f



Running 2 PPPoE connections connecting to the same PPPoE server.

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi

I've two ADSL connections from the same ISP. I'm currently using Ubuntu
Linux (Dapper/AMD64) to distribute internet traffic from those two ADSL
connections in my small network. This works fine with no problems. I use
load balancing[1] available in Linux Advanced Routing & Traffic Control
HOWTO. To connect to my ISP, I've to initiate PPPoE connection from server.

Now, I've a FreeBSD (7.0-RELEASE-BETA3/AMD64) box, on which I'm thinking to
transfer this setup. When I dial 1st PPPoE connection, it succeeds. When I
dial 2nd PPPoE connection, it terminates with following error:

- ---->8---->8----
ppp[1583]: tun1: Warning: iface add: ioctl(SIOCAIFADDR, x.x.x.x -> a.a.a.a):
File exists
ppp[1583]: tun1: Error: ipcp_InterfaceUp: unable to set ip address
- ----8<----8<----

The error is probably due to same gateway (a.a.a.a) assigned to both PPPoE
connections by the PPPoE server. Am I correct ?

And is there any other way, I can have this configuration ?

References:
[1] - http://lartc.org/howto/lartc.rpdb.multiple-links.html#AEN298

TIA
- -- 
Ashish Shukla आशीष शुक्ल                      http://wahjava.wordpress.com/
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFHRvkOHy+EEHYuXnQRAk+oAKDhCR9/K9MoRkNqLgBT6MkkIla26wCeNovw
iGqCTZKV3axX1xqHt30iciA=
=jx44
-----END PGP SIGNATURE-----
0
Ashish
11/23/2007 4:00:10 PM
comp.unix.bsd.freebsd.misc 13187 articles. 1 followers. Post Follow

4 Replies
848 Views

Similar Articles

[PageSpeed] 21

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Ashish Shukla आशीष शुक्ल wrote:
> Hi
> 
> I've two ADSL connections from the same ISP. I'm currently using Ubuntu
> Linux (Dapper/AMD64) to distribute internet traffic from those two ADSL
> connections in my small network. This works fine with no problems. I use
> load balancing[1] available in Linux Advanced Routing & Traffic Control
> HOWTO. To connect to my ISP, I've to initiate PPPoE connection from server.
> 
> Now, I've a FreeBSD (7.0-RELEASE-BETA3/AMD64) box, on which I'm thinking to
> transfer this setup. When I dial 1st PPPoE connection, it succeeds. When I
> dial 2nd PPPoE connection, it terminates with following error:
> 
> ---->8---->8----
> ppp[1583]: tun1: Warning: iface add: ioctl(SIOCAIFADDR, x.x.x.x -> a.a.a.a):
> File exists
> ppp[1583]: tun1: Error: ipcp_InterfaceUp: unable to set ip address
> ----8<----8<----
> 
> The error is probably due to same gateway (a.a.a.a) assigned to both PPPoE
> connections by the PPPoE server. Am I correct ?
> 
> And is there any other way, I can have this configuration ?
> 
> References:
> [1] - http://lartc.org/howto/lartc.rpdb.multiple-links.html#AEN298
> 
> TIA
Hello,
This can be changed in the ppp conf, I would think that making two
seperate conf files and loading each one, then using routed to route the
two together. Bit ugly but would work. Reading the docs i'm sure you can
have two seperate nets working as one, but how pppd works is you need to
compile in some netgraph modules and redo the conf so it tends to listen
on a ethernet card rather a modem com port. Think you know this

Hope this helps some.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.4-svn0 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org

iD8DBQFHXevPyMQ6IBehNNMRAp+DAJ9e7RKeWH09/q4QrrzZD6LzVoFbEwCfdkuv
i+tJeecVnRyJ8ZHDeHiBCpQ=
=dquF
-----END PGP SIGNATURE-----
0
chris
12/11/2007 3:30:22 AM
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

chris petrik wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Ashish Shukla आशीष शुक्ल wrote:

[...]

>> ---->8---->8----
>> ppp[1583]: tun1: Warning: iface add: ioctl(SIOCAIFADDR, x.x.x.x ->
>> a.a.a.a): File exists
>> ppp[1583]: tun1: Error: ipcp_InterfaceUp: unable to set ip address
>> ----8<----8<----
>> 
>> The error is probably due to same gateway (a.a.a.a) assigned to both
>> PPPoE connections by the PPPoE server. Am I correct ?
>> 
>> And is there any other way, I can have this configuration ?
>> 
>> References:
>> [1] - http://lartc.org/howto/lartc.rpdb.multiple-links.html#AEN298
>> 
>> TIA
> Hello,
> This can be changed in the ppp conf, I would think that making two
> seperate conf files and loading each one, then using routed to route the
> two together. Bit ugly but would work. Reading the docs i'm sure you can
> have two seperate nets working as one, but how pppd works is you need to
> compile in some netgraph modules and redo the conf so it tends to listen
> on a ethernet card rather a modem com port. Think you know this

Thanks for the reply, but tell me one thing. If I'm not able to up my 2nd
PPPoE interface (which will be tun1) which means no 2nd route, then what'll
be the use of using routed.

