f



Jedit 4.1 on FreeBSD 4.8 and Diablo-JDK1.3.1 - SIGILL 4 - won't start

Hello, all -

I've searched through Google (and on the Jedit site at sourceforge) for any
other posts relative to this problem, and haven't found any.  This post is
to compare notes and see if this is truly unique to this machine or if
someone else has seen this issue and has a ready answer for it.

The installation of "Jedit" through the FreeBSD ports system seems to go
fine - all the checksums match - and, since the installation program uses a
"jar" file rather than the typical source code compile (and that throws no
error messages), it seems as through Diablo-JDK1.3.1 is behaving properly. 
I have compiled and run another Java program using this JDK on this machine
so I know it works OK in and of itself.

When in KDE 3.2, starting "jedit" from the command line in a terminal
window, I get a very long message listing all of the various green threads
that threw  the SIGILL 4* message (it seems to start with the command to
show the spash screen).  I also get a 56Meg core dump ("java.core").  An
excerpt from the "SIGILL" message is below:

***

SIGILL    4*   illegal instruction

Full thread dump Classic VM (diablo-1.3.1-0, green threads):
    "Image Fetcher 3" (TID:0x2883c920, sys_thread_t:0x8380480, state:R)
prio=3
        at java.awt.MediaTracker.setDone(MediaTracker.java:773)
        at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
        at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
        at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
        at
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
        at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
        at
sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
        at
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
        at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
        at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
    "Image Fetcher 2" (TID:0x28841b68, sys_thread_t:0x8380280, state:R)
prio=3
        at java.awt.MediaTracker.setDone(MediaTracker.java:773)
        at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
        at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
        at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
        at
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
        at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
        at
sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
        at
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
        at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
        at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
    "Image Fetcher 1" (TID:0x288428b0, sys_thread_t:0x8380080, state:R)
prio=3
        at java.awt.MediaTracker.setDone(MediaTracker.java:773)
        at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
        at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
        at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
        at
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
        at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
        at
sun.awt.image.PNGImageDecoder.produceImage(PNGImageDecoder.java:514)
        at
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
        at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
        at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
    "Image Fetcher 0" (TID:0x28843d28, sys_thread_t:0x832c880, state:R)
prio=3
        at java.awt.MediaTracker.setDone(MediaTracker.java:773)
        at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
        at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
        at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
        at
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
        at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
        at
sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
        at
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
        at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
        at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
    "AWT-Motif" (TID:0x28846328, sys_thread_t:0x830ca80, state:MW) prio=6
        at sun.awt.motif.MToolkit.run(Native Method)
        at java.lang.Thread.run(Thread.java:484)
    "SunToolkit.PostEventQueue-0" (TID:0x28847760, sys_thread_t:0x82bee80,
state:CW) prio=6
        at java.lang.Object.wait(Native Method)
        at java.lang.Object.wait(Object.java:420)
        at sun.awt.PostEventQueue.run(SunToolkit.java:491)
    "AWT-EventQueue-0" (TID:0x288476e8, sys_thread_t:0x82bec80, state:CW)
prio=6
        at java.lang.Object.wait(Native Method)
        at java.lang.Object.wait(Object.java:420)
        at java.awt.EventQueue.getNextEvent(EventQueue.java:260)
        at
java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:106)
        at
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
        at
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
    "Finalizer" (TID:0x28837528, sys_thread_t:0x80d4080, state:CW) prio=8
        at java.lang.Object.wait(Native Method)
        at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
        at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
        at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
    "Reference Handler" (TID:0x28837300, sys_thread_t:0x8096480, state:CW)
prio=10
        at java.lang.Object.wait(Native Method)
        at java.lang.Object.wait(Object.java:420)
        at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
    "Signal dispatcher" (TID:0x28837330, sys_thread_t:0x8096280, state:CW)
prio=5
    "main" (TID:0x288371b0, sys_thread_t:0x8054080, state:R) prio=5
        at sun.awt.motif.MWindowPeer.create(Native Method)
        at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
        at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
        at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
        at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
        at java.awt.Frame.addNotify(Frame.java:353)
        at java.awt.Window.addNotify(Window.java:344)
        at java.awt.Window.show(Window.java:387)
        at org.gjt.sp.jedit.gui.SplashScreen.<init>(Unknown Source)
        at org.gjt.sp.jedit.GUIUtilities.showSplashScreen(Unknown Source)
        at org.gjt.sp.jedit.jEdit.main(Unknown Source)

***

I've since deinstalled "jedit" from this machine, but I'd like to find the
reason it barfs and get it to run.  Everything else seems to operate fine
here.

