Install problems with Oracle installer 2.2 for Oracle 9i Client 9.2.0.1.0
Please forgive me if I am posting this in the wrong forum - I am an Oracle Newbie. Here are my computer specs : Windows 2003 - fully patch from Microsoft as of Sept 4th 2004 HP LP2000r 1 x 1,1 Gig Intel processor 1 GB RAM Hardware RAID 1, 12 GB with 8 GB freespace Clean install, no other programs. At first I tried running the Oracle installer program from the CD ROM and came up with the error that it could not find the javaw.exe program. I then tried installing and reinstalling several versions of java to no avail. Next I searched through groups.google and found the solution: 1. Copy the Oracle CD to the hard drive. I copied it to a subfolder directly to C:\Oracle9i 2. Change the file c:\oracle9i\install\ORAPARAM.INI to reflect the actual name of the directories listed in the install directories of the cd I just copied. I did this and next took out some "."s and put the absolute path to the java program and something called the "OUI_LOCATION". JRE_LOCATION=C:/oracle9i/stage/Components/oracleswdjre/13110a/1/DataFiles/Expanded OUI_LOCATION=C:/oracle9i/stage/Components/oracleswdoui/220120/1/DataFiles/Expanded Okay so good so far. This time the installer actually started. The problem occurs in the next few steps, when I click "next" (weiter in German) from the welcome screen- please understand if I translate something wrong here. Then I am shown the installation directory screen, where I select the default listed: Source : C:\Oracle...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi   I have 18 inputs (arrays) which contain certain statistics and if time  = 3 seconds, set the values of time step 5.0 to -9999.0.   I was wondering if there is an efficient way to do this without using a lot of case statements?   Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain.   The time may vary. Let me give an example. if time  = 2.1, I want to set the time step's  3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc ....................................................................   Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

OAS 9.0.3 install problem on AIX 5.1
Everything installs fine. The linking errors with this message: Error in invoking target install of makefile ....../OAS_HOME/sysman/lib/ins_sysman.mk I have /usr/ccs/bin in my path. My make.log file has: ....../OAS_HOME/lib/libagent9.a is not valid in the current object mode. I tried putting /usr/local/bin in my path instead of /usr/ccs/bin thinking the Apache needed the gnu version tools but that didnt work. Any ideas? thans Chris ...

moving xlc 5.0.1 on aix 4.3 to aix 5.2?
We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. I remember reading xlc 5.0.2 is required to be used for AIX 5.2. Does this mean we have to purchase a new compiler, or is there an upgrade available. thank you sol sol gongola wrote: > We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 > We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. > > I remember reading xlc 5.0.2 is required to be used for > AIX 5.2. Does this mean we have to purchase a new > compiler, or is there an upgrade available. Just install updates....

Upgrade from Oracle 9.2.0.1 to Oracle 9.2.0.3
Hello All, I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? Also I had a bad experience with my development server when applying 9.2.0.3 patchset. Is there anything you recommend before I start again? Thanks Kumu Hello Kumu, What is the reason for upgrade? Any specific bugs or issues you experience? You can open TAR as well to get support recommendations for your situation. New patches can introduce new problems as you can see, Regards, Ron DBA Infopower http://www.dbainfopower.com Standard disclaimer: http://www.dbainfopower.com/dbaip_advice_disclaimer.html "kumu" <forlist2001@yahoo.com> wrote in message news:a44abd39.0402161837.6badb9ed@posting.google.com... > Hello All, > I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or > 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? > > Also I had a bad experience with my development server when applying > 9.2.0.3 patchset. Is there anything you recommend before I start > again? > > Thanks > Kumu "Ron" <support@dbainfopower.com> wrote in message news:<QqWdnRM_cMiwWqzdRVn-vg@comcast.com>... > Hello Kumu, > > What is the reason for upgrade? Any specific bugs or issues you > experience? > > You can open TAR as well to get support recommendations for your > situation. > > New patches can introduce new...

upgrade from oracle 9.2.0.1.0 to 9.2.0.5.0
Hi, I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for window version 32 bits, does anyone can provide the node document information of step by step doing it. many thanks leehi leehi wrote: > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, Windows NT4? W2k? W2K3? W2K3 - Release 2? Why stop ot 9.2.0.5? > does anyone can provide the node document information of step by step > doing it. leehi wrote: > Hi, > > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, > > does anyone can provide the node document information of step by step > doing it. > > many thanks > > leehi Go to metalink.oracle.com (registration and Oracle support CSI required). Click on Patches and Updates tab. Wait for the whole screen to load. Use one of the search functions to find your patch (note the Quick Links if you are getting something common, like 9206 or 9207). When you finally get to your patch download, click on the readme (the piece-of-paper icon next to the download icon). Read all the instructions. It's a good idea to read the instructions every time you do it, even (or perhaps especially) when you are comfortable doing it. The readme is usually also included with the patch. Download and unzip the patch. Look at what is there in the patch, perhaps there are additional release notes. Look around on metalink for addition...

