f



GnuPG 1.2.4 make error in AIX 4.3.3

I have tried building gpg 1.2.4 from source and I get an error.  For
the first make error, I found a patch for util/secmem.c, so the make
goes farther, but now I have a new error message, which I have posted
below.  I did find a VERY complicated patch for this specific error,
but it was for an older version of source, like 1.0.6 or something,
and I felt I shouldn't mix up versions.  I have also tried two
binaries from www.bullfreeware.com and get errors about "Symbol
strsep".  Any specific advice will be greatly appreciated.

Making all in checks
        ./gpg_dearmor > ./plain-1 < ./plain-1o.asc
gpg: can't lock memory: Operation not permitted.
make: 1254-004 The error code from the last command is 2.


Stop.
make: 1254-004 The error code from the last command is 1.


Stop.
make: 1254-004 The error code from the last command is 2.


Stop.
#
0
7/30/2004 5:25:58 PM
comp.unix.aix 10963 articles. 1 followers. drkirkby (98) is leader. Post Follow

0 Replies
627 Views

Similar Articles

[PageSpeed] 56

Reply:

Similar Artilces:

Does "AIX 4.2 and AIX 4.3.3" include 4.3.2?
Okay, I have HBA driver docs and their supported environment section states: "The supported operating systems are AIX 4.2 and AIX 4.3.3" Does this include my S7A running: # oslevel 4.3.2.0 Why 4.2 and 4.3.3 and not 4.3.2? Daryl gprimerib wrote: > Okay, I have HBA driver docs and their supported environment section > states: > > "The supported operating systems are AIX 4.2 and AIX 4.3.3" > > Does this include my S7A running: > > # oslevel > 4.3.2.0 > > Why 4.2 and 4.3.3 and not 4.3.2? Because 4.3.3 contains updates/features/fixes that don't exist in 4.3.2, and the driver requires them. I.e. that OS level is a requisite; your current level doesn't meet that requisite. Also keep in mind that AIX dev deals with parallel releases; updates often happen to more than one release simultaneously. AIX releases are not serialized. Today we support 5.1, 5.2 and 5.3, e.g. -- Gary R. Hook ________________________________________________________________________ Vocatus atque non vocatus deus aderit ...

Updates to sysback 4.2.1.4 on AIX 4.3.3?
Having had a mksysb transfer of a system fail I need to build a 4.3.3 from the ground up on a p660 with a number of software products installed. I have a licensed and installed copy of sysback.rte 4.2.1.4 installed on the "new" box but have issues with this. IBM, sometime in since the release of this software image more than four years ago appear to have superceeded the product with Tivoli storage manager, which sysback became a module of. I am trying to find a sysback.rte 4.2.1.35 or later (preferably later). Can anyone provide a link to a suitable update? TIA Ian On 28 Jul 2005 07:35:55 -0700, "Ian Barlow" <anon34543@yahoo.com> wrote: >Having had a mksysb transfer of a system fail I need to build a 4.3.3 >from the ground up on a p660 with a number of software products >installed. > >I have a licensed and installed copy of sysback.rte 4.2.1.4 installed >on the "new" box but have issues with this. IBM, sometime in since the >release of this software image more than four years ago appear to have >superceeded the product with Tivoli storage manager, which sysback >became a module of. I am trying to find a sysback.rte 4.2.1.35 or >later (preferably later). Can anyone provide a link to a suitable >update? > >TIA >Ian You want to look at www.storix.com the original authors of sysback and once IBM went Tivoli, these guys took the product back themselves. It's cost is less expensive than I...

Newbie question; why (cons (list 1 2) (list 3 4)) is ((1 2) 3 4) and not ((1 2) (3 4))
Hi, I just started to learn LISP, and stumbled in SICP upon (cons (list 1 2) (list 3 4)) is evaluated to ((1 2) 3 4) I do not understand why this is not: ((1 2) (3 4)) because (cdr (cons (list 1 2) (list 3 4))) is (3 4) and (car (cons (list 1 2) (list 3 4))) is (1 2) Is there a logical explanation? Thank you for your patience. -- Greg Out of order, gregor <gregor@ediwo.com> writes: > Is there a logical explanation? Yes. > I just started to learn LISP, and stumbled in SICP upon But first, let's talk about LISP, Lisp, Scheme and Common Lisp. LISP is the name of the programming language invented in 1959 by John McCarthy and of the first program implementing it written amongst other by Steve Russel, one of his students. LISP 1.5 is a segueing version of that same program dating about 1962 that had some distribution. Then various lisp languages were developed at various places by various teams. Names such as MacLisp, InterLisp, LeLisp, StandardLisp, vLisp, Lisp Machine Lisp, Scheme, GNU Emacs Lisp, etc. It was quite a mess, and people had a hard time sharing programs. So they talked and designed and wrote and voted and produced the ANSI Common Lisp standard (in the USA), meanwhile in Europe they produced the ISO Lisp standard. Nowadays, almost all the other lisps are "dead", with only scheme (current version r5rs, r7r...

