f



AIX 6.1 kload()

Hi Everyone,

My application has 
one executable: example.exe
one library:libcapt.so 
libcapt.so links to libsub.so.

example.exe loads libcapt.so using dlopen().
libcapt.so and libsub.so has both 32 bit and 64 bit versions.
/opt/example/lib - contains 32 bit versions
/opt/example64/lib - contains 64 bit versions.

I have two AIX 6.1 setups where I am seeing a difference in loading libcapt.so library.

LIBPATH="/opt/example/lib:/opt/example64/lib" is exported on both machines.
Just before dlopen() call I am doing chdir() to /opt/example64/lib path.

Problem:
     While loading libcapt.so on MC2, i am getting bad magic number error and loading library fails. on this machine it is trying load libsub.so from /opt/example/lib 32 bit directory.

Below are truss output findings on both machines:

On MC1:
kload("/opt/simpana/Base64/libCvIbsad.so", 17367680, "") = 648518346072921824
Here no LIBPATh is passed to kload().



On MC2:
 kload("/opt/example64/lib/libcapt.so", 17367680, "/opt/example/lib:/opt/example64/lib:/usr/lib") = 0
Here, I am receiving bad magic number error as it is referring libsub.so from /opt/example/lib while loading libcapt.so.


1. I am calling dlopen(), will it call kload() on AIX?
2. any idea why LIBPATH is not being passed to kload() in MC1?

If I set the LIBPATH to /opt/example64/lib, it works fine in MC2.  But I could not understand why it is not failing on MC1. The only difference I see is kload() does not get the LIBPATH value.

Thank you.

Regards,
Ravi Thati
0
gotothati
1/17/2013 9:02:45 AM
comp.unix.aix 10963 articles. 1 followers. drkirkby (98) is leader. Post Follow

3 Replies
3084 Views

Similar Articles

[PageSpeed] 2

gotothati@gmail.com schrieb:

> My application has
> one executable: example.exe
> one library:libcapt.so
> libcapt.so links to libsub.so.
>
> example.exe loads libcapt.so using dlopen().
> libcapt.so and libsub.so has both 32 bit and 64 bit versions.
> /opt/example/lib - contains 32 bit versions
> /opt/example64/lib - contains 64 bit versions.
>
> I have two AIX 6.1 setups where I am seeing a difference in loading libcapt.so library.
>
> LIBPATH="/opt/example/lib:/opt/example64/lib" is exported on both machines.
> Just before dlopen() call I am doing chdir() to /opt/example64/lib path.
>
> Problem:
>       While loading libcapt.so on MC2, i am getting bad magic number error and loading library fails. on this machine it is trying load libsub.so from /opt/example/lib 32 bit directory.
>
> Below are truss output findings on both machines:
>
> On MC1:
> kload("/opt/simpana/Base64/libCvIbsad.so", 17367680, "") = 648518346072921824
> Here no LIBPATh is passed to kload().
>
>
>
> On MC2:
>   kload("/opt/example64/lib/libcapt.so", 17367680, "/opt/example/lib:/opt/example64/lib:/usr/lib") = 0
> Here, I am receiving bad magic number error as it is referring libsub.so from /opt/example/lib while loading libcapt.so.
>
>
> 1. I am calling dlopen(), will it call kload() on AIX?
> 2. any idea why LIBPATH is not being passed to kload() in MC1?
>
> If I set the LIBPATH to /opt/example64/lib, it works fine in MC2.  But I could not understand why it is not failing on MC1. The only difference I see is kload() does not get the LIBPATH value.

When you link example use the -blibpath:/opt/example64/lib:/usr/lib:/lib 
linker flag for the 64bit executable and
-blibpath:/opt/example/lib:/usr/lib:/lib for the 32bit one.

Better way: archive both the 64- and 32bit .so shared libs into a single 
..a archive and link against the .a instead. Then the loader will find 
the correct object. But you have to do this for all predependencies 
bottom up.
As long as the objects are not stripped, you can relink them with ld.

Another question: Why do you still build a 32bit application on AIX 6.1?
AIX 6.1 does not run on 32bit hardware, so it is safe to assume 64bit. 
If you want/must support AIX 5.x too, to must build on AIX 5.x too. It 
also safe to assume that a 32bit only system is running AIX 5.3 or 
earlier and is End-of-Life.