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

Oracle 8.1.7
Hello All; Our Oracle installation is being outsourced. Currently it is hosted by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 will be the hosting o/s. The Oracle installation will remain at version 8.1.7. I've heard that AIX 5.2 uses 64-bit addressing whereas AIX 4.3 uses 32-bit addressing. Does anyone know of any potential issues/problems with such a migration? Thanks! Michael "michael brule" <michael.brule@phoenixwm.com> wrote in message news:55f7800f.0411290816.6c66d00e@posting.google.com... > Hello All; > > Our Oracle installation is being outsourced. Currently it is hosted > by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 > will be the hosting o/s. The Oracle installation will remain at > version 8.1.7. > > I've heard that AIX 5.2 uses 64-bit addressing whereas AIX 4.3 uses > 32-bit addressing. Does anyone know of any potential issues/problems > with such a migration? > > Thanks! > > Michael Hi, Check Metalink notes 225551.1, 222404.1, 169426.1, 223522.1 and 231901.1. Regards... "michael brule" <michael.brule@phoenixwm.com> wrote in message news:55f7800f.0411290816.6c66d00e@posting.google.com... > Hello All; > > Our Oracle installation is being outsourced. Currently it is hosted > by AIX 4.3 o/s. When it is transferred to the outsourcer, it AIX 5.2 > will be the hosting o/s. The Oracle installation will remai...

Problems building Apache-1.3.33 on AIX 5.2/5.3
Hello all, I am getting the following errors while building apache 1.3.33 on my AIX 5.2 and 5.3 machines:- ===> src/main gcc -c -I../os/unix -I../include -DAIX=520 -U__STR__ -DAIX_BIND_PROCESSOR -DUSE_HSREGEX -DUSE_EXPAT -I../lib/expat-lite -DNO_DL_NEEDED `../apaci` http_main.c In file included from http_main.c:597: /usr/include/pthread.h:556: error: parse error before '*' token /usr/include/pthread.h:559: error: parse error before '*' token /usr/include/pthread.h:563: error: parse error before '*' token /usr/include/pthread.h:566: error: parse error befo...

AIX 5.1 / VAC 6.0 vs AIX 5.2 / patched VAC 6.0
Hi everybody, I am trying to build some C++ application on the following environment: AIX 5.2 / patched Visual Age C++ 6.0. This application is based on libraries built for the AIX 5.1 / Visual Age C++ 6.0 (base, ie no patch) platform. Compilation works fine. However link results in unresolved symbols (defined in the above libraries). According to IBM support: - AIX 5.1 / Visual Age C++ 6.0 is a supported platform - AIX 5.2 / Visual Age C++ 6.0 with lattest patch is a supported platform - AIX 5.2 / Visual Age C++ 6.00 base version (ie without any patch) isn't a supported platform (!...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes: Grant,> I have seen several emails from different people over the Grant,> last few months on trying to get KRB5 1.5 or later to Grant,> compile on AIX 5.x. And no responses that fix the Grant,> problem. I have had the same problem and can only presume Grant,> that Kerberos is no longer supported on AIX. Is this the Grant,> case? No Kerberos on AIX? It just won't compile anymore Grant,> with the changes to shared libraries. We no longer run AIX tests. Our donated AIX box was very old and slow, and its disk was in the process of dieing. If there's no one out there in the Kerberos development community who cares enough about AIX to get the betas, test them and send bug fixes, then yes, AIX support is going to be fairly bad. Kerberos is an open-source product; if you want it to work better on your pl...

Installing AIX 5.1, 5.2 and 5.3 on a single server
Hi all, Is there any way to install different versions of AIX (from 5.1 to 5.3) on a single server? And to make them work simultaneously? I heard of LPAR but I am not sure it is possible to do such a thing with this feature... Thx for your help in advance. Regards The_Nail wrote: > Hi all, > > Is there any way to install different versions of AIX (from 5.1 to > 5.3) on a single server? And to make them work simultaneously? > I heard of LPAR but I am not sure it is possible to do such a thing > with this feature... > > > Thx for your help in advance. > Regar...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

AIX 5.1 , PatchSet 9.2.0.5
Hi, After install PatchSet 9.2.0.5 (AIX 5.1) I executed catpatch.sql (witch JAVA_POOL_SIZE =300 MB wystapi� SHARED_POOL_SIZE = 300MB). Now I have following count of JAVA objects in my database: SQL> select owner, status, count(*) from sys.dba_objects where OBJECT_type like '%JAVA%' group by o wner, status; OWNER STATUS COUNT(*) ------------------------------ ------- ---------- ODM VALID 253 ODM INVALID 11 SYS VALID 9010 WKSYS VALID 40 ORDSYS VALID 906 5 rows selected the same query on another installation (another machine) : OWNER STATUS COUNT(*) ------------------------------ ------- ---------- ODM VALID 264 SYS VALID 9549 WKSYS VALID 40 ORDSYS VALID 906 ORDPLUGINS VALID 1 How many JAVA's objects must be in schema SYS in the database and how can I check that installation of PAtchSet is correct? Regards Adam ...