Ruby 1.8.3 Build error on AIX 5.2 with gcc 3.4.4
Hello, I've found errors on AIX 5.2 with gcc 3.4.4 : -A) Configuration errors : -1) Bind error in ext/bigdecimal because the file ruby.imp doesn't exist. In the main Makefile, $(RBCONFIG) target needs $(ARCHFILE). You can have the line : $(RBCONFIG): $(srcdir)/mkconfig.rb config.status $(PREP) $(ARCHFILE) -B) Compiler errors : -1) ext/readline.c line 13 : <unistd.h> includes some 64 bits features if the configuration program set the macro __LARGE_FILES. So, if you don't use 64 bits file acces you have to add "#undef __LARGE_FILES" in line 13 just be...

Apache 2.0.48+Php 4.3.4+Aix 4.3.3
Hello. I'm trying to compile this version of apache with php support on Aix 4.3.3ML11. I use gcc 3.2.1 compiler and all seems to go right. But when i try to access to a php page apache shows segmentation fault and doesn't answer. Any idea ? Thanks. ...

Apache 2.0.48+php 4.3.4+Aix 4.3.3
Hello. I'm trying to compile this version of apache with php support on Aix 4.3.3ML11. I use gcc 3.2.1 compiler and all seems to go right. But when i try to access to a php page apache shows segmentation fault and doesn't answer. Any idea ? Thanks. > Hello. > I'm trying to compile this version of apache with php support on Aix > 4.3.3ML11. > I use gcc 3.2.1 compiler and all seems to go right. > But when i try to access to a php page apache shows segmentation fault and > doesn't answer. > > Any idea ? Does Apache also segfaults wh...

Will AIX 4330-11 ML update an AIX 4.3.1.0 installation to 4.3.3 ML 11?
Hi All, Would like to bring my 4.2.1 system to 4.3.3 prior to doing an alt_disk_install for 5L version 5.1. However, what I have is the 4.3.1 install CDs. Once I update/migrate to 4.3.1, will applying the AIX 4300-11 maintenance package update the system to the latest AIX 4.3.3 level? Thanks, Mark I don't know for sure, but almost certainly not. I think you need kosher 4.3.3 CDs. Iain http://www.axiomtech.co.uk On 1 Aug 2005 06:00:46 -0700, iain@cairnlin.co.uk wrote: >I don't know for sure, but almost certainly not. I think you need >kosher 4.3.3 CDs. > >Iain >http://www.axiomtech.co.uk Thanks. That's what I thought. Still digging for them. lol. Mark On Mon, 01 Aug 2005 20:46:26 -0700, Mark Masters <FakeEmail@yahoo.com> wrote: >On 1 Aug 2005 06:00:46 -0700, iain@cairnlin.co.uk wrote: > >>I don't know for sure, but almost certainly not. I think you need >>kosher 4.3.3 CDs. >> >>Iain >>http://www.axiomtech.co.uk > >Thanks. That's what I thought. Still digging for them. lol. >Mark Phew. Found them finally. Now I can install my man pages since I couldn't find the documentation CDs for our 4.2.1. lol ...

AIX 4.3.3. install reverts to 4.3.2 ???
Hi After doing a fresh install of AIX 4.3.3, oslevel actually reports the version as 4.3.3 . After loading some of the prereqs for C for AIX 6, oslevel reports the version as 4.3.2 . Has anyone ran into this? Thanks, Jeffrey After a little more searching I found the there is a PTF file to address this problem. thanks On Wed, 24 Dec 2003 02:23:24 -0500, Jeff Christensen <jeffreyc@sympatico.ca> wrote: >Hi > > After doing a fresh install of AIX 4.3.3, oslevel actually >reports the version as 4.3.3 . After loading some of the prereqs for >C for AIX 6, osle...