I've already mentioned this why I'm not able to dial another pppoe
connection, because gateway assinged to me in both PPPoE connection is
same.

> 
> Hope this helps some.

Thanks
- -- 
Ashish Shukla आशीष शुक्ल                      http://wahjava.wordpress.com/
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFHX4m9Hy+EEHYuXnQRAgrBAJ9iwPAAtwa0gzBmcttyevra6pjfnACgsVRL
Q9yxA2ovkArDghRCjXxRKjM=
=fCat
-----END PGP SIGNATURE-----
0
Ashish
12/12/2007 7:11:53 AM
Ashish Shukla आशीष शुक्ल wrote:

[snip] 
>>> ---->8---->8----
>>> ppp[1583]: tun1: Warning: iface add: ioctl(SIOCAIFADDR, x.x.x.x ->
>>> a.a.a.a): File exists
>>> ppp[1583]: tun1: Error: ipcp_InterfaceUp: unable to set ip address
>>> ----8<----8<----
>>> 
>>> The error is probably due to same gateway (a.a.a.a) assigned to both
>>> PPPoE connections by the PPPoE server. Am I correct ?
>>> 
>>> And is there any other way, I can have this configuration ?
>>> 
>>> References:
>>> [1] - http://lartc.org/howto/lartc.rpdb.multiple-links.html#AEN298
>>> 
>>> TIA
>> Hello,
>> This can be changed in the ppp conf, I would think that making two
>> seperate conf files and loading each one, then using routed to route the
>> two together. Bit ugly but would work. Reading the docs i'm sure you can
>> have two seperate nets working as one, but how pppd works is you need to
>> compile in some netgraph modules and redo the conf so it tends to listen
>> on a ethernet card rather a modem com port. Think you know this
> 
> Thanks for the reply, but tell me one thing. If I'm not able to up my 2nd
> PPPoE interface (which will be tun1) which means no 2nd route, then
> what'll be the use of using routed.

routed is for RIP traffic with LAN/WAN routers. If you're not exchanging RIP
you don't need it.

> I've already mentioned this why I'm not able to dial another pppoe
> connection, because gateway assinged to me in both PPPoE connection is
> same.
> 
[snip]

I don't have any recent direct experience with it but you may want to
investigate mpd. IIRC it was the preferred solution with regard to the
multiple interface PPPoE route. YMMV. See /usr/ports/net either mpd4 or
mpd5.

-Jason
 
0
Jason
12/12/2007 8:40:08 AM
On Wed, 12 Dec 2007 08:40:08 +0000, Jason Bourne wrote:

[snipped]
 
> I don't have any recent direct experience with it but you may want to
> investigate mpd. IIRC it was the preferred solution with regard to the
> multiple interface PPPoE route. YMMV. See /usr/ports/net either mpd4 or
> mpd5.

Tried mpd, but its also not able to add a route via same gateway for
second connection. But I find a hack. And that will be so simple, provided
one has knows how PPP works, and routing via gateway works.

In PPP, there is no need of ARP, since both endpoints know about each
other at the time of PPP connection negotiation. And in routing via
gateway, no packet is send every to gateway's IP address, instead
packets are sent to its link-layer address. So, if one is able to change
IP address of the remote endpoint of the next PPP connection, OS will be
happy to add a route for that PPP connection also, and changing IP address
of remote endpoint of the PPP connection doesn't had any effect on PPP
connection, since that IP address is never going to be used in destination
packets (unless one really wants to send packets destined to the gateway).

So after mpd is running with 2 PPPoE connections (ng0 and ng1), with ng0
assigned an IPv4 address but ng1 is not, since OS doesn't allow adding
2 routes via same gateway, so ng1 is simply idle. So what I did is
manually set parameters of ng1 with 'ifconfig', and set IP address
of 'remote endpoint' to a another IP of ISPs network. And this worked
fine.

Now all I need to do is to load-balance over these connections.

> 
> -Jason

I hope my above reasoning is correct, in case its not please point me
where I'm wrong.