Anyone else experience this one?

YC
0
Young
4/29/2004 4:22:19 PM
comp.unix.bsd.freebsd.misc 13187 articles. 1 followers. Post Follow

4 Replies
550 Views

Similar Articles

[PageSpeed] 43

Hello again -

For the heck of it, I double-checked the capability of Diablo 1.3.1 by
trying to run one of its own demo programs - the ones that don't involve
GUI work OK, but anything involving GUI crashes just like Jedit did.

Let this serve to instruct others who may experience this issue - the JDK
could be the problem, and not the program you're trying to run on it.

YC


Earlier in the linear time track, on Thursday 29 April 2004 09:22 am, Young
Coot wrote:

> Hello, all -
>
> 8==snip== 
> 
> When in KDE 3.2, starting "jedit" from the command line in a terminal
> window, I get a very long message listing all of the various green threads
> that threw  the SIGILL 4* message (it seems to start with the command to
> show the spash screen).  I also get a 56Meg core dump ("java.core").  An
> excerpt from the "SIGILL" message is below:
> 
> ***
> 
> SIGILL    4*   illegal instruction
> 
> Full thread dump Classic VM (diablo-1.3.1-0, green threads):
>     "Image Fetcher 3" (TID:0x2883c920, sys_thread_t:0x8380480, state:R)
> prio=3
>         at java.awt.MediaTracker.setDone(MediaTracker.java:773)
>         at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
>         at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
>         at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
>         at
>
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
>         at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
>         at
> sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
>         at
>
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
>         at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
>         at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
>     "Image Fetcher 2" (TID:0x28841b68, sys_thread_t:0x8380280, state:R)
> prio=3
>         at java.awt.MediaTracker.setDone(MediaTracker.java:773)
>         at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
>         at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
>         at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
>         at
>
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
>         at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
>         at
> sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
>         at
>
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
>         at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
>         at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
>     "Image Fetcher 1" (TID:0x288428b0, sys_thread_t:0x8380080, state:R)
> prio=3
>         at java.awt.MediaTracker.setDone(MediaTracker.java:773)
>         at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
>         at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
>         at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
>         at
>
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
>         at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
>         at
> sun.awt.image.PNGImageDecoder.produceImage(PNGImageDecoder.java:514)
>         at
>
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
>         at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
>         at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
>     "Image Fetcher 0" (TID:0x28843d28, sys_thread_t:0x832c880, state:R)
> prio=3
>         at java.awt.MediaTracker.setDone(MediaTracker.java:773)
>         at java.awt.MediaEntry.setStatus(MediaTracker.java:846)
>         at java.awt.ImageMediaEntry.imageUpdate(MediaTracker.java:910)
>         at sun.awt.image.ImageWatched.newInfo(ImageWatched.java:58)
>         at
>
sun.awt.image.ImageRepresentation.imageComplete(ImageRepresentation.java:626)
>         at sun.awt.image.ImageDecoder.imageComplete(ImageDecoder.java:138)
>         at
> sun.awt.image.GifImageDecoder.produceImage(GifImageDecoder.java:281)
>         at
>
sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:257)
>         at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:217)
>         at sun.awt.image.ImageFetcher.run(ImageFetcher.java:185)
>     "AWT-Motif" (TID:0x28846328, sys_thread_t:0x830ca80, state:MW) prio=6
>         at sun.awt.motif.MToolkit.run(Native Method)
>         at java.lang.Thread.run(Thread.java:484)
>     "SunToolkit.PostEventQueue-0" (TID:0x28847760, sys_thread_t:0x82bee80,
> state:CW) prio=6
>         at java.lang.Object.wait(Native Method)
>         at java.lang.Object.wait(Object.java:420)
>         at sun.awt.PostEventQueue.run(SunToolkit.java:491)
>     "AWT-EventQueue-0" (TID:0x288476e8, sys_thread_t:0x82bec80, state:CW)
> prio=6
>         at java.lang.Object.wait(Native Method)
>         at java.lang.Object.wait(Object.java:420)
>         at java.awt.EventQueue.getNextEvent(EventQueue.java:260)
>         at
>
java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:106)
>         at
>
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
>         at
> java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
>         at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
>     "Finalizer" (TID:0x28837528, sys_thread_t:0x80d4080, state:CW) prio=8
>         at java.lang.Object.wait(Native Method)
>         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
>         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
>         at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
>     "Reference Handler" (TID:0x28837300, sys_thread_t:0x8096480, state:CW)
> prio=10
>         at java.lang.Object.wait(Native Method)
>         at java.lang.Object.wait(Object.java:420)
>         at
>         java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
>     "Signal dispatcher" (TID:0x28837330, sys_thread_t:0x8096280, state:CW)
> prio=5
>     "main" (TID:0x288371b0, sys_thread_t:0x8054080, state:R) prio=5
>         at sun.awt.motif.MWindowPeer.create(Native Method)
>         at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
>         at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
>         at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
>         at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
>         at java.awt.Frame.addNotify(Frame.java:353)
>         at java.awt.Window.addNotify(Window.java:344)
>         at java.awt.Window.show(Window.java:387)
>         at org.gjt.sp.jedit.gui.SplashScreen.<init>(Unknown Source)
>         at org.gjt.sp.jedit.GUIUtilities.showSplashScreen(Unknown Source)
>         at org.gjt.sp.jedit.jEdit.main(Unknown Source)
> 
> 8==snip==