JDK 1.4 on AIX 4.3.3
Hi, is JDK 1.4 (1.4.2) compatible (installable) on AIX 4.3.3? According to SMIT/install_all it requires bos.rte 5.1.x.x, among other filesets, which are part of AIX V5: FAILURES -------- Filesets listed in this section failed pre-installation verification and will not be installed. Requisite Failures ------------------ SELECTED FILESETS: The following is a list of filesets that you asked to install. They cannot be installed until all of their requisite filesets are also installed. See subsequent lists for details of requisites. Java14.ext.commapi 1.4.2.0 # Java SDK 32-bit Comm API Ext... Java14.ext.java3d 1.4.2.0 # Java SDK 32-bit Java3D Java14.ext.javahelp 1.4.2.0 # Java SDK 32-bit JavaHelp Java14.license 1.4.2.0 # Java SDK 32-bit License Java14.sdk 1.4.2.0 # Java SDK 32-bit MISSING REQUISITES: The following filesets are required by one or more of the selected filesets listed above. They are not currently installed and could not be found on the installation media. OpenGL.OpenGL_X.rte.base 5.1.0.50 # Fileset Update OpenGL.OpenGL_X.rte.soft 5.1.0.50 # Fileset Update bos.net.tcp.client 5.1.0.50 # Fileset Update bos.rte 5.1.0.50 # Fileset Update bos.rte.libc 5.1.0.50 # Fileset Update bos.rte.libpthreads 5.1.0.50 # Fileset Update << End of Failure Section >> Regards, Damir no, you can't install 1.4.2 on 4.3.3. ...

Java 1.4 on AIX 4.3.3
Hi, I have over 100 customers on AIX 4.3.3, and my Java software requires Java 1.4. All of my other supported software platform (HPUX, Linux and even SCO) support Java 1.4. Does anyone know how to get Java 1.4 for AIX 4.3? I guess the alternative is, for those customers whose hardware won't support AIX 5 (most of them), it to get them off of AIX onto Linux. It seems ridiculous that 4.3 can't support Java 1.4. Cheers, Ian. Ian wrote: > I have over 100 customers on AIX 4.3.3, and my Java software requires > Java 1.4. > All of my other supported software platform (HPUX, Lin...

Java JDK 1.4 and AIX 4.3.3
Is there a version of java 1.4 for AIX 4.3.3 anywhere? JL Java 1.1.8 requires AIX 4.2.1 Java 1.2.2 requires AIX 4.3.3 PLUS fixes Java 1.3.0 requires AIX 4.3.3.10 PLUS fixes Java 1.3.1 64-bit requires AIX 5.1.0.10 Java 1.3.1 requires AIX 4.3.3.75 Java 1.4 64-bit requires at least AIX 5.1.0.75 or AIX 5.2.0.10 Java 1.4 requires at least AIX 5.1.0.75 or AIX 5.2.0.10 ...

Is there a g++ 3.4.3 (or better) binary available for AIX 4.3.3 ?
Have tried compiling gcc/g++ 3.4.3 from the UCLA Web site but after resolving several problems got stuck in building libstdc++.a: Assembler: /tmp//ccYxSLZd.s: line 4674: .set operand undefined or forward reference /tmp//ccYxSLZd.s: line 4675: .set operand undefined or forward reference /tmp//ccYxSLZd.s: line 4705: .set operand undefined or forward reference Any suggestions? TIA Jeffrey j3 wrote: > Have tried compiling gcc/g++ 3.4.3 from the UCLA Web site but after > resolving several problems got stuck in building libstdc++.a: > Assembler: > /tmp//ccYxSLZd.s: line 4674: .set operand undefined or forward Try it with the other assembler; I mean try with 'gas' if you used the default AIX 'as', or vice versa ...

Binaries for Tomcat 4.1.27 on AIX 4.3.3
If someone has ever compiled tomcat and connector to apache 2.0.44 or 45 for AIX 4.33, or saw a link to. I should be very pleased he send me that link .. thanks for all J�r�me ...