Thanks for the points. TIA for any corrections.
-- 
Ashish Shukla आशीष शुक्ल                      http://wahjava.wordpress.com/
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --

0
UTF
12/13/2007 8:49:11 AM
Reply:

Similar Artilces:

How to -- PPPoE with my ADSL Connection to connect internet with CentOS 5
Hi! I had tried PPPoE with my ADSL Connection to connect internet with CentOS 5. Downloaded from http://www.roaringpenguin.com/en/penguin/openSourceProducts/rpPppoe It's a dual boot system with windows 2000 & CentOS, while internet working with windows 2000 perfectly. from centOS it's not even blinking of my MODEM ROUTER, WHICH I CONNECTED THROUGH RJ-45 LAN port. I am listing the steps but any how I am not able to connect with internet. Please show me path! 1. first I had test ifconfig eth0 >> OUTPUT comes like eth0 Link encap:Ethernet HWaddr 00:14.................. inet6...

How to -- PPPoE with my ADSL Connection to connect internet with CentOS 5
Hi! I had tried PPPoE with my ADSL Connection to connect internet with CentOS 5. Downloaded from http://www.roaringpenguin.com/en/penguin/openSourceProducts/rpPppoe It's a dual boot system with windows 2000 & CentOS, while internet working with windows 2000 perfectly. from centOS it's not even blinking of my MODEM ROUTER, WHICH I CONNECTED THROUGH RJ-45 LAN port. I am listing the steps but any how I am not able to connect with internet. Please show me path! 1. first I had test ifconfig eth0 >> OUTPUT comes like eth0 Link encap:Ethernet HWaddr 00:14........

Cisco pppoe client can connect multiple pppoe sessions
I have a Cisco 1600 series router that is being used as a an internet gateway to a DSL internet service. I am running IP/FW/NAT. Several fixed NAT entries are forwarded to internal servers using interface DIALER 1 as the primary internet interface. We have several fixed IP addresses according to the dialup profile and using PAP authentication. The combination of username/password determines the IP address assigned at connect time. Current router situation | internal LAN | -10.0.0.1 (e0) --- (e1)-> Dialer 1 (pppoe) IP1 = 172.16.0.1 ---> INTERNET ...

SAS/Connect to Unix Server #2
I'm hoping someone can help me out. I am running EG on windows, connecting = to a Unix server. I have tried a variety of combinations to try to get SAS/= Connect to work, but I keep hitting a brick wall. Unfortunately I don't have a very helpful SAS admin so I've had to source a= ll the below information the sneaky way! I don't even have access to the se= rver (apart from a dodgy browse function in SAS DI, but even then it won't = allow me to open any specific files). %LET sashost=3Dserver.company.com.au; <I've obtained this by doing a ping o= n the serve...

Windows server, Unix client, connection refused on client connect.
Hi I developed a client-server application. //**************** client(UNIX) **************** // connect with timeout: // 1. set socket NONBLOCKING // 2. connect with timeout using select // 3. set socket to BLOCKING againg int my_connect(int sockremote, long sock_addr, short port, int timeout) { int res; struct sockaddr_in addr; long arg; fd_set myset; struct timeval tv; int valopt; socklen_t lon; addr.sin_family = AF_INET; addr.sin_port = htons(port); addr.sin_addr.s_addr = sock_addr; // Set non-blocking if( (arg = fcntl(sockremote, F_GETFL, NULL)) < 0) { ...

Java, "Connection refused: connect"
I've been happily playing away with my client/server program for most of this weekend. I decided earlier today to take it to the next step and try running it on two machines. ....Boy did that not go over well. The funny thing is, I did everything I could possibly thing of to make the program real-network-ready. But then I got this: -=- java.net.ConnectException: Connection refused: connect at java.net.PlainSocketImpl.socketConnect(Native Method) -=- Not descriptive, but okay, I did a google for this, and got hundreds of: "That error means you don't have a server run...

Re: SAS/Connect to unix server #2
Ester, If you are going to create the macro variable MYRMT, you have to reference it with an ampersand in front of it. This is standard procedure for referencing macro variables in SAS, and has nothing to do with your remote connection. OPTIONS REMOTE=&myrmt Jack Jack Clark Senior Research Analyst phone: 410-455-6256 fax: 410-455-6850 jclark@hilltop.umbc.edu University of Maryland, Baltimore County Sondheim Hall, 3rd Floor 1000 Hilltop Circle Baltimore, MD 21250 Confidentiality Notice: This e-mail may contain information that is legally privileged and that is intended only f...