gcc4.0.0 installation problem on AIX 5.1
I have been trying to install gcc4.0.0 on a AIX 5.1 machine from source . I am using c shell the configure options used were --prefix='directory' the directory used has read write execute permissions for everyone. While compiling the source code it is executing the following line and is just hanging perl /people/shankha/work/compiler/gcc/gcc-4.0.0/fastjar/../contrib/ texi2pod.pl -D fastjar > fastjar.pod It doesn't proceed after this line. perl is installed on the system and is in path. The file texi2pod.pl also exists. Can anybody help me out. Thanks ...

Can not install/compile DBI/DBD on AIX 5.3 or AIX 5.2
Im at my wits end here and need serious help as time is running out. Ive just installed a new box with AIX 5.3 and it included IBM's flavor of Perl 5.8.2 I can not install the Bull version of DBI as it expects an older version of Perl with a different layout. Note: Ive tried faking it out without success. So I'm now trying to compile the DBI source. I keep getting the follow errors with DBI and other modules: /usr/opt/perl5/lib/5.8.2/aix-thread-multi/CORE/reentr.h:619: error: field `_drand48_struct has incomplete type /usr/opt/perl5/lib/5.8.2/aix-thread-multi/CORE/reentr.h:727: ...

Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 #2
Hi, I am searching for information on installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 platform. Is it possible? Regards ...

Oracle server 9.2.0.1.0, Client 9.2.0.4.0, Red Hat Linux enterprise advanced server 2.1
Hi Everybody, My Database server is running on Red Hat Linux enterprise advanced server 2.1, And my Oracle version is 9.2.0.1.0. My Client mechine also Red Hat Linux enterprise advanced server 2.1 , Oracle client version is 9.2.0.4.0. I am running a web application. Our application is in Magic edeveloper. I connect to Oracle using oracle gateway to my application. My Problem is my application is is becoming slow. I am not able to trace where the problem is. Before our application was running fine. recently i upgraded Oracle client version to 9.2.0.4.0. My Oracle client & server versions are different. I am getting error on my client mechine, it showing all memory address on the screen and the part of error is, arg register addr=83498cc .... Dump of memory from 0x83988c to 0x83499cc .... -- End of Call stack trace -- I am not able to trace where the problem is.Any insight please... Thanks, Ssreddy. ...

[ace-users] Re: How can I use ACE(Latest Beta Kit) for AIX version 5.3/5.2 and VisualAge C++ 7.0/6.0 for AIX on machine IBM P690? \
Hi Oliana, Thanks very much for your email. Please make sure to send all questions related to TAO or ACE to the ACE mailing list or ACE+TAO newsgroup, rather than to me directly since I travel frequently and often don't have ready access to email. See http://www.cs.wustl.edu/~schmidt/ACE-mail.html for more info on how to access these resources. > I want to use ACE.tar.bz2(Latest Beta Kit) on AIX version 5.3,Now > I'm writing application program base on ACE.tar.bz2 (Latest Beta > Kit) and testing ACE.tar.bz2(Latest Beta Kit) on AIX version 5.2 for > IBM P690 and using VisualAge C++ 6.0 and VisualAge C++ 7.0,It?s very > strange ,the ACE.tar.bz2 was compiled successful,But the application > program can?t be compiled success,There are a lot of problems.It has > reported a lot of mistakes of STL head file in VisualAge ,and then > It told me there are something wrong in VisualAge C++ 6.0/7.0's head > file.I don't know why,Then ,I written testing code ,only have tested > VisualAge C++ 6.0 and VisualAge C++ 7.0 for AIX version 5.2's head > file already,the compiler was compiling and running up to snuff,no > mistake in head file.And you know ,When I put the same application > program and ACE.tar.bz2(Latest Beta Kit) in Redhatlinux for PC and > Turbo linux for IBM eServe BladeCenter, there are no mistakes,and > It?s normally compiling and running so fast.So,I don?t know why,what > happ...

