f



perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3?

Did this base fileset first appear in 5.2 or did it first appear in 5.3?

(I don't have 5.3 hosts, so I can't check that.)

Thanks!

-Dan
0
usenet38 (424)
1/16/2006 8:04:04 AM
comp.unix.aix 10963 articles. 1 followers. drkirkby (98) is leader. Post Follow

2 Replies
1114 Views

Similar Articles

[PageSpeed] 20

Dan Foster wrote:
> Did this base fileset first appear in 5.2 or did it first appear in 5.3?
> 
> (I don't have 5.3 hosts, so I can't check that.)
> 
> Thanks!
> 
> -Dan
  Not really sure, but I think appearance was with 5.3.
Checking at my site and found the highest level on a 5.2 machine was 
5.8.1.12 - never seen a 5.8.2.0 on a 5.2 machine
0
1/16/2006 2:26:57 PM
In article <dqgafi$jfe$1@online.de>, Friedhelm Neyer <Friedhelm.Neyer@t-online.de> wrote:
>   Not really sure, but I think appearance was with 5.3.
> Checking at my site and found the highest level on a 5.2 machine was 
> 5.8.1.12 - never seen a 5.8.2.0 on a 5.2 machine

That's what I thought. :) Thanks!

(It now appears that we may want to ask IBM, for a related matter, to
put a maximum version/release limit for SUMA downloads.)

-Dan
0
usenet38 (424)
1/16/2006 4:20:03 PM
Reply:

Similar Artilces:

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

perl 5.8.2.x on aix 5.2 install problem
I used compare_report and LatestFixData52 to generate a list of software less than current on a 5.2 system. One of the files it lists is perl.rte.5.8.2.11.bff however the installed version from the CD and subsequent updates is 5.8.0.11 and 5.8.2.0 is a prereq for 5.8.2.11. How am I supposed to get 5.8.2.x on this machine?? (note I have a similar problem on a 5.1 machine with perl 5.6.0 installed and compare_report wanting to update me to 5.8.0) Bob ...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes: Grant,> I have seen several emails from different people over the Grant,> last few months on trying to get KRB5 1.5 or later to Grant,> compile on AIX 5.x. And no responses that fix the Grant,> problem. I have had the same problem and can only presume Grant,> that Kerberos is no longer supported on AIX. Is this the Grant,> case? No Kerberos on AIX? It just won't compile anymore Grant,> with the changes to shared libraries. We no longer run AIX tests. Our donated AIX box was very old and slow, and its disk was in the process of dieing. If there's no one out there in the Kerberos development community who cares enough about AIX to get the betas, test them and send bug fixes, then yes, AIX support is going to be fairly bad. Kerberos is an open-source product; if you want it to work better on your pl...

moving xlc 5.0.1 on aix 4.3 to aix 5.2?
We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. I remember reading xlc 5.0.2 is required to be used for AIX 5.2. Does this mean we have to purchase a new compiler, or is there an upgrade available. thank you sol sol gongola wrote: > We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 > We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. > > I remember reading xlc 5.0.2 is required to be used for > AIX 5.2. Does this mean we have to purchase a new > compiler, or is there an upgrade available. Just install updates....

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released #2 #2
Hi Alex, > What are OCI's plan's for a supported TAO 1.4 release and developer > guide? Will this effect the release of the 1.3 guide? This is an excellent question - I'm sure Malcolm Spence will pitch in when he has a chance and I suspect that OCI will be supporting TAO 1.4 in due time. None of the changes in TAO 1.4 should affect the relevance of the info in the TAO 1.3 developer's guide - there's just more new stuff to document as time permits. Take care, Doug ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