Error creating multiple PPPoE connections on FreeBSD
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I was running FreeBSD 6.2-RELEASE-p7 (amd64) when this problem occured to me. I've two ADSL links to my ISP on which I'm trying to create two PPPoE connections. My first connection is created successfully. But when I dial for second connection, pppd terminates with an error, that it's not able to add the route corresponding to the 2nd PPPoE connection to the routing table. The IP gateway assigned over the PPPoE connections to me is same for both connections. When I tried this in GNU/Linux (Fedora 7), it worked fine. I've got both connections running fine simultaneously. Can anybody tell me, what's the problem in case of connecting in FreeBSD ? Sorry, I'm unable to post any logs or messages regarding this problem, as my FreeBSD box crashed few days ago. TIA Ashish Shukla - -- http://wahjava.wordpress.com/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) iD8DBQFHHa7OHy+EEHYuXnQRAgN9AKCkY7pDWoeNsS+VdttWTV+zAIjlJACdGKN0 bpIK9VB3yJMF+t0o1Cr6LwM= =3y90 -----END PGP SIGNATURE----- ...

10.2 "connect to server" won't stay connected
Using go->connect to server seems to work on occasion, not sure if my server is moody, but I can connect sometimes. Regardless, if my 10.2 G4 goes to sleep, my server connection is gone and I have to reconnect. Can this connection remain permanent? Does this seem to be a server issue and not a Mac issue? thanks, anthony In article <f0a79190.0402271255.4a2dd4e6@posting.google.com>, ajc1961@yahoo.com (anthony) wrote: > Using go->connect to server seems to work on occasion, not sure if my > server is moody, but I can connect sometimes. Regardless, if my 10.2 > G4 goes...

Is DNS Causing Me To Run Slow On Servers With Many TCP Connections/What to do? #2
Hello,=20 I'm trouble shooting the following problem.=20 Briefly, my application runs fast on one server and runs slow on many other= s. I'm trying to figure out how to get everything to run fast. The applicat= ion is an Instant Messaging program. =20 When I look at DNS, I see that all the root hints (Windows defaults) are to= non-existant computers (on my internet) and there are no entries on the fo= rwarding tab. All the servers have the same hints and forwarding entries. =20 Using "netstat" I determined that there are only a few TCP connection on th= e fast...

connect a database in remote server (can connect to the server via SSH)
Hi, All: My perl code need to connect to a database (MySQL) in remote server, and I can login that server via SSH. I am a new to perl, can anyone give me a hint how can I do that. Many thanks. Xiaoyu zhangxiaoyu912@gmail.com wrote: > My perl code need to connect to a database (MySQL) in remote server, > and I can login that server via SSH. You don't need to have ssh access to the remote database server in order to be able to connect to the database (at least if the database server is configured to wait for remote connections). > I am a new to perl, can anyone give me a hint h...

Web Server connecting to Informix Server #2
I am running an OLTP system with Informix 7.3 IDS on HPUX. We are considering writing some web interfaces to connect to the database. At first we mirrored the database tables to a web server so that no one was ever touching live data. This was relatively easy, just do a nightly export/import to the web server. However, we now wish to create some "updating" web pages that will connect back to the server. On the web server I am using PHP/MySQL/Apache for web development with the Slackware Linux v 9.0 (Linux 2.4.7) distrobution. I have tried multiple times to install the L...

Is the server running locally and accepting connections on Unix domain socket /tmp/.s.PGSQL.5432 ?
On Mandrake, I launched the script creer-base under the user postgres, I had an error message : you need to use createlang to load the language into the database. When I've run the command under the user postgres : createlang -d auth pltcl I had an error message : createlang: could not connect to auth database : could not connect to server : No such file or directory Is the server running locally and accepting connections on Unix domain socket /tmp/.s.PGSQL.5432 ? Can you reply to me, please. -- ___________________________________________________________ Sign-up...

Connection to the server is closed immediatedly after connect
ACE VERSION: 5.4 HOST MACHINE and OPERATING SYSTEM: SuSE linux 9.0(32 bit) TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): g++ 3.3.1 CONTENTS OF $ACE_ROOT/ace/config.h: ln -sf $ACE_ROOT/ace/config-linux.h $ACE_ROOT/ace/config.h CONTENTS OF $ACE_ROOT/include/makeinclude/platform_macros.GNU (unless ln -sf $ACE_ROOT/include/makeinclude/platform_linux.GNU $ACE_ROOT/include/makeinclude/platform_macros.GNU AREA/CLASS/EXAMPLE AFFECTED: ACE compilation itself.(installation) DOES TH...

windows server not connecting to BIND 9 server #2
Hi: I've got a local subnet (192.16.1.x) that's NAT'd behind a firewall. I've got a BIND 9.2.3 server running on RH9...it's on 192.168.1.200 I've got a Win2K server on 192.168.1.202 The NS is accessible to the outside world. I've set up two views, one for the 192.x.x.x machines and one for the outside world. When I query the NS from another box on the subnet, it correctly resolves the local IPs for various domains. The Win2K server, however, can't seem to get through to the NS. If I set the local NS in the TCP/IP properties and do an nslooku...