Problem running bind 9.2.3, bind 9.2.4rc2 and bind 9.3.0beta2 on bsd/os 5.1
named.run gives me: 16-Apr-2004 17:35:17.656 starting BIND 9.3.0beta2 -d 9 -n 2 16-Apr-2004 17:35:17.668 found 1 CPU, using 2 worker threads 16-Apr-2004 17:35:17.679 loading configuration from '/etc/named.conf' 16-Apr-2004 17:35:17.705 set maximum stack size to 67108864: success 16-Apr-2004 17:35:17.706 set maximum data size to 1073741824: success 16-Apr-2004 17:35:17.706 set maximum core size to 0: success 16-Apr-2004 17:35:17.706 set maximum open files to 128: success 16-Apr-2004 17:35:17.719 listening on IPv4 interface lo0, 127.0.0.1#53 16-Apr-2004 17:35:17.720 clientmgr @0x8189b40: create 16-Apr-2004 17:35:17.721 clientmgr @0x8189b40: createclients 16-Apr-2004 17:35:17.721 clientmgr @0x8189b40: create new 16-Apr-2004 17:35:17.721 client @0x8195000: create 16-Apr-2004 17:35:18.137 clientmgr @0x8189b40: create new 16-Apr-2004 17:35:18.138 client @0x8195800: create 16-Apr-2004 17:35:18.558 clientmgr @0x8189b40: createclients 16-Apr-2004 17:35:18.558 clientmgr @0x8189b40: create new 16-Apr-2004 17:35:18.558 client @0x8207000: create 16-Apr-2004 17:35:19.438 res 0x8318f00: create and rndc status gives me rndc: connect failed: connection refused Why? -- Member - Liberal International On 11 Sept 2001 the WORLD was violated. This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca Society MUST be saved! Extremists must dissolve. Time to see the eternal relegation of Man U, Liverpool, Everton and Millwall ...

optimizer_features_enable difference between 9.2.0.1/9..2.0.3/9.2.0.6?
Hi, All, I noticed for this parameter optimizer_features_enable , oracle document says: Syntax OPTIMIZER_FEATURES_ENABLE = {8.0.0 | 8.0.3 | 8.0.4 | 8.0.5 | 8.0.6 | 8.0.7 | 8.1.0 | 8.1.3 | 8.1.4 | 8.1.5 | 8.1.6 | 8.1.7 | 9.0.0 | 9.0.1 | 9.2.0} I noticed when I keep it default to 9.2.0 in init.ora, in version 9.2.0.3 and 9.2.0.5 with exact same database and exact same init.ora, oracle CBO did choose different plan. So there is some difference between 9.2.0.X versioin for the CBO. Where can we get such information about the difference? Thanks On 12 Jul 2005 23:37:28 -0700, "chao_ping" <zhuchao@gmail.com> wrote: > So there is some difference between 9.2.0.X versioin for the CBO. >Where can we get such information about the difference? Usually such things are outlined either in the release notes or in the new features documents. Documents that obviously no one reads. -- Sybrand Bakker, Senior Oracle DBA "chao_ping" <zhuchao@gmail.com> wrote in message news:1121236648.759298.79320@g44g2000cwa.googlegroups.com... > Hi, All, > I noticed for this parameter optimizer_features_enable , oracle > document says: > Syntax > OPTIMIZER_FEATURES_ENABLE = {8.0.0 | 8.0.3 | 8.0.4 | 8.0.5 | 8.0.6 | > 8.0.7 | 8.1.0 | 8.1.3 | 8.1.4 | 8.1.5 | 8.1.6 | 8.1.7 | 9.0.0 | 9.0.1 | > 9.2.0} > > > I noticed when I keep it default to 9.2.0 in init.ora, in version > 9.2.0.3 and 9.2.0.5 with exact same database and...

Oracle 9.2 Aix 4.3.3 linking problem
Hi All, I need your help. I just install Oracle 9.2 on Aix but when linking time, I got the error like this: ld -b64 -o installisqlplus32 -L/oracle/E05/920_64/sqlplus/lib/ -L/oracle /E05/920_64/lib/ -L/oracle/E05/920_64/Apache/fastcgi/ /oracle/E05/920_64/sqlplu s/lib/safiimfg.o -lisqlplus -lsqlplus -lfcgi `cat /oracle/E05/920_64/lib/ldfla gs` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/E05/920 _64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lv sn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -ln ls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /oracle/E05/920_64/lib/ldflags` -lnssl b9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/E05/920_64/lib/ldfla gs` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 - lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxm l9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lld -lm `cat /o racle/E05/920_64/lib/sysliblist` -lm -lpthreads `if [ "\`/usr/bin/uname -v\`" = "4" ]; \ then echo "-bI:/oracle/E05/920_64/lib/pw-syscall.exp"; fi;` -lxsd9 /orac le/E05/920_64/lib/nautab.o /oracle/E05/920_64/lib/naeet.o /oracle/E05/920_64/lib /naect.o /oracle/E05/920_64/lib/naedhs.o /oracle/E05/920_64/rdbms/lib/defopt.o - lpls9 -lsql9 -lxsd9 ld: 0711-715 ERROR: File /oracle...