f



Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 #2

Hi,

I am searching for information on installing TOMCAT 4.1 (or higher) on
AIX 5.1/5.2 platform.
Is it possible?

Regards

0
tomapam (28)
6/21/2005 2:01:51 PM
comp.unix.aix 10963 articles. 1 followers. drkirkby (98) is leader. Post Follow

0 Replies
935 Views

Similar Articles

[PageSpeed] 15

Reply:

Similar Artilces:

Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2
Hi, I am searching for information on installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 platform. Is it possible? Regards Yes, it works. Follow the installation instruction on tomcat web site. You might have issues with running stanalone Tomcat/SSL server on AIX due to the conflicts in JDK implementations used on AIX and the one to develop Tomcat ( Sun and IBM aren't play nice in there )... Other than that -- works just fine. Thx a lot for your reply. Can Tomcat use AIX's Java platform ? Is it mandatory to install SUN's JDK on AIX ? In this last case, would you please tell me where I can download sun's jdk for AIX. Thx again, Best Regards Yes, tomcat will use AIX JDK with no problem... till you decided to use Tomcat/SSL as stanalone server ( so, no other HTTP servers out there )... See how-to SSL on tomcat web site for more details. Begining with Java 1.4.1 Sun finaly get JSSE included in the release, but IBM did it few years ago in their JDK on AIX, so you will not find Sun JSSE on AIX platform in Java 1.4.x, but Tomcat/SSL needs it... I don't know it would be resolved any time soon. So, if you can use Tomcat without SSL or have Apache/SSL/Tomcat you should be just fine . Thank you very much for these details. Regards Ok, I've installed jakarta-tomcat-4.1.31.tar.gz on a AIX 5.2 system. I've created a 'tomcat' user and added the following information to his ..profile : export JAVA_HOME=/usr/java14 export CLASSPATH=/usr/j...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes: Grant,> I have seen several emails from different people over the Grant,> last few months on trying to get KRB5 1.5 or later to Grant,> compile on AIX 5.x. And no responses that fix the Grant,> problem. I have had the same problem and can only presume Grant,> that Kerberos is no longer supported on AIX. Is this the Grant,> case? No Kerberos on AIX? It just won't compile anymore Grant,> with the changes to shared libraries. We no longer run AIX tests. Our donated AIX box was very old and slow, and its disk was in the process of dieing. If there's no one out there in the Kerberos development community who cares enough about AIX to get the betas, test them and send bug fixes, then yes, AIX support is going to be fairly bad. Kerberos is an open-source product; if you want it to work better on your pl...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
Hi All Need docmented notes of step by step installing NIM Server on AIX 5.1 Server. Send me also documented notes on installing the NIM client for Aix 5.2 & 5.1. You can send the docs to prsanwal@gmail.com mail account. Awaiting your quick response. Warm Regards Prateek S How about go search IBM's web site and use the man pages... then if you get stuck, come back here and ask for help... We're not here to do your job for you. seriously! jeez prateek... have a little tact man! you want us to find you a bunch of documentation and mail it to you? and quickly? come on dude... show a little initiative... at least TRY to figure it out by yourself first, and evidence that by posting what you have tried and what happened. i know man pages suck ass (it honestly seems sometimes like they're TRYing to be vague and indirect sometimes). and i know ibm's website is ridiculously, monumentaly unorganized. but shit man, have you have heard of google? or askjeeves? i just searched for "installing NIM server on AIX" on google and found like 12,000 results! i know you come from a different culture where people may act a bit more... direct... in the workplace, but when you post a post like that, where you obviously havent even tried to find out yourself, you want people to find you documentation and EMAIL it to you, and you tell them to be QUICK? shit dude... not really how it works around here. btw- no one can see your email address in case you didnt know...