[ace-users] Re: How can I use ACE(Latest Beta Kit) for AIX version 5.3/5.2 and VisualAge C++ 7.0/6.0 for AIX on machine IBM P690? \
Hi Oliana, Thanks very much for your email. Please make sure to send all questions related to TAO or ACE to the ACE mailing list or ACE+TAO newsgroup, rather than to me directly since I travel frequently and often don't have ready access to email. See http://www.cs.wustl.edu/~schmidt/ACE-mail.html for more info on how to access these resources. > I want to use ACE.tar.bz2(Latest Beta Kit) on AIX version 5.3,Now > I'm writing application program base on ACE.tar.bz2 (Latest Beta > Kit) and testing ACE.tar.bz2(Latest Beta Kit) on AIX version 5.2 for > IBM P690 and using VisualAge C++ 6.0 and VisualAge C++ 7.0,It?s very > strange ,the ACE.tar.bz2 was compiled successful,But the application > program can?t be compiled success,There are a lot of problems.It has > reported a lot of mistakes of STL head file in VisualAge ,and then > It told me there are something wrong in VisualAge C++ 6.0/7.0's head > file.I don't know why,Then ,I written testing code ,only have tested > VisualAge C++ 6.0 and VisualAge C++ 7.0 for AIX version 5.2's head > file already,the compiler was compiling and running up to snuff,no > mistake in head file.And you know ,When I put the same application > program and ACE.tar.bz2(Latest Beta Kit) in Redhatlinux for PC and > Turbo linux for IBM eServe BladeCenter, there are no mistakes,and > It?s normally compiling and running so fast.So,I don?t know why,what > happ...

building php 5.3.2 on aix 5.2
Hi, I'm trying to build PHP 5.3.2 on AIX 5.2 ML01, gcc & gcc++ 4.0, make 3.8 gmake crashes with the following msg: collect2: ld returned 254 exit status gmake: *** [sapi/cli/php] Error 1 PHP 5.0.5 builds fine. any idea? TIA Michael Michal K napisa�(a): > Hi, > > I'm trying to build PHP 5.3.2 on AIX 5.2 ML01, gcc & gcc++ 4.0, make 3.8 > > gmake crashes with the following msg: > > collect2: ld returned 254 exit status > gmake: *** [sapi/cli/php] Error 1 Of course, PHP version is 5.2.3, in addition here's my configure command ../configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2/bin/apxs --with-oracle=/path/to/ORACLE_HOME --with-openssl=/opt/freeware --disable-xml --disable-pear --disable-dom --disable-simplexml --enable-mbstring --enable-calendar best regards, M ...

mixing AIX 5.2 and AIX 5.3 on power5?
Looks like I may get a p550q soon. I'm not allowed to migrate the existing applications (yet) to 5.3. I want to install a 5.3 LPAR and begin understanding the VIO layers. Can I mix 5.2 and 5.3 LPARs on the same p550q? I know the 5.2 must be at the whole CPU level and the 5.3 could use portions of a single CPU. Anything else? Mike yes you can have 5.2 & 5.3 on different lpars on the same p550, and yes, you need 5.3 to do micropartitioning with the cpu's. with 5.3 you can also run your lpars in uncapped mode so that unused processing units can be accessed by your active partitions from the shared processor pool. 5.3 has some significant improvements to virtualization, so if youre interested in this stuff, i would recommend you try to get your app to run on the 5.3 partition even if you have to port some stuff. theres lots of good redbooks on virtualization. it gets a bit complicated though, and i'm still trying to figure a lot of it out. good luck. http://www.redbooks.ibm.com/abstracts/sg247940.html?Open On 2006-01-29, christiancolborn <christiancolborn@yahoo.com> wrote: > yes you can have 5.2 & 5.3 on different lpars on the same p550, and > yes, you need 5.3 to do micropartitioning with the cpu's. with 5.3 you > can also run your lpars in uncapped mode so that unused processing > units can be accessed by your active partitions from the shared > processor pool. 5.3 has some significant improvements to > virtualization, ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