-- 
Uli Link
0
Uli
1/17/2013 10:40:22 AM
Thank you Uli Link.

On Thursday, January 17, 2013 4:10:22 PM UTC+5:30, Uli Link wrote:

> 
> 
> 
> > My application has
> 
> > one executable: example.exe
> 
> > one library:libcapt.so
> 
> > libcapt.so links to libsub.so.
> 
> >
> 
> > example.exe loads libcapt.so using dlopen().
> 
> > libcapt.so and libsub.so has both 32 bit and 64 bit versions.
> 
> > /opt/example/lib - contains 32 bit versions
> 
> > /opt/example64/lib - contains 64 bit versions.
> 
> >
> 
> > I have two AIX 6.1 setups where I am seeing a difference in loading libcapt.so library.
> 
> >
> 
> > LIBPATH="/opt/example/lib:/opt/example64/lib" is exported on both machines.
> 
> > Just before dlopen() call I am doing chdir() to /opt/example64/lib path.
> 
> >
> 
> > Problem:
> 
> >       While loading libcapt.so on MC2, i am getting bad magic number error and loading library fails. on this machine it is trying load libsub.so from /opt/example/lib 32 bit directory.
> 
> >
> 
> > Below are truss output findings on both machines:
> 
> >
> 
> > On MC1:
> 
> > kload("/opt/simpana/Base64/libCvIbsad.so", 17367680, "") = 648518346072921824
> 
> > Here no LIBPATh is passed to kload().
> 
> >
> 
> >
> 
> >
> 
> > On MC2:
> 
> >   kload("/opt/example64/lib/libcapt.so", 17367680, "/opt/example/lib:/opt/example64/lib:/usr/lib") = 0
> 
> > Here, I am receiving bad magic number error as it is referring libsub.so from /opt/example/lib while loading libcapt.so.
> 
> >
> 
> >
> 
> > 1. I am calling dlopen(), will it call kload() on AIX?
> 
> > 2. any idea why LIBPATH is not being passed to kload() in MC1?
> 
> >
> 
> > If I set the LIBPATH to /opt/example64/lib, it works fine in MC2.  But I could not understand why it is not failing on MC1. The only difference I see is kload() does not get the LIBPATH value.
> 
> 
> 
> When you link example use the -blibpath:/opt/example64/lib:/usr/lib:/lib 
> 
> linker flag for the 64bit executable and
> 
> -blibpath:/opt/example/lib:/usr/lib:/lib for the 32bit one.
> 
> 
> 
> Better way: archive both the 64- and 32bit .so shared libs into a single 
> 
> .a archive and link against the .a instead. Then the loader will find 
> 
> the correct object. But you have to do this for all predependencies 
> 
> bottom up.

It has several other library which make it difficult to make .a library. So we are going with .so files.
> 
> As long as the objects are not stripped, you can relink them with ld.
> 
> 
> 
> Another question: Why do you still build a 32bit application on AIX 6.1?
32 bit are built for older versions.
> 
> AIX 6.1 does not run on 32bit hardware, so it is safe to assume 64bit. 
> 
> If you want/must support AIX 5.x too, to must build on AIX 5.x too. It 
> 
> also safe to assume that a 32bit only system is running AIX 5.3 or 
> 
> earlier and is End-of-Life.
> 
Yes, the program is compiled for all AIX versions include AIX5.3.
If the application example.exe interacts is of 32 bit software running on AIX6.1, it will have to load from 32 bit version even though it is AIX6.1 64 bit running.

Any inputs on kload() functionality? where does it take the LIBPATH values from?
> 
> 
> -- 
> 
> Uli Link

0
gotothati
1/18/2013 8:57:33 AM
gotothati@gmail.com wrote:
> 2. any idea why LIBPATH is not being passed to kload() in MC1?
>

example.exe wouldn't be setuid root on MC1, wouldn't it?
0
Gerard
1/22/2013 9:47:18 PM
Reply:

Similar Artilces:

fuser functionality seems to have changed in AIX 6.1 TL8 and AIX 7.1
Hi AIX Gurus, Our company has some scripts that are used to check if users are logged int= o a specific directory or file system, and the script uses the fuser comman= d. What we do is look at the PIDs listed in "fuser ${pathname}" to determine w= hich users are accessing what files. This is done so we can do maintenance = at times. We make sure all users are out of the directory, have a method to= keep them out, then do our backups or maintenance or whatever. The problem we are encountering is with AIX 6.1 TL8 and above. It seems tha= t IBM may have made a change so that a non-root user can only see their own= PIDs when running fuser, and not all of the PIDs associated with that path= .. Example from AIX 5.1, 5.3, and early 6.1 systems: # whoami office1 # oslevel -s=20 6100-06-01-1043 # fuser -u /qc/sample /qc/sample: 2490476c(postgres) 5767176c(postgres) 6094882c(postgres) 67504= 34c(postgres) 6815922c(postgres) 7143588c(postgres) 7471358c(postgres) 7799= 036c(postgres) 8913140c(postgres) 11600120c(postgres) 11731066c(1008) 12976= 256c(postgres) 13303960c(postgres) 13500622c(postgres) 13566180c(postgres) = 13893696c(postgres) 15138826c(postgres) 15466614c(postgres) 16842792c(postg= res) 18153666c(1009) 18612404c(postgres) 18743530c(postgres) 19071062c(1010= ) 19202252c(postgres) 19267626c(postgres) 19595344c(postgres) 20709580c(pos= tgres) 20840526c(postgres) 23658578c(postgres) 23986214c(postgres) 25100526= c(postgres) 2...

AIX 5.1 / VAC 6.0 vs AIX 5.2 / patched VAC 6.0
Hi everybody, I am trying to build some C++ application on the following environment: AIX 5.2 / patched Visual Age C++ 6.0. This application is based on libraries built for the AIX 5.1 / Visual Age C++ 6.0 (base, ie no patch) platform. Compilation works fine. However link results in unresolved symbols (defined in the above libraries). According to IBM support: - AIX 5.1 / Visual Age C++ 6.0 is a supported platform - AIX 5.2 / Visual Age C++ 6.0 with lattest patch is a supported platform - AIX 5.2 / Visual Age C++ 6.00 base version (ie without any patch) isn't a supported platform (!...

Users Account Migration from AIX 5L to AIX 6.1
Hi to all, We have an older server and try to move the content to a new LPAR on another machine. We install all the necessary s/w to new server, and now it is time to copy the web content to the new server. However at this point, we want to keep the ownership, group, history information for those files. That's why we use the -p option of scp. However, all the necessary account information should also exist in the new system as well, o.w. we will see just user and group id's instead of their names. How can we handle this issue? I mean, the best practice is to copy the passwd, group and...

pthreads/dlopen issue when building krb-1.6.3 on AIX 6.1?
I'm attempting to build MIT Kerberos version 1.6.1 on AIX 6.1. I'm mostly in need of the client libraries and utilities. I'm using the following special additions to the build environment: $ export PTHREAD_LIBS="-lpthread" $ export RPATH_FLAG="-Wl,-brtl,-blibpath:" I'm using the following ./configure command: $ ./configure --prefix=/usr/local/krb5-1.6.3 --enable-log-preauth-logins --enable-login-print-issue --with-multihomed-fixes --enable-app-proxy --with-passive-mode-off --without-anonymous-ftp And I get the following resul...

AIX 6.1 kload() not taking LIBPATH o
Hello everyone, I am having two AIX 6.1 setups where I see two types of behavior and trying to understand the difference. My application dlopen()'s a library. The path where the library located is "/opt/example/lib". I am doing chdir() to this path and also setting LIBPATH variable. The application has both 64 and 32 bit version of libraries example, example64 directories. LIBPATH="/opt/example/lib:/opt/example64/lib" is exported on both platforms. I did truss on both the machines to see how these loading done. On machine1: it works fine. it has kload call with empty LIBPATH kload("/opt/example/lib/libcapt.so", 17367680, "") = 648518346072921824 On machine2: fails to load library it has kload call with LIBPATH value kload("/opt/example/lib/libcapt.so", 17367680, "/opt/example/lib/:/opt/example64/lib//usr/lib") = 0 on this machine it is trying to load from /opt/example/lib 32 bit version and failing with bad magic number error. I would like to know why kload() is not getting LIBPATH in machine1 and why it is getting in machine2. This clearly looks specific to machine but I could not find what made the difference. On the terminal where I launch the application, LIBPATH="/opt/example/lib:/opt/example64/lib" is set for both platforms. Actually I am doing dlopen(), is this call internally calls kload() in AIX? -- Regards, Ravi Thati ...