0
Young
4/30/2004 12:42:26 AM
Young Coot <Reply@newsgroup.onlyplease> wrote:
> Hello again -
> 
> For the heck of it, I double-checked the capability of Diablo 1.3.1 by
> trying to run one of its own demo programs - the ones that don't involve
> GUI work OK, but anything involving GUI crashes just like Jedit did.
> 

I have seen the same. All the swing programs i have tried with the
jdk-1.3 don't work correctly. So i have installed the linux jdk-1.4
and everything works perfectly OK.

-- 

Michel TALON

0
talon
4/30/2004 6:42:25 AM
Thanks for the pointer, Michael - I'm in the process of downloading the
patches necessary for this (at "eyesbeyond.com"). The 1.4.2 SDK will be
downloaded later when I have the bandwidth to do so.

YC

Earlier in the linear time track, on Thursday 29 April 2004 11:42 pm, Michel
Talon wrote:

> Young Coot <Reply@newsgroup.onlyplease> wrote:
>> Hello again -
>> 
>> For the heck of it, I double-checked the capability of Diablo 1.3.1 by
>> trying to run one of its own demo programs - the ones that don't involve
>> GUI work OK, but anything involving GUI crashes just like Jedit did.
>> 
> 
> I have seen the same. All the swing programs i have tried with the
> jdk-1.3 don't work correctly. So i have installed the linux jdk-1.4
> and everything works perfectly OK.
> 

0
Young
5/1/2004 12:47:30 AM
After a huge download and massive compile of JDK 1.4 (during which I had one
sh kernel dump - never had one of those before, but I was able to call up a
second shell and reboot from there and the rest of the compile went just
fine), J-Edit now works great.  

I've been operating this FreeBSD box for sixteen months without Java since I
could never find a distribution that seemed to work with it. Now, with the
current patch-set #6 from "eyesbeyond", the jdk1.4 port works like I'd
always figured Java should work on this machine.

Looks like I'll be hanging tight with this setup for a while.  Thanks again
to Nichel (got the spelling right this time!) for the tip.

YC

In our last exciting episode, at Friday 30 April 2004 05:47 pm, Young Coot
wrote:

> Thanks for the pointer, Michael - I'm in the process of downloading the
> patches necessary for this (at "eyesbeyond.com"). The 1.4.2 SDK will be
> downloaded later when I have the bandwidth to do so.
> 
> YC
> 
> Earlier in the linear time track, on Thursday 29 April 2004 11:42 pm,
> Michel Talon wrote:
> 
>> Young Coot <Reply@newsgroup.onlyplease> wrote:
>>> Hello again -
>>> 
>>> For the heck of it, I double-checked the capability of Diablo 1.3.1 by
>>> trying to run one of its own demo programs - the ones that don't involve
>>> GUI work OK, but anything involving GUI crashes just like Jedit did.
>>> 
>> 
>> I have seen the same. All the swing programs i have tried with the
>> jdk-1.3 don't work correctly. So i have installed the linux jdk-1.4
>> and everything works perfectly OK.
>>

0
Young
5/2/2004 7:37:02 PM
Reply:

Similar Artilces:

Can't synch T|E after 4.1.4 to 4.1.4 upgrade
I upgraded my Palm Desktop for T|E w/ OS 5.2.1 and now can't sync as I could before, using USB. All settings seem ok. Win 2K tries to Install a new device on hotsyn, and ignoring, then searching, hasn't helped. palmOne suggested finding and installing one of these files: VisorUsb.inf OR PalmUSB.sys I can find neither file on my system, and they're not offered as a d/load anywhere. Also tried reinstalling, repair then fresh, no help. I did the "upgrade" because: Palm advises even updating an older 4.1.4 version to the newer 4.1.4, for updated Window Outloo...

imapd.rc doesn't start at boot FreeBSD 6.1 Courier-imap 4.1.1
I can not get imapd.rc to start when the system comes up. imapd.rc is in /usr/local/etc/rc.d/ /etc/rc.conf contains imapd.rc_enable="YES" I can start authdaemon and sqwebmail this way, but not imapd.rc....???? If I execute imapd.rc manually, everything seems to work fine. TIA Bernard Higonnet ...

Matlab doesn't start after upgrading system (gcc 3.4.5 -> 4.1.1 ) on gentoo
Hi,i have recently upgrade my system but i when i try to run matlab i have: *** glibc detected *** /usr/local/matlab704/bin/glnxa64/MATLAB: malloc(): memory corruption: 0x0000000000597610 *** ======= Backtrace: ========= /lib/libc.so.6[0x2ba6ebfb341d] /lib/libc.so.6[0x2ba6ebfb539a] /lib/libc.so.6(calloc+0x96)[0x2ba6ebfb6816] /lib64/ld-linux-x86-64.so.2[0x2ba6ea82355a] /lib64/ld-linux-x86-64.so.2(_dl_allocate_tls+0xe)[0x2ba6ea82361e] /lib/libpthread.so.0(pthread_create+0x49d)[0x2ba6eb9fc8bd] /usr/local/matlab704/bin/glnxa64/libmwservices.so[0x2ba6ead98bd7] /usr/local/matlab704/bin/glnxa64/lib...

Changing (1,2,3,4,5...) to (1,1,2,2,3,3,4,4,5,5...)
Hi All, I have a column vector of numbers that I would like to extrapolate by "doubling up": e.g. turn 2 4 6 8 into: 2 2 4 4 6 6 8 8 any ideas on an easy vectorised way to do this? TIA, Rob v=repmat([2; 4; 6; 8].',2,1); v=v(:) "Robert Barrie" <askme@ifuwant.com> wrote in message <hlt7kp$rut$1@fred.mathworks.com>... > Hi All, > > I have a column vector of numbers that I would like to extrapolate by "doubling up": > > e.g. turn > 2 > 4 > 6 > 8 > > into: > 2 > 2 > 4 > 4 > 6 > 6 > 8 >...

Newbie question; why (cons (list 1 2) (list 3 4)) is ((1 2) 3 4) and not ((1 2) (3 4))
Hi, I just started to learn LISP, and stumbled in SICP upon (cons (list 1 2) (list 3 4)) is evaluated to ((1 2) 3 4) I do not understand why this is not: ((1 2) (3 4)) because (cdr (cons (list 1 2) (list 3 4))) is (3 4) and (car (cons (list 1 2) (list 3 4))) is (1 2) Is there a logical explanation? Thank you for your patience. -- Greg Out of order, gregor <gregor@ediwo.com> writes: > Is there a logical explanation? Yes. > I just started to learn LISP, and stumbled in SICP...

Looking For SunOS 4.1.3 Or 4.1.4
Gentlemen: I am looking to buy a license of SunOS 4.1.3 Or 4.1.4. for a software backward compatibility testing project. I have talked to Sun sales and they no longer offer the product. Dose anyone have an old one they would like to sell? I will also cover all shipping and packaging costs to the San Jose, CA area. Thanks for the help. Thomas Dineen (408) 956-0539 (O) (408) 838-3376 (C) tdineen@ix.netcom.com Thomas Dineen wrote: > Gentlemen: > > I am looking to buy a license > of SunOS 4.1.3 Or 4.1.4. for a > software backward compatibility > testing pro...