ACE 5.4 build with gcc 3.3.2 on AIX 5.2 fails
I am failed to build ACE 5.4 on AIX 5.2 with gcc3.3.2 (binaries of gcc). I used config-aix5.1.h and platform_aix_g++.GNU. The error message is as following, /usr/linux/bin/ld: target expall not found colloect2: ld returned 1 exit status My guess is that AIX has a limit of 2K on maximum length of line. And the line for linking all the object files at that point is longer than 6000 bytes. Is there any way getting around this? Any help will be greatly appreciated. Thanks in advance. Ying (drycup@yahoo.com) Here are the detailed information, ACE VERSION: 5.4 HOST MACHINE and OPERATING SYSTEM: pSeries model p615, 64-bit-kernel mode, AIX5.2 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): gcc 3.3.2 (binary distribution) CONTENTS OF $ACE_ROOT/ace/config.h: // config-aix5.1.h,v 1.5 2003/12/16 17:49:48 elliott_c Exp // // Config file for AIX 5.1 // This define is needed for building with Visual Age C++ 5 in incremental // mode. In the batch mode build, platform_aix_ibm.GNU sets it. The incremental // mode compiler won't be supported after ACE 5.3, so this will also go away // in that timeframe, so don't worry about future AIX versions. #if !defined (ACE_AIX_VERS) # define ACE_AIX_VERS 501 #endif #include "ace/config-aix-4.x.h" // AIX 5.1 has AIO, but it doesn't have the same API as other POSIX // systems, and the semantics of operations are ...

[ace-bug] Compile ACE 5.4 on AIX 5.2 with gcc 3.3.2
Failed to build ACE 5.4 on AIX 5.2 with gcc3.3.2 Used config-aix5.1.h and platform_aix_g++.GNU I failed with ACE5.1, 5.3 too, so I tried 5.4. Does anybody know IF it works ? Could it help to build my own AIX5.2 gcc ? (my gcc 3.3.2 is binary AIX 5.1 but it worked fine for Non-ACE- applications) Do I have to use IBM Visual C++ Compiler ? Any suggestions would be helpful. ACE VERSION: 5.4 HOST MACHINE and OPERATING SYSTEM: RS/6000, 32-bit-kernel mode, AIX5.2 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): gcc 3.3.2 (binary distribution) CONTENTS OF $ACE_ROOT/ace/config.h: // config-aix5.1.h,v 1.5 2003/12/16 17:49:48 elliott_c Exp // // Config file for AIX 5.1 // This define is needed for building with Visual Age C++ 5 in incremental // mode. In the batch mode build, platform_aix_ibm.GNU sets it. The incremental // mode compiler won't be supported after ACE 5.3, so this will also go away // in that timeframe, so don't worry about future AIX versions. #if !defined (ACE_AIX_VERS) # define ACE_AIX_VERS 501 #endif #include "ace/config-aix-4.x.h" // AIX 5.1 has AIO, but it doesn't have the same API as other POSIX // systems, and the semantics of operations are a bit different. Will take // some real work to get this going. //#define ACE_HAS_AIO_CALLS // I think this is correct, but needs to be verified... -Steve Huston #define ACE_HAS_SIGTIMEDWAIT // AIX 5....

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

AIX 5.1 / VAC 6.0 vs AIX 5.2 / patched VAC 6.0
Hi everybody, I am trying to build some C++ application on the following environment: AIX 5.2 / patched Visual Age C++ 6.0. This application is based on libraries built for the AIX 5.1 / Visual Age C++ 6.0 (base, ie no patch) platform. Compilation works fine. However link results in unresolved symbols (defined in the above libraries). According to IBM support: - AIX 5.1 / Visual Age C++ 6.0 is a supported platform - AIX 5.2 / Visual Age C++ 6.0 with lattest patch is a supported platform - AIX 5.2 / Visual Age C++ 6.00 base version (ie without any patch) isn't a supported platform (!...

