d00e@posting.google.com... > Hello All; > > Our Oracle installation is being outsourced. Currently it is hosted > by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 > will be the hosting o/s. The Oracle installation will remain at > version 8.1.7. > > I've heard that AIX 5.2 uses 64-bit addressing whereas AIX 4.3 uses > 32-bit addressing. Does anyone know of any potential issues/problems > with such a migration? > > Thanks! > > Michael Hi, Check Metalink notes 225551.1, 222404.1, 169426.1, 223522.1 and 231901.1. Regards... "michael brule" <michael.brule@phoenixwm.com> wrote in message news:55f7800f.0411290816.6c66d00e@posting.google.com... > Hello All; > > Our Oracle installation is being outsourced. Currently it is hosted > by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 > will be the hosting o/s. The Oracle installation will remai...

gcc 4.1.1 on AIX 5.2
How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? Compiling GCC 4.1.1 has been taking days ( more than 72 hours) on my machine and its still compiiiiiiiiiiiiiiiiiiling. My machine is relatively less loaded and the only process running is compiling GCC. I'm having to compile GCC 4.1.1 because to be able to use libstdc++, one needs to compile gcc with some assembler patches on the machine (as per http://gcc.gnu.org/install/specific.html#x-ibm-aix) My machine shows oslevel -r as 5200-04, which according to http://techsupport.services.ibm.com/ already has all the required fixes. Any hints on what is wrong with my machine?? Thanks in advance! Ravindra. In article <1166104996.447605.120150@l12g2000cwl.googlegroups.com>, "Ravindra" <ravindra.rajaram@gmail.com> writes: > How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? I think you can download it precompiled from http://aixpdslib.seas.ucla.edu/packages/gcc.html Ravindra wrote: > How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? > Compiling GCC 4.1.1 has been taking days ( more than 72 hours) on my > machine and its still compiiiiiiiiiiiiiiiiiiling. > My machine is relatively less loaded and the only process running is > compiling GCC. > I'm having to compile GCC 4.1.1 because to be able to use libstdc++, > one needs to compile gcc with some assembler patches on the machine (as > per http://gcc.gnu.org/install/specif...

AIX 5.1 / VAC 6.0 vs AIX 5.2 / patched VAC 6.0
Hi everybody, I am trying to build some C++ application on the following environment: AIX 5.2 / patched Visual Age C++ 6.0. This application is based on libraries built for the AIX 5.1 / Visual Age C++ 6.0 (base, ie no patch) platform. Compilation works fine. However link results in unresolved symbols (defined in the above libraries). According to IBM support: - AIX 5.1 / Visual Age C++ 6.0 is a supported platform - AIX 5.2 / Visual Age C++ 6.0 with lattest patch is a supported platform - AIX 5.2 / Visual Age C++ 6.00 base version (ie without any patch) isn't a supported platform (!...

power2 model 590 / AIX 5.1 and 43P-150/ AIX 4.3.3
Does anyone know whether it is possible to run AIX 5.1 on Power2 Model 590 ? or to run AIX 4.3.3 on 43P-150? I am new to AIX, I would appreciate if anyone can point me to the support matrix from IBM. thanks anna schrieb: > Does anyone know whether it is possible to run AIX 5.1 on Power2 Model > 590 ? or to run AIX 4.3.3 on 43P-150? > Both works. -- Uli (Reply to ulrich <dot> link <domain-delimiter> epost <dot> de) Uli Link wrote: > anna schrieb: > >> Does anyone know whether it is possible to run AIX 5.1 on Power2 Model >> 590 ? or to r...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

Java 1.5 on AIX 5.1?
Is there such a thing as a Java 1.5 JRE that will run on AIX 5.1? The most recent Java SDK that would run on AIX 5.1 that I could find on the IBM web site was 1.4. Am I looking in the wrong place? Unfortunately, we need to stick with AIX 5.1 on this particular machine, as we are using it for building and testing software that is intended to run on 5.1. Scott Norwood wrote: > Is there such a thing as a Java 1.5 JRE that will run on AIX 5.1? > The most recent Java SDK that would run on AIX 5.1 that I could > find on the IBM web site was 1.4. Am I looking in the wrong place? Nope. If that's what it says, that's the restriction. > Unfortunately, we need to stick with AIX 5.1 on this particular > machine, as we are using it for building and testing software that > is intended to run on 5.1. Good point. But if Java 1.5 isn't supported on AIX 5.1, there's no point in trying to support that config in your testing/product. ...

problem with VisiBroker 5.2 with java 1.4.1 on AIX
There is small CORBA server. It works with VisiBroker 5.2, java 1.3.1 on AIX 5. After migration to java 1.4.1 server doesn't work. Exeption occuars in ORB.init method: java.lang.NoClassDefFoundError: sun/security/provider/Sun at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:173) at com.inprise.vbroker.orb.ORB.installServiceCollection(ORB.java:1257) at com.inprise.vbroker.orb.ORB.installServices(ORB.java:1298) at com.inprise.vbroker.orb.ORB.initialize(ORB.java:1089) at com.inprise.vbroker.orb.ORB.se...