Folks wanting to migrate AIX 5.3 ( with TCB Enabled) to AIX 6.1 and create WPAR
Greetings!!! Running AIX5.3 with TCB enabled and wanted to migrate to AIX6.1 to exploit AIX6.1 by creating WPAR was not possible. Here is a way to acheive that (if you are still on AIX5.3): 0. Modify PdAt for TCB_STATE (Make a copy of PdAt): i.e. odmget -q attribute=TCB_STATE PdAt | sed 's/tcb_enabled/ tcb_disabled/' | odmchange -o PdAt -q attribute=TCB_STATE 1. Migrate AIX5.3 to AIX6.1 Migration (Install) would pick up TCB_STATE and populate /usr/lpp/bos/ inst_root. 2. Create WPAR. Have not noticed any consequences, though testing was limited. -Khatir These are my person...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #6
Wasn't really the solution I came up with; but it worked. You might be correct since now the OpenSSL binaries will not build against the Kerberos libraries currently. libssl and libcrypto build fine along with everything else; but the actual openssl binary fails. Phil, Have you successfully linked OpenSSL with the new Kerberos libraries ? Thanks, Lamar -----Original Message----- From: Sam Hartman [mailto:hartmans@mit.edu] Sent: Friday, February 09, 2007 10:18 AM To: Saxon, Lamar Cc: pgp@psu.edu; kerberos@MIT.EDU Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Do you really wan...

FYI: AIX 6.1 Installation from a lower AIX version using NIM or NIMOL ( NIM on Linux )
AIX 6.1 Installation from a lower AIX version using NIM or NIMOL ( NIM on Linux ) *Introduction In case you need to install an AIX OS over the network you need normally a AIX machine at the same AIX level and a configured NIM environment or a linux machine serving NIM functions (NIMOL). NIMOL RPM Packages ( Fits also for aix 5.3 ) The AIX 6.1 base installation contains a directory ./RPMS/linux ( The 5.3 as well and about 5.2 i do not know ) This directory contains the files for a NIMOL installation - XML-LibXML-1.58-1.i386.rpm - libxml2-2.6.17-4.i586.rpm - nimol-1.0-4.noarch.rpm - osin...

Create a multiboot (AIX 4.3.3
Hi Gurus, We develop software on AIX. We have one system (43P 150). The software we support is in transition and we have to support both AIX 4.3.3.0 and AIX 5.1 for some time. I have one large hard disk (73 GB) and two small hard disks (9 GB each). Is it possible to create a multiple boot system? How would I do that? Can i have one part of the 73 GB HD in one boot and the other part in another boot? Thanks a lot in advance! PG .... have a look at alt_disk_install One of your 9gb-disks with AIX 4.3.3 and the other with 5.1 - now you can boot whatever os you want, only by change the bootlis...

AIX 6.1
Hi, Can someone provide me an URL to download AIX 6.1. Also, could you provide me supported PowerPC platforms of AIX 6.1. TIA, Prem On 06/24/2009 04:18 PM, Prem Sankar G wrote: > Hi, > Can someone provide me an URL to download AIX 6.1. Also, could you > provide me supported PowerPC platforms of AIX 6.1. > TIA, > Prem https://www14.software.ibm.com/iwm/web/cc/earlyprograms/ibm/aix6beta (small note: the beta program finished nearly 2 years ago) AIX 6.1 runs on systems based on POWER4™, PPC970, POWER5™ and the latest generation of POWER™ processor, POWER6. Niel On Jun 25, 2:18 am, Prem Sankar G <premsan...@gmail.com> wrote: > Hi, > Can someone provide me an URL to download AIX 6.1. Also, could you > provide me supported PowerPC platforms of AIX 6.1. > TIA, > Prem AIX is not OpenSource Henry schrieb: > On Jun 25, 2:18 am, Prem Sankar G <premsan...@gmail.com> wrote: > >>Hi, >> Can someone provide me an URL to download AIX 6.1. Also, could you >>provide me supported PowerPC platforms of AIX 6.1. >>TIA, >>Prem > > > AIX is not OpenSource but it could be "OpenBinary" :-) ...