Porting FreeBSD 4.11 kernel to BSD/OS 4.3.1
Is this possible to do? Has anyone tried it? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God Queen and country! Beware Anti-Christ rising! >>>>> "TD" == The Doctor <doctor@doctor.nl2k.ab.ca> writes: Hi, TD> Is this possible to do ? What exactly ? - Running FreeBSD 4.11 kernel as a userland task in bsd/os ? - Running FreeBSD 4.11 binaries in bsd/os ? - Running bsd/os userland on top of a FreeBSD 4.11 kernel ? - Running bsd/os binaries on top of a FreeBSD 4.11 kernel ? - Anything else ? �ric Masson -- Member - Liberal TD> International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God TD> Queen and country! Beware Anti-Christ rising! -- Oh que non, je ne suis pas juriste. Mais j'aimerais bien voir la t�te du magistrat si Jean Dupont se pointe pour porter plainte avec le print d'un post de "Colargol" intitul� "Bozo Le Clown est une raclure" -+- GS in <http://www.le-gnu.net> + Du rififi chez les neuneux -+- In article <86u0nms13t.fsf@srvbsdnanssv.interne.kisoft-services.com>, Eric Masson <emss@free.fr> wrote: >>>>>> "TD" == The Doctor <doctor@doctor.nl2k.ab.ca> writes: > >Hi, > > TD> Is this possible to do ? > >What exactly ? >- Running FreeBSD 4.11 kernel as a userland task in bsd/os ? >- Running FreeBSD 4.11 binaries in bsd/os ? >-...

build jdk 1.3.1 or 1.4.1 on freebsd 5.1-release :(
Hi, I'm not able to build sun java jdk 1.3.1 on FreeBSD 5.1 release, here is the error message: ===> Applying FreeBSD patches for jdk-1.3.1p8_2 ===> jdk-1.3.1p8_2 depends on executable: gm4 - found ===> jdk-1.3.1p8_2 depends on executable: zip - found ===> jdk-1.3.1p8_2 depends on file: /usr/X11R6/lib/libXm.so - found ===> jdk-1.3.1p8_2 depends on executable: msgfmt - found ===> jdk-1.3.1p8_2 depends on file: /usr/local/diablo-jdk1.3.1/bin/javac - not found ===> Verifying install for /usr/local/diablo-jdk1.3.1/bin/javac in /usr/ports/java/d...

1/4 to 4/4
TblCustomer CustomerID CustomerName TblOrder OrderID CustomerID OrderDate From the above tables, how do I write a query that returns the following for each customer: CustomerA Order 1/4 CustomerA Order 2/4 CustomerA Order 3/4 CustomerA Order 4/4 Where CustomerA is the customer name, Order is text, CustomerA placed 4 orders and the orders are sequenced by OrderDate in chronological order. Thanks! Carl Carl, you could use a pair of subqueries to count how many orders there are in total for the customer, and which one this is. You would type something like this into the Field row in qu...

4.2.1-RC1 on FreeBSD 4.11 doesn't seem to discipline the local clock
I've got a Soekris 4501 (three actually) running FreeBSD 4.11. I just added a modem to pickup ACTS with, and discovered that ntp in base FreeBSD isn't compiled with it as a valid refclock? So, I pulled down the 4.2.1 release candidate, configured with just --enable-acts, and gave it a shot. The clock just slowly drifted away from it's peers and ACTS. Up to this point, using base ntpd from FreeBSD and multiple internet sources (and it's 3 local peers I maintain) it has stayed within 10ms, I cut the cord when it drifted out past 150ms this evening. Should I be using ...

/noend -noend -persist don't work on XP (3.7, 4.0, 4.1, 4.2)
I'm trying to run wgnuplot (3.7, 4.0, 4.1, and 4.2) on XP from the command-line but the plot window won't stay. I've tried everything that I've found: wgnuplot /noend test.plt wgnuplot -noend test.plt wgnuplot -persist test.plt wgnuplot test.plt /noend wgnuplot test.plt -noend wgnuplot test.plt -persist and the same with pgnuplot. Every time it's the same thing, the window flashes and disappears. If I use a different term it outputs the file just fine. I'm sure it's something stupid that I'm missing, but I can't seem to find it. c....

Xfce 4.4 beta 1 (4.3.90.1) released
http://www.xfce.org I loaded it using this binary installer (configures and builds inside a GUI wrapper): http://www.xfce.org/archive/xfce-4.3.90.1/installers/xfce4-4.3.90.1-installer.bin It's pretty nice, and includes a better-working version of Terminal (including a pretty nifty translucence/image feature), and a new file manager called Thunar, which I haven't yet tried. The taskbar app has been folded into the panel app, which itself now supports more than one panel, and each panel can be pared down to a single item, and be made freely movable. The desktop now supports icons (a...