[ace-users] Tests failed : ACE 5.5.2 - AIX 5.3
Hi, My first mail before my message in the group failed (my subscription was not activated). The PRF below describes my problems. I can compile and link but several ACE's tests fail. I only use ACE library and only compile it by cd'ing in the ace directory before running make. I already made some fixes described below to compile and to link the library. I'm not abble to interpret the faild tests to identify the problem source or area. I didn't find the scoreboard before my mail. I see that several tests fails for all compilations on AIX. I try to reassure myself by looking these results, it's not only for my configuration. But it's a daily build with last development version. For the 5.5.2 stable version they should probably not fail ? Regards, PO Houot. ACE VERSION: 5.5.2 HOST MACHINE and OPERATING SYSTEM: bash-3.00$ uname -a AIX localhost 3 5 0040983B4C00 unknown unknown AIX bash-3.00$ oslevel -r 5300-05 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: Same as host COMPILER NAME AND VERSION (AND PATCHLEVEL): bash-3.00$ g++ -v Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 This compiler is installed from packages provided by UCLA AIX Software library THE $ACE_ROOT/ace/config.h FILE : bash-3.00$ more $ACE_ROOT/ace/config.h #include "ace/config-aix-5.x.h" T...

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

moving xlc 5.0.1 on aix 4.3 to aix 5.2?
We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. I remember reading xlc 5.0.2 is required to be used for AIX 5.2. Does this mean we have to purchase a new compiler, or is there an upgrade available. thank you sol sol gongola wrote: > We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 > We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. > > I remember reading xlc 5.0.2 is required to be used for > AIX 5.2. Does this mean we have to purchase a new > compiler, or is there an upgrade available. Just install updates....

AIX 4.1.5 for Clients vs. regular AIX 4.1.5
Hi, My IBM RS/6000 Notebook 860 portable workstation was originally packaged with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference with the regular 4.1.5? Many thanks, Emeric -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG Emeric Maschino wrote: > Hi, > > My IBM RS/6000 Notebook 860 portable workstation was originally packaged > with IBM AIX Version 4.1.5 for Clients. Does anybody know the difference > with the regular 4.1.5? > > Many thanks, > > Emeric > > > -- > Posted via Mailgate.ORG Server - http://www.Mailgate.ORG can't remember for sure, I also had an Aix portable I seem to recall the difference being it lacked some server daemons, required less disk space and less memory than the "Server" versions. I think the early days of 4.2 also had a "clients" and "server" editions. Here is a link to additional info on your machine: http://www.nand.net/~rjhawkin/ppc850tp/IBM_Offering_for_860.html ...

RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 #2
Downloaded KRB5 1.4.1 and the installation worked great with GCC and AIX make. None of the problems that were encountered with 1.4.0 and the unbalanced "(". The problem with: /usr/local/kerberos/bin/kinit -V kinit(v5): Cannot resolve network address for KDC in requested realm while getting initial credentials still exist. If I force it to version 4 KRB it seems to work with the krb5.conf: /usr/local/kerberos/bin/kinit -4 xxxxxxx Password for xxxxxx@xxx.xxxxxxxxxx.xxx: kinit(v4): Can't send request (send_to_kdc) The krb5.conf file is the same file that worked with the 1.3.6 version of KRB5. It does not seem to work with KRB 1.4 or 1.4.1. Any one having similar problems or solutions ? Thanks, Lamar -----Original Message----- From: Saxon, Lamar Sent: Monday, April 25, 2005 11:08 AM To: 'Tom Yu' Cc: kerberos@mit.edu Subject: RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 The compile with CC works with no issues. The other issue still remains. "Cannot resolve network address for KDC in requested realm while getting initial credentials" I tried kinit with the -k and verbose; but not with a password. I will post the results once I get it accomplished. Thanks, Lamar -----Original Message----- From: Tom Yu [mailto:tlyu@MIT.EDU] Sent: Thursday, April 21, 2005 2:18 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 >>>>> "Lamar" == <Lamar.Saxon@americredit.com> writes: La...

Installing AIX 5.1, 5.2 and 5.3 on a single server
Hi all, Is there any way to install different versions of AIX (from 5.1 to 5.3) on a single server? And to make them work simultaneously? I heard of LPAR but I am not sure it is possible to do such a thing with this feature... Thx for your help in advance. Regards The_Nail wrote: > Hi all, > > Is there any way to install different versions of AIX (from 5.1 to > 5.3) on a single server? And to make them work simultaneously? > I heard of LPAR but I am not sure it is possible to do such a thing > with this feature... > > > Thx for your help in advance. > Regar...