AIX 4.1.5 for Clients vs. regular AIX 4.1.5
Hi, My IBM RS/6000 Notebook 860 portable workstation was originally packaged with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference with the regular 4.1.5? Many thanks, Emeric -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG Emeric Maschino wrote: > Hi, > > My IBM RS/6000 Notebook 860 portable workstation was originally packaged > with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference > with the regular 4.1.5? > > Many thanks, > > Emeric > > > -- > Posted via Mailgate.ORG Server - http://www.M...

Installing Python 2.7.5-1 on AIX 6.1
--_000_FA70DDD4F493F649A8974A9605B63DD47576E77DNPBREXMP01bcnem_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I have downloaded the "python-2.7.5-1.aix6.1.ppc.rpm" package from the IBM = Linux ToolBox site. When I try to install the python rpm package, it fails because it's looking= for (7) dependencies listed below. The dependencies listed do seem to exi= st on the server, and I have also successfully installed the openssl-0.9.8z= g package on the server. Has anyone successfully installed Python 2.7 on AIX, an...

tcl 8.6.4
Hi, Using 8.3.0, compiled on AIX 6.1 with no problems. It compiles with the xlc= compiler. But when I try to build tcl 8.6.4, I notice some changes. Configure uses xl= c_r rather than xlc. But the difference that causes a problem is setting TC= L_LIBRARY snd TCL_PACKAGE_PATH.tclUnixInit.c is the only file that uses the= se extra variables in make and I get the following errors. xlcwrapper_r -c -DNDEBUG -O -DBUILD_tcl -I"." -I/tmp/xxxxxx/tcl8.6.4/un= ix -I/tmp/xxxxxx/tcl8.6.4/generic -I/tmp/xxxxxx/tcl8.6.4/libtommath -DPACK= AGE_NAME=3D\"tcl\" -DPACKAGE_TARN...

Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
Hi All Need docmented notes of step by step installing NIM Server on AIX 5.1 Server. Send me also documented notes on installing the NIM client for Aix 5.2 & 5.1. You can send the docs to prsanwal@gmail.com mail account. Awaiting your quick response. Warm Regards Prateek S How about go search IBM's web site and use the man pages... then if you get stuck, come back here and ask for help... We're not here to do your job for you. seriously! jeez prateek... have a little tact man! you want us to find you a bunch of documentation and mail it to you? and quickly? come on dude... ...

XLF 6.1 on AIX 5.1. Can it be done? Libary issues.
Hi guys, I'm a newbie trying to learn AIX administration so I apologize if this is a dumb question. I got a used RS6000 and it has AIX 5.1. I have the original AIX 5.1 CDs. I also got an original unopened package of XLF 6.1. I used to use XLF 6.1 at work and I thought we were running it on AIX 5.1, but when I installed it on the RS6000 at home, I ran into trouble. The install was successful (although I did have to install bos.adt.libm from the AIX CD1, but I got that figured out). But when I try to compile/link something, it gives an error. The error says it could not load libxlf...

KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2
I was hoping someone might be able to help me fix an issue I have encountered. I tested KRB5 1.3.6 on AIX 5.2 using C for AIX and the installed make. Created a krb5.conf and krb5.keytab to talk to a Windows 2k AD Domain Controller. Had no issues, connected and received tickets fine. I recently installed KRB5 1.4 on the same machine after removing the 1.3.6 footprint. I encountered an issue seen by others with the error: "Syntax error at line 1 : `(' is not matched" when using AIX's make; but it seems to work fine using GNU Make. After compiling and doing a make instal...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted this message before, but no one seems to be able to help. I have successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the release of 1.5.1 and beyond, I am cannot get it to work. All of the versions seem to error out here: making all in lib/rpc/unit-test... Target "all" is up to date. cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL -DL ANL_ICN -qhalt=e -O -D_THREAD_SAFE ...

Mozilla 1.6 on AIX
Hello, I've been using Mozilla for over a year now..when I installed 1.6 for AIX 4.3.3, I run it and get the following message: nsNativeComponentLoader: GetFactory(libgfx_gtk.so) Load FAILED with error: A file or directory in the path name does not exist. nsNativeComponentLoader: GetFactory(libgfx_gtk.so) Load FAILED with error: A file or directory in the path name does not exist. nsNativeComponentLoader: GetFactory(libgfx_gtk.so) Load FAILED with error: A file or directory in the path name does not exist. nsNativeComponentLoader: GetFactory(libgfx_gtk.so) Load FAILED with error: A f...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin....