FW: IDS Migration from AIX 4.3.3 to AIX 5.2
Trying to send again. Steve Brown -----Original Message----- From: Brown, Steve L [ITS] Sent: Tuesday, February 24, 2004 8:31 AM To: 'TBP' Subject: RE: IDS Migration from AIX 4.3.3 to AIX 5.2 We fought this for over a month last year. We went from some RS6000 running 2 500 mHZ cpu's to a P630 running 4 1 gig cpu's. We went from 4.3.3 on the old boxes to 5.2 on the new machines and had many problem trying to get Informix to behave. IBM, after many weeks of trying and failing, had us change from 64 bit kernel to a 32 bit kernel. That helped a lot, but still had problems with Informix. They then made us change from "shared memory" to tcp connections. IBM said the problem was that the "Regatta" boxes are too fast to use "shared memory". Things settled down and we went into production. But last year has been horrible with our app. We lost performance. We run ton's of big stored procedures and choke the boxes pretty often. They finally closed all our open ticket in favor of upgrading to the next relase and see how it goes. We're going to upgrade next month. I forgot the next version number. The gut feel is that Informix ran better under 4.3 with the 2 500 mHZ cpu's. Steve Brown -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of TBP Sent: Tuesday, February 24, 2004 4:58 AM To: informix-list@iiug.org Subject: Re: I...

[0 0 1 1 2 2 3 3 4 4 ... n n]
Is there a way to achieve a vector like the one below without using loops? [0 0 1 1 2 2 3 3 4 4 ... n n] "Ulrik Nash" <uwn@sam.sdu.dk> wrote in message <kp999d$a8e$1@newscl01ah.mathworks.com>... > Is there a way to achieve a vector like the one below without using loops? > > [0 0 1 1 2 2 3 3 4 4 ... n n] You could try this: floor(0:1/rep:n+1-1/rep) where rep is the number of repetitions (2 in your case) Hi, a cool way to do that is using the kronecker product kron(0:n,[1 1]); "Ulrik Nash" <uwn@sam.sdu.dk> wrote in message <kp999d$a8e$1@newscl01ah.mathworks.com>... > Is there a way to achieve a vector like the one below without using loops? > > [0 0 1 1 2 2 3 3 4 4 ... n n] There is another way to achieve that. Do this like the following: >> n=7; u(1:2:2*n+1)=0:n; >> u(2:2:2*n+2)=0:n; The array u seems to be what you want. ...

Oracle 7.3.4 performance issues on AIX 4.3.2
Hi Guys, We are using AIX4.3.2 with Oracle 7.3.4 on F50 configured Paging space is 512MB with 40% max utilization. Database is installed on SSA RAID box(hdisk1) where we have configured RAID5. I have noticed immense performance issues with server in peak hrs, as per my observation before we / user execute any search query on database system performs in reasonable condition ASA we execute any search query server encounter extreme bottleneck issues Below I have given output of sar vmstat and iostat commands before executing search query and after executing search query, please advice how can we overcome this issue, required indexes are already available in oracle. Server performance before user execute any query on database. %usr %sys %wio %idle Sar Average 26 5 4 65 C/ >vmstat 1 10 kthr memory page faults cpu ----- ----------- ------------------------ ------------ ----------- r b avm fre re pi po fr sr cy in sy cs us sy id wa 1 1 68531 2043 0 1 1 75 228 0 250 1973 397 37 11 45 7 1 1 68531 2038 0 0 0 0 0 0 227 5586 202 27 7 61 5 1 1 68531 2038 0 0 0 0 0 0 209 5682 156 26 6 68 0 1 1 68531 2036 0 0 0 0 0 0 225 4890 324 39 6 50 5 1 1 68531 2036 0 0 0 0 0 0 207 5589 153 23 6 71 0 0 1 68531 2036 0 0 0 0 0 0 207 5310 145 25 4 71 0 0 1 68531 2036 0 0 0 0 0 0 212 5323 1...

Firefox 1.5.0.4 on AIX 4.3.3 available
the builds of Firefox 1.5.0.4 are available for Common, PowerPC 604, PowerPC 601 and POWER target machines. "http://www.linkitup.de/ForAIX/Firefox" Should work on AIX 5 too, but not tested. Build exactly the same way as the previous release which did fine on AIX 5.1 ML9. And Mozilla 1.7.13 "http://www.linkitup.de/ForAIX/Mozilla" I have target CPU optimizied build of Mozilla for PPC601 and POWER too, but only limited webspace. Feel free to ask if you're interested in a little more speed for your ancient machine. -- Uli Link Hi! If you are still looking for people to mirror this, I'll be updating mine shortly. I think I missed your compliation of the FF 1.5 release entirely because I was so busy. If there's something you need to have hosted, let me know. William ...