Looking for AIX 4.1.2 -> 4.1.5
Hi, Does anyone have AIX version between 4.1.2 - 4.1.5 for sale? I am looking for these versions because I intend to install it onto PowerPC thinkpad and these versions should be comaptible with it. You can contact me at tero.kaarlela at kotinet.com Tero Kaarlela ...

AIX 4.1.2 -> 4.1.5 wanted
Hi, I would like to buy AIX version between 4.1.2 and 4.1.5. On original CD's. If someone has these please inform me at. tero dot kaarlela at kotinet dot com Tero Tero Kaarlela schrieb: > Hi, > > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. > > > tero dot kaarlela at kotinet dot com > > > Tero Somewhere I have original 4.x-Update CDs. Tomorrow I will send you more infos by email. Andreas Kohl Tero Kaarlela schrieb: > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. Look into your mailbox. -- Uli Tero Kaarlela wrote: > Hi, > > I would like to buy AIX version between 4.1.2 and 4.1.5. On original > CD's. If someone has these please inform me at. > > > tero dot kaarlela at kotinet dot com > > > Tero Thanks for all who helped me. Now I finally found what I needed: AIX for my thinkpad. Tero ...

How to integrate gcc 3.4.4 to Tornado 2.2.1 for VxWorks 5.5.1
Hi, all. Did anybody tried to integrate the gcc 3.4.4 to Tornado 2.2.1, whose native compiler is gcc 2.96 ? I know that the gcc 3.4.4 is delivered as part of Workbench IDE with VxWorks 6.x and generally it is supported by WindRiver. If you tried and, hopefully, succeeded to integrate the compiler, please outline the procedure or, alternatively, point me to a resource explaining this issue. If you tried and not succeeded, please give me an indication - whether, in your opinion, it is possible at all. We have an application written under VxWorks 5.5.1 with Tornado 2.2.1 and now we trying to e...

AIX 5.1 to 5.2 Upgrade with HACMP 4.5.15 Cluster
I understand that HACMP 4.5.15 is supposed to run on AIX 5.2. I have (2) 6M1 servers and a 6M2 in a concurrent HACMP-ES cluster. My question is whether I can upgrade one cluster member at a time from AIX 5.1 to AIX 5.2, rejoin the cluster, and then upgrade another member, until all 3 are done? I have been told by IBM that they don't support running a cluster on two different levels of OS. Has anyone done this? After I am upgraded to AIX 5.2, then I plan to upgrade to HACMP 5.2. Am I nuts? Bob Duman ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #6
Wasn't really the solution I came up with; but it worked. You might be correct since now the OpenSSL binaries will not build against the Kerberos libraries currently. libssl and libcrypto build fine along with everything else; but the actual openssl binary fails. Phil, Have you successfully linked OpenSSL with the new Kerberos libraries ? Thanks, Lamar -----Original Message----- From: Sam Hartman [mailto:hartmans@mit.edu] Sent: Friday, February 09, 2007 10:18 AM To: Saxon, Lamar Cc: pgp@psu.edu; kerberos@MIT.EDU Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Do you really want rtl as a linker flag? Isn't that going to be an issue for people linking against the kerberos libraries. Why is that the right solution? Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and delete this e-mail. You are hereby notified that any dissemination, distribution or copying of this e-mail and/or any attachments thereto, is strictly prohibited. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos ...

convert String "1;2;3;4;5;" to Array [1, 2, 3, 4, 5]
I'm trying to convert a String of numbers that are separated by semicolons to an Array---totally for fun, to stretch my ruby understanding, fyi. I use the Array in a while loop which does work when the Array looks like = [1,2,3,4,5,...]---so that part is working. But I want to use ruby to convert a String = "1;2;3;4;5;6;7;8;9;10" into an Array [1,2,3,4,5,...] so that I can use these values. I've tried many a method, but can't seem to get the desired result; I've tried gsub(/\;/, ","), eval (), and others. ########## raw_data = "1;2;3...