Installing php 5.1.4 and Postgresql 8.1.3 on redhat Centos 4.3
I want to upgrade php 4.3.9 and postgresql 7.4.13 on Centos 4.3 to php 5.1.4 and postgresql 8.1.4 using rpms. Has anyone done this? rich wrote: > I want to upgrade php 4.3.9 and postgresql 7.4.13 on Centos 4.3 to php > 5.1.4 and postgresql 8.1.4 using rpms. Has anyone done this? nope, i use debian.. apt makes it a way easier. but just download the rpms, untar gunzip ect then ./configure ..yadda yadda it comes with instructions you know! Flamer. ...

krb5-1.4.1 runtime problem on FreeBSD 5.4
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm still having the following problem, which I reported here the other day: After building krb5-1.4.1 on my FreeBSD 5.4-RELEASE system, making sure to compile with -DEAI_NODATA=EAI_NONAME so the compile succeeds, I get this symptom when I run the new kinit and kadmin clients: Assertion failed: (k5int_i->did_run != 0), function krb5int_initialize_library, file krb5_libinit.c, line 60. Abort (core dumped) I then built 1.4.1 on a Solaris system and I don't have the problem. I also rebuilt 1.3.4 on my FreeBSD box and it's w...

verifiing 8.1.7.4.1 upgrade to 8.1.7.4.x
I have upgraded our test 8.1.7.4.1 database to 8.1.7.4.13. I would like to verify this fact. In the readme it does state that all the products will not display the version number 8.1.7.4.13, because it's a cummulative patch. I would like to see at least one file with the version number greater than 8.1.7.4.1 querying the database, v$instance still yields 8.1.7.4.1 Any ideas? thanks Try (might need as SYS) column comp_name format a35 column status format a20 column version format a11 select comp_name, status, substr(version,1,10) as version from dba_registry order by comp_name; ...

Freebsd 4.4 --> 4.8
I have been feeling good using 4.4 release for a long time before the motherboard upgrade. After the upgrade I have to re-install a newer 4.8 release for my hardware (SIS748+963L, SIS900 Lan, SIS7012 sound, Geforce 5200) on the same old HDD, I have previously got 500MB partition for 4.4 and I run X, netscape, realplayer on it. I've 4.8 detects my onboard Lan, sound but it's too bloated for 500MB partition. I want to know if I can install linux 6.1 package and XFree86 3.36 for it?? Also, I have an ad1 hd with an extended fat32 partition I can't mount in freebsd 4.8 usin...

ACE 5.4.2 + TAO 1.4.2 client, ORBacus 4.1.2 NameService, and JACOrb 1.4.1 servants
Hi everyone, Background: ----------- I'm very new to CORBA, ACE & TAO. I'm trying to integrate with a 3rd party system which exposes a CORBA object model to clients. This system is composed of JACOrb 1.4.1 servers registering with an ORBacus 4.1.2 NameService. We've got existing software that uses ACE 5.4.2, and the 3rd party documentation mentions that people have used TAO (no version specified) previously to integrate with their system, so I'm trying out TAO 1.4.2 as a natural solution to the problem. Environment Specifics: ---------------------- - AC...

100,000 + ((4 + 6 + 9 + 1 + 5 + 8 + 3 + 3 + 4) * 1000)) +1,000
1010101010101010101010101010101010101010101010101010101 010 0 101 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 2 0 0 0 0 0 3 0 0 0 0 0 4 0 0 0 0 0 5 0 0 0 0 0 6 0 0 0 0 0 7 0 ...

[tao-users] Strange warning when updating from tao 1.4.4 to 1.4.8
Hi all, I'm using TAO 1.4.8 on WinXP Pro SP2 32 Bits using VC7.1. I updated my build environement from 1.4.4 to 1.4.8. This has been without any bother, but now when I start my app, I have this warning: 3544 -- 20051224-00:00:40 3 ACE_DLL::open failed for TAO_PI: Error: check log for details. 3544 -- 20051224-00:00:40 3 Unable to find service: ORBInitializer_Registry Aa far as I know, I'm not using portable interceptors, so why TAO tries to load this PI.dll ?? Here is the initialization parameters I use (unchanged since the 1.4.4 build): // Setup ...