Looking for AIX 5.2 binaries, IS anyone running Ruby on AIX 5.2 ??
Looking for AIX 5.2 binaries, IS anyone running Ruby on AIX 5.2 ?? Regards Bryan Webb On Fri, 8 Jul 2005 bww00amdahl@yahoo.com wrote: > Looking for AIX 5.2 binaries, IS anyone running Ruby on AIX 5.2 ?? We are still running 5.1 here at work and planning to go directly to 5.3 later on this year. -- Matt Nothing great was ever accomplished without _passion_ bww00amdahl@yahoo.com wrote: > Looking for AIX 5.2 binaries, IS anyone running Ruby on AIX 5.2 ?? > We are running ruby 1.8.3 on AIX 5.2. It's more easier to build ruby on AIX with the 1.8.3 version. But you will ha...

Installing AIX 5.1, 5.2 and 5.3 on a single server
Hi all, Is there any way to install different versions of AIX (from 5.1 to 5.3) on a single server? And to make them work simultaneously? I heard of LPAR but I am not sure it is possible to do such a thing with this feature... Thx for your help in advance. Regards The_Nail wrote: > Hi all, > > Is there any way to install different versions of AIX (from 5.1 to > 5.3) on a single server? And to make them work simultaneously? > I heard of LPAR but I am not sure it is possible to do such a thing > with this feature... > > > Thx for your help in advance. > Regar...

Aix 5.2 and gcc 3.3
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Any bleading edgers out there get this to work? Building with BerkeleyDb 4.1.25 and TLS Had some problems with propolice (stack smashing protection) causing gcc to fail. Removed that option and now it compiles but won't link... yeah I know AIX what's new? The configure script for newdb had some of the same errors while testing for mutex's but eventually found configure:17733: result: UI/threads/library Fails with ld: 0711-317 ERROR: Undefined symbol: .mutex_init ld: 0711-317 ERROR: Undefined symbol: .cond_init ld: 0711-317 ERROR: Undefined symbol: .mutex_trylock ld: 0711-317 ERROR: Undefined symbol: .mutex_lock ld: 0711-317 ERROR: Undefined symbol: .cond_wait ld: 0711-317 ERROR: Undefined symbol: .mutex_unlock ld: 0711-317 ERROR: Undefined symbol: .cond_signal ld: 0711-317 ERROR: Undefined symbol: .mutex_destroy beyond that I'm trying w/o newdb and see if that works. acqant -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/PZb/eDVHAE9jNDwRAivoAJ4114m2pejXUMfTZ/0hjq7IGruRpgCfRZoU gVZFeQfYeYZmh6uEhGodtcY= =VoKZ -----END PGP SIGNATURE----- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 anthony wrote: | Any bleading edgers out there get this to work? | | Building with BerkeleyDb 4.1.25 and TLS - --snip-- | Fails with | | ld: 0711-317 ERROR: Undefined symbol: .mutex_init | ld: 0711-317 ERROR: Undefined symbol: .cond_init | ld: 0711-317 ERROR: Undefined symbol: .mutex_trylock | ld: 07...

Can I restore Aix 5.3 backup with Aix 5.2 boot and...?
Hello, Situation: At home I have RS6000 that I bought for educational purpose. The model is IBM RS/6000 7044-170 that has AIX 5.3 installed. As I am really a beginner in the Unix based operating systems field, I presume there will be a lot of backup/restore procedures in the begining. At home I have 2 desktop computers running Windows XP Home in network with the RS 6000. Unfortunately the server doesn't have tape drive, but only CD and floppy. I have already made a backup with mksysb, excluding the filesystem that the backup is going to be in. Questions: 1. Please, advise me how can I restore this backup after things mess up. I'm thinking of splitnig it on two CDs and every time I have to restore it - booting from the Aix 5.2 boot cd that I have, copying it on the hard drive, merging it into one file and after that - restoring. If you can suggest me a more elegant way - please, do it :-) 2. The second question - the one from the topic - can I restore with the AIX 5.2 boot cd backup of AIX 5.3. From my beginner's logic - I think it's not going to be a problem, but I need someone to confirm. Thank you all very much in advance. In article <1149258472.280674.145380@g10g2000cwb.googlegroups.com>, Simeon.Iskidzhiyski <simaka@gmail.com> wrote: > At home I have RS6000 that I bought for educational purpose. The model > is IBM RS/6000 7044-170 that has AIX 5.3 installed. As I am really a > beginner in the Unix based operating systems field, I pre...