gcc 4.1.1 on AIX 5.2
How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? Compiling GCC 4.1.1 has been taking days ( more than 72 hours) on my machine and its still compiiiiiiiiiiiiiiiiiiling. My machine is relatively less loaded and the only process running is compiling GCC. I'm having to compile GCC 4.1.1 because to be able to use libstdc++, one needs to compile gcc with some assembler patches on the machine (as per http://gcc.gnu.org/install/specific.html#x-ibm-aix) My machine shows oslevel -r as 5200-04, which according to http://techsupport.services.ibm.com/ already has all the required fixes. Any hints on what is wrong with my machine?? Thanks in advance! Ravindra. In article <1166104996.447605.120150@l12g2000cwl.googlegroups.com>, "Ravindra" <ravindra.rajaram@gmail.com> writes: > How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? I think you can download it precompiled from http://aixpdslib.seas.ucla.edu/packages/gcc.html Ravindra wrote: > How long does it take to compiler gcc 4.1.1 on a decent AIX 5.2 ? > Compiling GCC 4.1.1 has been taking days ( more than 72 hours) on my > machine and its still compiiiiiiiiiiiiiiiiiiling. > My machine is relatively less loaded and the only process running is > compiling GCC. > I'm having to compile GCC 4.1.1 because to be able to use libstdc++, > one needs to compile gcc with some assembler patches on the machine (as > per http://gcc.gnu.org/install/specif...

Reverse binary compatibility between AIX 5.2 and AIX 5.1
Hi , I wrote a simple "hello world" program on AIX5.2 using gcc compiler . The resultant binary exe(name - getpqstatus) when i ran on AIX5.1 it is giving the below error : exec(): 0509-036 Cannot load program ./getpqstatus because of the following errors: 0509-130 Symbol resolution failed for getpqstatus because: 0509-136 Symbol __strtollmax (number 15) is not exported from dependent module /usr/lib/libc.a(shr.o). 0509-192 Examine .loader section symbols with the 'dump -Tv' command. Does anyone has any idea why this is happening ..? Does even simple programs compiled in AIX5.2 do not run on AIX5.1 ...? Any help will be really helpful and appreciated ... Thanks and Regards Sona . H'llo Sona, What you're trying to do is not possible. AIX is being maintained in such a way that older programs will still run on the newer versions of AIX. The other way round, however, is not guaranteed. Apparently, the strtollmax() function was only invented in AIX 5.2, and AIX 5.1 doesn't have it. The golden rule is: whenever you want to support multiple versions of AIX, compile it on the oldest version you want to support. It will *usually* work on the newer versions as well. Cheers, Menno Menno Willemse <flexor@wanadoo.nl> wrote: > The golden rule is: whenever you want to support multiple versions of > AIX, compile it on the oldest version you want to support. It will >...

[tao-users] The differences between TAO 1.4.1.2 and 1.5.1.0 #2
This is a multi-part message in MIME format. ------_=_NextPart_001_01C74A75.80E5ABB0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello all, =20 Could someone tell me where can I find a document which describes about the differences between TAO 1.4.1.2 and 1.5.1.0? =20 Thanks with regards, Shi Lei ------_=_NextPart_001_01C74A75.80E5ABB0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"> <META content=3D"MSHTML 6.00.2900.3020" name=3DGENERATOR></HEAD> <BODY> <DIV><FONT face=3DArial size=3D2><SPAN class=3D604250205-07022007>Hello=20 all,</SPAN></FONT></DIV> <DIV><FONT face=3DArial size=3D2><SPAN=20 class=3D604250205-07022007></SPAN></FONT>&nbsp;</DIV> <DIV><FONT face=3DArial size=3D2><SPAN class=3D604250205-07022007>Could = someone tell=20 me where can I find a document which describes about the differences = between TAO=20 1.4.1.2 and 1.5.1.0?</SPAN></FONT></DIV> <DIV><FONT face=3DArial size=3D2><SPAN=20 class=3D604250205-07022007></SPAN></FONT>&nbsp;</DIV> <DI...