Compile C on AIX 5.3 and run on AIX 4.3.3
We are running AIX 5.3 (64 bit kernal). We develop using the IBM XL C compiler version 7. For one site we need to run on AIX 4.3.3. Can we compile on AIX 5.3 and run on AIX 4.3.3? Loial wrote: > For one site we need to run on AIX 4.3.3. Can we compile on AIX 5.3 > and run on AIX 4.3.3? No. The general rule is that you compile and build on the earliest level you need to support. Is it not possible to set compiler options to generate code that will run on AIX 4.3.3? On 13 Feb, 15:11, "Gary R. Hook" <n...@nospammers.net> wrote: > Loial wrote: > > For one site we need to run on AIX 4.3.3. Can we compile on AIX 5.3 > > and run on AIX 4.3.3? > > No. The general rule is that you compile and build on the earliest > level you need to support. On Feb 14, 8:22 am, "Loial" <a...@loial.co.uk> wrote: > Is it not possible to set compiler options to generate code that will > run on AIX 4.3.3? No, not at all ... ref: http://www-03.ibm.com/servers/aix/os/ compatibility/ HTH Mark Taylor On Feb 13, 7:24 pm, "Loial" <a...@loial.co.uk> wrote: > We are running AIX 5.3 (64 bit kernal). We develop using the IBM XL C > compiler version 7. > > For one site we need to run on AIX 4.3.3. Can we compile on AIX 5.3 > and run on AIX 4.3.3? It is possible to compile on a later version and run it on a previous version. But you must be really really lucky - I repeat, really lucky, if you see your ...

enscript problem on upgrade from AIX 4.3.3 to AIX 5.3
Did an upgrade yesterday from AIX 4.3.3 to AIX 5.3. We have some old code that uses the enscript command and now we are getting a banner page between each enscript command which we weren't getting under AIX 4.3.3. I can't find anything in the documentation about shutting off this banner page. Can anyone tell how, or if it's even possible, to shut off the banner page with enscript. Thx. Marv ...

AIX 4.3.3 , Oracle 7.3.4 coredumps at startup
I need to move an Oracle 7.3.4 database and application from an old AIX 4.2.1 J40 machine to a newer p660 box that is running 4.3.3 of AIX. I cannot port the database to Oracle 8 or later since the app progs are closed-source (was written in cobol), the vendor is not around anymore, and they used variable names imbedded in the sql of the apps that are now reserved words in Oracle 8 and later. I installed the Oracle 7.3.4 from cdrom onto the new machine, did a clone-style copy of the database filles over but the instant you run svrmgrl and try to do a "startup nomount" to get ready to...

Funny error in "make bootstrap" of GCC 4.1.1 on AIX 5.3
I am getting the following error building GCC 4.1.1 on AIX 5.3 on a 44P-170 using GCC 3.3.2 that comes on the latest toolkit CD. I first looked in the mkfixinc.sh script for a rogue > but didn't find it. I am running everything under the bash shell by executing /usr/local/bin/bash after logging in normally. Logged in as root: gcc -g -O2 -o fixincl fixincl.o fixtests.o fixfixes.o server.o procopen.o fixlib.o fixopts.o ../libiberty/libiberty.a echo timestamp > full-stamp srcdir="../../../gcc-4.1.1/fixincludes" /bin/sh .../../../gcc-4.1.1/fixincludes/mkfixinc.sh powerpc-ibm-aix5.3.0.0 sed -e 's/@gcc_version@//' < > mkheadersT /bin/sh: 0403-057 Syntax error at line 1 : `>' is not expected. make: 1254-004 The error code from the last command is 2. Stop. make: 1254-004 The error code from the last command is 2. Stop. As always, thank you in advance! AIX n00b wrote: > I am getting the following error building GCC 4.1.1 on AIX 5.3 on a > 44P-170 using GCC 3.3.2 that comes on the latest toolkit CD. I first > looked in the mkfixinc.sh script for a rogue > but didn't find it. I am > running everything under the bash shell by executing /usr/local/bin/bash > after logging in normally. Logged in as root: > > > gcc -g -O2 -o fixincl fixincl.o fixtests.o fixfixes.o server.o > procopen.o fixlib.o fixopts.o ../libiberty/libiberty.a > echo timestamp &g...

aix-get for AIX 4.3.3
I've visited http://sourceforge.net/projects/aix-get, but I haven't seen a version for AIX 4. Does anybody know a version of aix-get to AIX 4.3.3? Thank you in advance! from the sourceforge description "This program allows you automatically check for updates for AIX 5L packages and rpms and download and/or install them. It is a replacement for well-known `fixdist` in AIX4." So use fixdist. Or, download the v5 version and hack the perl code to make it 433 specific. Rgds Mark Taylor -- Posted via http://dbforums.com Mark Taylor <member20596@dbforums.com&g...