Apache 2.0.50 php 4.3.8 Aix 5.2
I have apache 2 already installed and working. aixstar root /usr/httpd/bin > ./httpd -l Compiled in modules: core.c mod_access.c mod_auth.c mod_include.c mod_log_config.c mod_env.c mod_setenvif.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_imap.c mod_actions.c mod_userdir.c mod_alias.c mod_so.c ../configure --with-apxs2=/usr/httpd/bin/apxs --with-oci8=/ora01/app/oracle/product/9.2.0.1.0 --enable-ftp --enable-sigchild --disable-libxml Works fine, without displaying any errors. m...

Can not install/compile DBI/DBD on AIX 5.3 or AIX 5.2
Im at my wits end here and need serious help as time is running out. Ive just installed a new box with AIX 5.3 and it included IBM's flavor of Perl 5.8.2 I can not install the Bull version of DBI as it expects an older version of Perl with a different layout. Note: Ive tried faking it out without success. So I'm now trying to compile the DBI source. I keep getting the follow errors with DBI and other modules: /usr/opt/perl5/lib/5.8.2/aix-thread-multi/CORE/reentr.h:619: error: field `_drand48_struct has incomplete type /usr/opt/perl5/lib/5.8.2/aix-thread-multi/CORE/reentr.h:727: ...

howto show firmware of VXA-2 tape in aix 5.2 and 5.3?
I want to show the firmware level of an IBM / Exabyte/Tandberg VXA-2 tape drive, for both AIX 5.2 and 5.3 to see if I can buy some fancy new tape media for it; so far I've tried lscfg -vl rmt0 and was hoping for a "Device Specific" line showing the firmware, but instead got back devspec lines (Z1 210A) (LI A170029C) (Z0018002028300013A) (Z3L1) << VXA-2 firmware versions once were of format Vnnnh, later became Vnnnnh where h is hex, n is decimal. >> The .PDF "Troubleshooting the IBM VXA-2 Tape Drive" blithely says to use the vxatool program to view/upgrade the firmware release, but on Exabyte's website I don't see vxatool available for download for AIX. Is there some other aix command I could issue, or some other source of vxatool for aix, or does this need a CE visit? I hesitate to yank the drives to view them under windows, if there's some better approach... Frank On Oct 4, 11:26 am, "Frank Winans" <fwin...@sbcglobal.net> wrote: > I want to show the firmware level of an IBM / Exabyte/Tandberg > VXA-2 tape drive, for both AIX 5.2 and 5.3 > to see if I can buy some fancy new tape media for it; > > so far I've tried lscfg -vl rmt0 > and was hoping for a "Device Specific" line > showing the firmware, but instead got back devspec lines > (Z1 210A) > (LI A170029C) > (Z0018002028300013A) > (Z3L1) > > << VXA-2 firmware ver...

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released #2
Hi Tom, > We are currently arm-wrestling with TAO-1.3.3 on VxWorks-5.5/Tornado-2.2 > built with non-native exceptions and with implicit templates. Implicit > templates are desirable since we are now using STL and those nested > templates make explicit instantiation almost impossible. Non-native > exceptions are important since native exceptions lead to a factor of 4.5 > increase in code size (!!). > > Implicit templates cause trouble with singletons, since the VxWorks-2.x > loader does not respect weakly-defined symbols, so one can not load > multiple modules which reference the same templated singleton. Our > workaround involves using RTTI and implementing a "singleton registry" > to enable proper singleton behavior. This strategy works for our > production code based on TAO-1.2.1, and hopefully we'll finish off our > move to TAO-1.3.3 sometime soon. > > I've mentioned this on-list once or twice, and had positive feedback on > incorporating fixes or changes to move working code into the TAO tree. > We haven't until recently had time to consider moving away from > TAO-1.2.1, so patches would not have helped. I'd like to post (working) > patches to the list for feedback, and I'd like to do this in time for > consideration to move this code into the next TAO release if deemed > appropriate. Either way we should have something to contribute to our > VxWorks br...