Problem compiling mysql 4.1.11 on AIX 5.1
Hi all! I'm having trouble building the latest stable release (4.1.11) of MySQL on AIX 5.1. Hope you can offer some assistance to get this running. Apologies for the longish post.. I tried to be thorough, yet concise in my message snips. My environment is as follows: Relevant GNU tools: autoconf-2.58-1.aix5.1.noarch.rpm automake-1.7.9-1.aix5.1.noarch.rpm binutils-2.14-3.aix5.1.ppc.rpm bison-1.875-2.aix5.1.ppc.rpm flex-2.5.4a-6.aix4.3.ppc.rpm gcc-3.3.2-4.aix5.1.ppc.rpm libtool-1.5-2.aix5.1.ppc.rpm m4-1.4.1-1.aix5.1.ppc.rpm make-3.80-1.aix5.1.ppc.rpm patch-2.5.4-4.aix4.3.ppc.rpm zlib-1...

Reverse binary compatibility between AIX 5.2 and AIX 5.1
Hi , I wrote a simple "hello world" program on AIX5.2 using gcc compiler . The resultant binary exe(name - getpqstatus) when i ran on AIX5.1 it is giving the below error : exec(): 0509-036 Cannot load program ./getpqstatus because of the following errors: 0509-130 Symbol resolution failed for getpqstatus because: 0509-136 Symbol __strtollmax (number 15) is not exported from dependent module /usr/lib/libc.a(shr.o). 0509-192 Examine .loader section symbols with the 'dump -Tv' command. Does anyone has any ide...

krb5-1.4 build fails on AIX 5.2 ML 4
Hello, I tried to compile krb5-1.4 package with IBM C++ 6.0. Here is the result: # ./configure --prefix=/opt/freeware --without-tcl --without-krb4 After few make runs I see better where the error is... # make Lines removed.... making all in lib/des425... Target "all" is up to date. Target "all" is up to date. making all in lib/kdb... Target "all" is up to date. Target "all" is up to date. Target "all" is up to date. making all in lib/gssapi... making all in lib/gssapi/generic... Target "all" is up to date. Target "all" is up to date. making all in lib/gssapi/krb5... /bin/sh: 0403-057 Syntax error at line 1 : `(' is not matched. make: 1254-004 The error code from the last command is 2. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. After few minutes I located the error to GSSAPI Makefile. # pwd /opt/freeware/lib/krb5-1.4/src/lib/gssapi # make making all in generic... Target "all" is up to date. Target "all" is up to date. making all in krb5... /bin/sh: 0403-057 Syntax error at line 1 : `(' is not matched. make: 1254-004 The error code from the last command is 2. Stop. make: 1254-004 The error code from the last command is 1. Sorry to say I do not kown how to debug makefile. What I can do next? I tested also on AIX 4.3.3 but t...

Error compiling gcc/g++ 4.1.1 on AIX 5.2
Hi, I'm trying to compile gcc/g++ 4.1.1 on AIX 5.2. I called configure with parameters --disable-aix64 --disable-nls --enable-languages=c++. At first everything seams to work fine, but then I get lots of errors while compiling <builddir>/gcc/insn-conditions.c, like <srcdir>/gcc/config/rs6000.md:4695: error 'TARGET_POWER2' undeclared here (not in a function) <srcdir>/gcc/config/rs6000.md:4695: error 'TARGET_HARD_FLOAT' undeclared here (not in a function) followed by <srcdir>/gcc/config/rs6000.md:4696: warning: missing initializer <srcdir>/gcc/config/rs6000.md:4696: warning: (near initialization for 'insn_conditions[1].value') Any ideas what's going wrong here? Michael On 24 Jun., 22:01, "Michael H." <aixrepair...@yahoo.de> wrote: > Hi, > > I'm trying to compile gcc/g++ 4.1.1 on AIX 5.2. I called configure > with parameters --disable-aix64 --disable-nls --enable-languages=c++. > At first everything seams to work fine, but then I get lots of errors > while compiling <builddir>/gcc/insn-conditions.c, like > Hi, I found the answer in mailing list gnu-bugs. The reason is a bug in gawk (see GCC Bugzilla Bug 19601). After installing a new version of gawk (3.1.5) the error does no longer occur. Michael ...