ANN: Openstep for Zaurus: mySTEP-1.4, myPDA-3.1a5 ANN: Openstep for Zaurus: mySTEP-1.3, myPDA-3.1a4, Zaurus-gcc-2.95.3X10.3a1 ANN: Openstep for Zaurus: mySTEP-1.4, myPDA-3.1a5
Dear all, again new releases for the GNUstep clone "mySTEP" for the Sharp Zaurus and its runtime environment "myPDA" (X11 + window manager) as well as an update for the gcc cross-compiler development kit hosted on MacOS X 10.3 are available. The system is becoming more and more mature - although it is not yet ripe enough for productivity. It allows you to take the source of Cocoa applications, add a simple shell-script build phase, and compile into a "fat binary" .app bundle that runs verbatim on MacOS X as well as on a standard Zaurus on which myPDA is...

power2 model 590 / AIX 5.1 and 43P-150/ AIX 4.3.3
Does anyone know whether it is possible to run AIX 5.1 on Power2 Model 590 ? or to run AIX 4.3.3 on 43P-150? I am new to AIX, I would appreciate if anyone can point me to the support matrix from IBM. thanks anna schrieb: > Does anyone know whether it is possible to run AIX 5.1 on Power2 Model > 590 ? or to run AIX 4.3.3 on 43P-150? > Both works. -- Uli (Reply to ulrich <dot> link <domain-delimiter> epost <dot> de) Uli Link wrote: > anna schrieb: > >> Does anyone know whether it is possible to run AIX 5.1 on Power2 Model >> 590 ? or to run AIX 4.3.3 on 43P-150? >> > > Both works. But that's the last release that will work on that machine. Starting with 5.2, only CHRP models are supported (which means hardware that is much more current). -- Gary R. Hook / AIX PartnerWorld for Developers / These opinions are MINE ________________________________________________________________________ >>> Does anyone know whether it is possible to run AIX 5.1 on Power2 Model >>> 590 ? or to run AIX 4.3.3 on 43P-150? >>> >> >> Both works. > > > But that's the last release that will work on that machine. Starting > with 5.2, only CHRP models are supported (which means hardware that > is much more current). > The 7043-150 is a CHRP machine and will run 5.2 but not with 64bit kernel. AFAIR the minimum is AIX 4.2.1 with additional drivers. The 590 is a ...

Web resources about - GnuPG 1.2.4 make error in AIX 4.3.3 - comp.unix.aix

GnuPG - Flickr - Photo Sharing!
I'm using a GnuPG encrypted message as pixel matrix.

Once-starving GnuPG crypto project gets a windfall. Now comes the hard part
For almost two decades, the open source GnuPG encryption project has teetered on the brink of insolvency. Now, following word of that plight, ...

Gnupg Articles on Engadget
Gnupg articles, stories, news and information.

Funds flow in for GnuPG author after article reveals his plight
... published the frustrating tale of Werner Koch, the one guy – yes really – who’s maintaining the extremely widely-used Gnu Privacy Guard (GnuPG ...

Manipulated messages despite GnuPG
A number of email clients do not work properly with the interface of the Open Source encryption program GnuPG, allowing text to be added subsequently ...


GnuPG author set to bolster operation after donation drive
​The author of the popular free email encryption software used by whistleblower Edward Snowden has finally received a six-figure pay day after ...

Gnupg needs your support!
Gnu Privacy Guard (GPG, the free/open version of PGP) relies on donations to pay developers to keep the project alive and viable; as one of its ...

Secure your files: An introduction to GnuPG
GnuPG allows you to encrypt data so only the intended recipient, with a key and a password, can decrypt it. It also provides a mechanism for ...

Pretty Good Privacy - Wikipedia, the free encyclopedia
Pretty Good Privacy ( PGP ) is a data encryption and decryption computer program that provides cryptographic privacy and authentication for data ...

Resources last updated: 3/26/2016 10:57:47 PM