Printing 2^1, 2^2, 2^3, 2^4 and 2^5
Hi, When I use a while loop, the output is: 2 4 8 16 32, as desired: <?php $c=1; while($c<=5) { $d = newpow(2, $c); print "$d "; $c++; } function newpow($base, $power) { // statements... } ?> The But when I use a for loop, the output is: 64: <?php for($c=1; $c<=5; $c++); { $d = newpow(2, $c); print "$d "; } function newpow($base, $power) { // statements... } ?> Why is this?? Many thanks, Michael mejpark wrote: > When I use a while loop, the output is: 2 4 8 16 32, as desired: [...] > The But when I use a for loop, the output is: 64: > > <?php > > for($c=1; $c<=5; $c++); Here your loop ended right at the ; After the loop comes this: > { > $d = newpow(2, $c); > print "$d "; > } Heiko -- http://portal.richler.de/ Namensportal zu Richler http://www.richler.de/ Heiko Richler: Computer - Know How! http://www.richler.info/ private Homepage On 18 Mar, 11:02, Heiko Richler <heiko-rich...@nefkom.net> wrote: > mejpark wrote: > > When I use a while loop, the output is: 2 4 8 16 32, as desired: > [...] > > The But when I use a for loop, the output is: 64: > > > <?php > > > for($c=1; $c<=5; $c++); > > Here your loop ended right at the ; > > After the loop comes this: > > > { > > $d = newpow(2, $c); > > print "$d "; > > } > > Heiko > > --http://portal.richler.d...

Compatibility of Tornado 2.2.1 with vxWorks 5.4/5.5
Can anyone tell me,is there a necessity of using vxWorks5.5 with Tornado 2.2.1. if we use vxWorks 5.4 with Tornado2.2.1 are there any feature related issues?? Thanks in advance Mudit. muditsimlote@yahoo.co.in wrote: > Can anyone tell me,is there a necessity of using vxWorks5.5 with > Tornado 2.2.1. > if we use vxWorks 5.4 with Tornado2.2.1 are there any feature related > issues?? > > Thanks in advance > > Mudit. Hi, AFAIK,there wont be any issue with using vxworks5.4 with tornado2.2.1. Regards, s.subbarayan ...

problem with VisiBroker 5.2 with java 1.4.1 on AIX
There is small CORBA server. It works with VisiBroker 5.2, java 1.3.1 on AIX 5. After migration to java 1.4.1 server doesn't work. Exeption occuars in ORB.init method: java.lang.NoClassDefFoundError: sun/security/provider/Sun at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:173) at com.inprise.vbroker.orb.ORB.installServiceCollection(ORB.java:1257) at com.inprise.vbroker.orb.ORB.installServices(ORB.java:1298) at com.inprise.vbroker.orb.ORB.initialize(ORB.java:1089) at com.inprise.vbroker.orb.ORB.se...

Web resources about - Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 #2 - comp.unix.aix

Help:Installing Japanese character sets - Wikipedia, the free encyclopedia
This help page will help you install Japanese character sets so that your computer will display them properly on the internet in your web browser ...

Earn Free Facebook Credits For Installing Apps — Of Course, There’s A Catch
This looks pretty cool at first: Earn free Facebook Credits for installing applications on your iPhone or Android device. AppDog offers this ...

Installing solar panels - Flickr - Photo Sharing!
Solar panels are lifted into place.

Installing Virtru for Business on Your Google Domain - YouTube
Installing Virtru for Business takes about a minute through the Google Apps Marketplace. When you install Virtru for Business you gain the ability ...

Fatal unit fire: Builder Ray Finianos reduced height of building to avoid installing fire sprinklers ...
The builder of&nbsp;a south-west Sydney unit block where a young woman plunged to her death during a ferocious fire told a certifier to reduce ...

'Green' light bulb moment for councils installing LED street lights
Nine Sydney councils are getting ready to turn off the lights &ndash; 13,000 of them &ndash; to save more than $20 million.

Iran installing new nuclear equipment
Sky News is Australia's leader in 24-hour news. Iran has begun installing next-generation equipment at one of its main nuclear plants, a new ...

Peter Garrett believed installing insulation batts 'not that hard', royal commission told
Former environment minister Peter Garrett believed installing insulation batts was ''not that hard'' based on his own personal experience, an ...

Gillard defends installing Slipper
BBC News Gillard defends installing Slipper Sydney Morning Herald Prime Minister Julia Gillard has defended her decision to install Peter ...

CSIRO says installing solar panels on roofs of businesses could take pressure off the electricity grid ...
Installing more solar panels on the roofs of businesses would help Australia's energy grid cope with increased demand.

Resources last updated: 3/26/2016 9:44:42 PM