compiling perl 5.8.8 on AIX 5.3
I am trying to compile perl 5.8.8 on an AIX 5.3 box and ran into the following make error, any ideas what this is about and how to fix it. root @ hostname: /syshome/userid/perl-5.8.8 => gmake AutoSplitting perl library ../miniperl -Ilib -e 'use AutoSplit; \ autosplit_lib_modules(@ARGV)' lib/*.pm ../miniperl -Ilib -e 'use AutoSplit; \ autosplit_lib_modules(@ARGV)' lib/*/*.pm gmake lib/re.pm gmake[1]: Entering directory `/syshome/userid/perl-5.8.8' gmake[1]: `lib/re.pm' is up to date. gmake[1]: Leaving directory `/syshome/userid/perl-5.8.8' Making DynaLoader (static) gmake[1]: Entering directory `/syshome/userid/perl-5.8.8/ext/DynaLoader' gmake[1]: Leaving directory `/syshome/userid/perl-5.8.8/ext/DynaLoader' gmake[1]: Entering directory `/syshome/userid/perl-5.8.8/ext/DynaLoader' gmake[1]: Leaving directory `/syshome/userid/perl-5.8.8/ext/DynaLoader' gcc -o perl -L/usr/local/lib -bE:perl.exp perlmain.o lib/auto/DynaLoader/DynaLoader.a libperl.a `cat ext.libs` -lbind -lnsl -ldl -lld -lm -lcrypt -lc -lbsd gcc: '-b' must come at the start of the command line gmake: *** [perl] Error 1 root @ host: /syshome/userid/perl-5.8.8 => zrnaqvi@yahoo.com wrote: > I am trying to compile perl 5.8.8 on an AIX 5.3 box and ran into the > following make error, any ideas what this is about and how to fix it. > gcc -o perl -L/usr/local/lib -bE:perl.exp perlmain.o > lib/auto/DynaLoader/DynaLoader.a libper...

Web resources about - perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3? - comp.unix.aix

etree - Wikipedia, the free encyclopedia
etree , or electronic tree, is a music community created in the summer of 1998 for the online trading of live concerts. etree pioneered the standards ...

Boot 2.0 RC1: Stable API, Immutable Filesets, Growing Community
The Adzerk ad serving infrastructure and API enables sites and apps to sell effective advertising. Serve banners, mobile, video, and native advertising. ...

Testdroid allows Remote Manual Access to any Android device
Android developers need all the help they can to make their apps better. Testing on local phones may be enough but one can’t avoid bugs and errors ...

Apago: Company Profile
Apago, Inc. , founded in 1991, is a software company headquartered in Alpharetta, Georgia, north of Atlanta. We provide retail applications, ...

ATPM 11.06 - Segments: Tiger’s New Stripes
When I ripped open the box two weeks ago, and found within it a new operating system, I wasn’t expecting miracles. I’ve learned not to expect ...


Have you looked at your .htacess file recently? Your Apache server may not be secure
... all. It also checks to see if it already saved the file that the link points to, and in this way, won’t download duplicates, keeping the fileset ...

This startup thinks it can speed up a cure for cancer by bringing scientific research into the YouTube ...
... rest of my peers." Figshare allows users to upload any file format such as figures, datasets, media, papers, posters, presentations, and filesets. ...

Operating System terms
List of computer operating system terms and definitions relating to computer operating systems.

David Worlock - Developing digital strategies for the information marketplace - Supporting the migration ...
DavidWorlock.com is dedicated to the idea that using information in networks creates wholly fresh businesses which , though often founded on ...

Resources last updated: 3/26/2016 9:03:10 PM