ACE migration from 5.3 to 5.4.1 ACE_Svc_Tuple does not exist in ACE 5.4.1
To: ace-bugs@cs.wustl.edu Subject: [area]: [synopsis] ACE VERSION: 5.4.1 HOST MACHINE and OPERATING SYSTEM: (Red Hat Linux 3.2.2-5 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): ACE_wrappers]$ gcc --version gcc (GCC) 3.2.2 20030222 (Red Hat Linux 3.2.2-5) Copyright (C) 2002 Free Software Foundation, Inc. make static_libs=1 shared_libs=1 inline=1 threads=1 exceptions=1 fast=1 ssl=1 CONTENTS OF $ACE_ROOT/ace/config.h ln -s $ACE_ROOT/ace/config-linux.h $ACE_ROOT/ace/config.h CONTENTS OF $ACE_ROOT/include/makeinclude/platform_macros.GNU: ln -s $ACE_ROOT/include/makeinclude/platform_linux.GNU $ACE_ROOT/include/makeinclude/platform_macros.GNU AREA/CLASS/EXAMPLE AFFECTED: DOES THE PROBLEM AFFECT: COMPILATION? LINKING? EXECUTION? OTHER (please specify)? ACE is OK. My application is affected. SYNOPSIS: DESCRIPTION: We are migrating from ACE 5.3 on Solaris to Linux RedHat 9 ACE 5.4.1. Our application is using ACE_Svc_Tuple class. This class has disappeared from ACE 5.4.1 source code. Documentation or ChangeLog does not provide migration strategy. Question: What is the migration solution for ACE_Svc_Tuple? Thank You Chris REPEAT BY: Chris SAMPLE FIX/WORKAROUND: [If available ] Hi > To: ace-bugs@cs.wustl.edu > Subject: [area]: [synopsis] > > ACE VERSION...

RE: [ace-users] ACE 5.4 on AIX 5.1 Linking issues?
Hi Ashish, Thank you for the PROBLEM-REPORT-FORM. Please try your compile/link command with the -L and -l options after your source file name. Like this: g++ -I /home/ACE_wrappers ACETest.cpp -L /home/ACE_wrappers/ace -lACE Best regards, -Steve -- Steve Huston, Riverace Corporation New! ACE Training - http://www.riverace.com/training.htm ACE book info at http://www.riverace.com/acebooks/ -----Original Message----- From: owner-ace-users@cse.wustl.edu [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of ashish borkar Sent: Friday, May 13, 2005 5:18 AM To: ace-users@cs.wustl.edu Subject: [ace-users] ACE 5.4 on AIX 5.1 Linking issues? ACE VERSION: 5.4 HOST MACHINE and OPERATING SYSTEM:AIX 5.1 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): g++ 3.3.2, also g++ 3.0.4 CONTENTS OF $ACE_ROOT/ace/config.h: // Config file for AIX 5.1 // This define is needed for building with Visual Age C++ 5 in incremental // mode. In the batch mode build, platform_aix_ibm.GNU sets it. The incremental // mode compiler won't be supported after ACE 5.3, so this will also go away // in that timeframe, so don't worry about future AIX versions. #if !defined (ACE_AIX_VERS) # define ACE_AIX_VERS 501 #endif #include "ace/config-aix-4.x.h" // AIX 5.1 has AIO, but it doesn't have the same API as other POSIX // systems, and the semantics of operations a...

Web resources about - AIX 4.1.5 for Clients vs. regular AIX 4.1.5 - comp.unix.aix

Fat client - Wikipedia, the free encyclopedia
the name is contrasted to thin client , which describes a computer heavily dependent on a server's applications. A fat client still requires ...

Facebook Forms EMEA Client Council
Facebook announced the formation of its EMEA Client Council in a post in Spanish on the Facebook for Business page by vice president for Europe, ...

Facebook India Client Council - Facebook for Business
The India Client Council provides a forum for leading marketers to discuss the future of business and marketing in India.

Gallop Labs hires former Facebook Client Partner as Director of Sales
Gallop Labs , a social marketing and analytics firm, announced that it has hired former Facebook Client Partner Andrew Peebles as the company’s ...

CommInsure feels the heat from super fund clients
CommInsure risks losing contracts worth hundreds of millions of dollars after claims of unethical practices.

Morgan Stanley: Ami Forte accused of sleeping with client, milking account for fees
A TOP Morgan Stanley financial adviser accused of churning the account of a married client — while carrying on a 12-year affair with the man ...

CommInsure feels the heat from super fund clients
CommInsure risks losing contracts worth hundreds of millions of dollars after claims of unethical practices.

Lloyd Rayney returns with win as client's drug case collapses
Perth barrister Lloyd Rayney has chalked up a win in his first case since returning to the legal profession, with his client acquitted on drug ...

Will Jones Day Drop Donald Trump As A Client?
Probably not but many lawyers at the firm wouldn't mind saying "you're fired" to the controversial candidate.

Macquarie Bank licence curbed by ASIC after client accounts breach
Macquarie will have restrictions on its banking licence after ASIC said it broke rules on withdrawals from client trust accounts.

Resources last updated: 3/26/2016 8:05:53 PM