AIO on AIX 6.1
Hi, On AIX 6.1, smitty aio doen't how is managed AIO on AIX 6.1 ? Thanks in advance On May 5, 9:37=A0pm, "bob123" <bob...@gmail.com> wrote: > Hi, > > On AIX 6.1, smitty aio doen't > how is managed AIO on AIX 6.1 ? > A iNet search leads to http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=3D/com.ibm= ..aix.prftungd/doc/prftungd/async_io.htm and the ioo command cheers Hajo bob123 wrote: > On AIX 6.1, smitty aio doen't > how is managed AIO on AIX 6.1 ? It's all automagic now. You don't have to configure it like you...

RBAC in AIX 6.1
Hello all I have one remaining question regarding RBAC since we will start migrating to AIX 6.1 in Q4 of 2008. Since we are using LDAP users, does this mean that whenever you give a role to an LDAP user, the LDAP user gets the role for all AIX 6.1 LPARS? What I am currently searching for is a replacement for SUDO, which allows you to grant access to command A on node X but not on node Y. So my question is, is this granularity possible with RBAC in AIX 6.1, giving f.e. the FSChange role to LDAP user X where user X can do FSChange related commands on node A but node on node B? Thanks a lot! ...

jruby 1.6 on AIX
[Note: parts of this message were removed to make it a legal post.] Today I download jruby 1.6. I actually downloaded the source code and the binary version. I thought that the binary version only requires that certain files be placed on a specific location. I also did not find installation instructions. The README file briefly talks about building jruby with *ant*. Where can I find instructions that can tell me where to place the binary that I downloaded? Thank you -- Ruby Student Hi, did you take a look at that page ? http://kenai.com/projects/jruby/pages/GettingSt...

KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 (fwd)
I have done some research on this problem. The host resolve code does not complete successfully. I have traced the error to the routine at /kerberos/mit/krb5-1.4/src/lib/krb5/os/dnsglue.c. In the routine a call is made to res_ninit to provide dns information for the kdc. res_ninit updates the structure at statbuf but overlays memory 72 bytes past the structure boundary. I have opened a problem with IBM on res_ninit. The problem is not yet resolved but IBM suggested using a malloc for the structure instead of static storage. I am trying to get IBM to correct the error in res_ninit...

AIX 6.1 automount ?
hello world, I'm loading a shiny new P6 server with AIX 6.1. Went fine so far, but now it seems the automounter hangs. I copied functional /etc/auto* files over to the new machine, but it seems automount hangs even before it looks at those files, when I'm trying to start it manually: # /usr/sbin/automount -m -v -f /etc/foo.bar automount: Using automount master map as file /etc/foo.bar it doesn't even complain about the non-existing file, just waits forever. ??? On Jun 15, 11:04 pm, Michael Kraemer <M.Krae...@gsi.de> wrote: > hello world, > > I'm loading a ...

Web resources about - AIX 6.1 kload() - comp.unix.aix

Interview Exclusive: Joe Rogan Explains Everything, Part II
In this three part interview exclusive, UFC color commentator, Joe Rogan, discusses his hit SyFy show, UFC weight classes, commentary favorites, ...

Matthew Fox: ‘I have never hit a woman before. Never have, never will.’
... of Oregon will allow for first-time offenders, I did my four Sundays of group informational treatment, and who know what? I learned a f—kload ...

DLL-files starting with k - DLL-files.com
Online since 1998 How to install DLL files Upload DLL files Fixer Help Forum Request-a-file Buy Fixer DLL-files starting with k Choose the first ...

Read User Reviews and Submit your own for London Zoo - Metacritic
... Kevin Martin as The Bug. An absolute masterpiece. The songs are innovative and interesting, but most of all, they contain a whole f**kload of ...

Info for "FrontPage" - FreeBSD Wiki
Search: Login Info for "FrontPage" RecentChanges FindPage HelpContents FrontPage Immutable Page Comments Info Attachments More Actions: Raw Text ...

YunoHost • packaging_apps
... "description": { "en": "Open Source Webmail software", "fr": "Webmail Open Source" }, "license": "GPL-3", "developer": { "name": "kload", "email": ...

Resources last updated: 3/7/2016 12:41:13 AM