krb5-1.4.1 build failure on FreeBSD 5.4 (EAI_NODATA), and a workaround
I'm getting a krb5-1.4.1 build failure on FreeBSD 5.4-RELEASE: ..../krb5-1.4.1/src/lib/krb5/os/hst_realm.c: In function `krb5int_translate_gai_error': ..../krb5-1.4.1/src/lib/krb5/os/hst_realm.c:370: error: `EAI_NODATA' undeclared (first use in this function) ..../krb5-1.4.1/src/lib/krb5/os/hst_realm.c:370: error: (Each undeclared identifier is reported only once ..../krb5-1.4.1/src/lib/krb5/os/hst_realm.c:370: error: for each function it appears in.) I believe this is partially due to autoconf, which is (correctly) detecting getaddrinfo in FreeBSD 5.4, and hence not bu...

Defect Report: 8.3.1/1, 8.3.4/1: description ignores precedence
[ Moderator's note: Forwarded to C++ committee. -sdc ] 1. Consider the declaration "char *arr[01]". Take "char" for T, "*arr[01]" for D. 1.1. Take "arr[01]" for D1 to match the assumptions. T D1 resolves to "char arr[01]" and the type of identifier "arr" in T D1 is "array of 1 char" according to 8.3.4/1. Therefore the type of identifier "arr" is " array of 1 pointer to char". This is counterintuitive: an array is defined in the section "Meaning of pointers". 1.2. Take &...

RE: [tao-users] Strange warning when updating from tao 1.4.4 to 1.4.8
Hi, Please always use the PRF form. Some of the TAO libraries itself use ORBInitializers and PI (for example PortableServer and Messaging). Because of that it can be that the libraries are searched. If you don't need portable interceptors, the best is to disable that then during compilation, that will reduce footprint and improve performance. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: owner-tao-users@cse.wustl.edu > [mailto:owner-tao-us...

(??] [4/4]
begin 644 Untitled2.txt ,2&5L;&\@07-I82$A ` end Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com ...

UnixWare 7.1.4 and MySQL-4.1.12 and 4.1.X downloads.
Hello, For any one that tried to download mysql-4.1.11 or mysql-4.12 for UnixWare 7.1.X I am sorry. I messed up the permissions. I placed the binaries on the ftp server but forgot to check the permissions on the files. I have now fixed them. Sorry for the inconvience. Please note that UnixWare 7.1.12 needs the Berkeley DB libraies found at ftp://ftp.zenez.com/pub/zenez/prgms/bdb-4-mysql-4.1.12-uw7.tar.gz These need to be gunzip, gmake install, and a LD_LIBRARY_PATH added to use them. An other option is once you have installed them you can create a link from them to /usr/lib/. This version does fail one test the KILL test. I have included the messages from the failure for you information. kill [ fail ] Errors are (from /home/mount/zensco/local/zenez/build/mysql-4.1.12/mysql-test/var/log/mysqltest-time) : /home/mount/zensco/local/zenez/build/mysql-4.1.12/client/.libs/mysqltest: At line 31: query 'select 1' succeeded - should have failed with errno 2006... /home/mount/zensco/local/zenez/build/mysql-4.1.12/client/.libs/mysqltest: At line 41: Result length mismatch (the last lines may be the most important ones) Below are the diffs between actual and expected results: ------------------------------------------------------- *** r/kill.result Fri May 13 15:04:03 2005 --- r/kill.reject Tue May 31 09:38:47 2005 *************** *** 6,12 **** 0 kill @id; select 1; - Got one of the listed errors select ((@id :=...

Install Problem with BSD 4.1/4.4
Hi Guys, just a quick question trying to install bSD 4.4 on a Digital 3000 Box (P200MMX) for no apparent reason. system boots from cd ok, then just freezes on the install screen. (where choose std, custom etc installs). I have to press reset or switch off to do anything. Same thing happens on a another old compaq 4200 PPro200. anyone got any suggestions? Cheers, i have downloaded 4.8, but haven't tried it yet. i might try and boot from floppy install and download via the net and see what happens. ne1 else who has any ideas they would be appreciated :) chee...

Web resources about - Jedit 4.1 on FreeBSD 4.8 and Diablo-JDK1.3.1 - SIGILL 4 - won't start - comp.unix.bsd.freebsd.misc

Bug ID: JDK-6378911 UTF-8 decoder handling of byte-order mark has changed
Component: core-libs - Sub-Component: java.nio.charsets

Resources last updated: 2/27/2016 4:33:44 PM