RE: Web Server connecting to Informix Server #2
John Assuming you have IDS running on your web server you don't need anything else to communicate between the two engines apart from setting up the sqlhosts, /etc/services and .rhosts (/etc/hosts.equiv) files. You can then update any tables from either engine. (Both databases need to have the same logging state). To make names easier you might want to use synonyms or views. Keith -> -----Original Message----- -> From: Wilson, John [mailto:JWilson3@troy.k12.mi.us] -> Sent: Wednesday, September 03, 2003 5:31 PM -> To: informix-list@iiug.org -> Subject: Web ...

Permanent connection between a LINUX server and a UNIX AIX server
Hello, I created, for a customer LAMBDA, a Intranet site with PHP and MySQL technology. This site is on a LINUX server. I wish to connect this LINUX server on a UNIX server to directly access to the FILES present on the disk. I am not the supplier of system IBM of my customer LAMBDA. I am service provider for this customer LAMBDA. Environment of the UNIX server : -------------------------------- - Computer IBM RISC 6000 Under-dimentionned! - SYSTEM UNIX AIX 4.3 - No database engine - No SSH port - No FTP port - Only a Telnet port - 10 clients connected in permanence to the server with stron...

Permanent connection between a LINUX server and a UNIX AIX server
Hello, I created, for a customer LAMBDA, a Intranet site with PHP and MySQL technology. This site is on a LINUX server. I wish to connect this LINUX server on a UNIX server to directly access to the FILES present on the disk. I am not the supplier of system IBM of my customer LAMBDA. I am service provider for this customer LAMBDA. Environment of the UNIX server : -------------------------------- - Computer IBM RISC 6000 Under-dimentionned! - SYSTEM UNIX AIX 4.3 - No database engine - No SSH port - No FTP port - Only a Telnet port - 10 clients connected in permanence to th...

Permanent connection between a LINUX server and a UNIX AIX server
Hello, I created, for a customer LAMBDA, a Intranet site with PHP and MySQL technology. This site is on a LINUX server. I wish to connect this LINUX server on a UNIX server to directly access to the FILES present on the disk. I am not the supplier of system IBM of my customer LAMBDA. I am service provider for this customer LAMBDA. Environment of the UNIX server : -------------------------------- - Computer IBM RISC 6000 Under-dimentionned! - SYSTEM UNIX AIX 4.3 - No database engine - No SSH port - No FTP port - Only a Telnet port - 10 clients connected in permanence to the server with stron...

OS X 10.6.2 / Eudora 6.2.4
Hi, I have never done this before and I am just about desperate to get eudora functioning again. I have used eudora for @15 years and it suits my needs perfectly. Although I have had issues in the past something occurred in mid-November which I have not been able to resolve and, in the process, messed up some settings. No one that I know knows how to correct this so I am hoping one of you might. So, around mid-November I suddenly was not able to send an e-mail using eudora. One of the error messages I keep getting is "Server not responding. 706". Another is "...

Router and PPPoE Connection
Hi.....here is basically what I've done so far. Much like my cable modem, I followed the Linksys documentation for model number BEFSR41 which basically said to connect each PC to the router, connect the router to the modem, plug in the router, plug in the modem then press the reset button on the router (that was the short version of course). I did that and I can actually get an internet connection with the computer which has the PPPoE sofware installed on it. The trouble is, from what I've read sofar, you need to uninstall any PPPoE software on all computers if you want to...

Connect To Server #2
Some networks I connect to open as a Place in the sidebar while others open in a new Finder window eg. my university network. Is this based on the protocol I'm connecting with e.g. ftp, webdav? Maybe I'm beng stupid, but if I Connect To Server and the volume opens in a window how can I add it as a Place to the sidebar? Thanks! ...

PPPoE connection timeout
Hello, we use a PIX 515E-RDMZ to protect our network. The outside interface is directly connected to the providers DSL-modem (t-online). We have no problem to establish the pppoe connection, our problem is, that the connection never goes down. We have no flat rate, so we are depend on an accurate connection management. How can I say the PIX, that it shell disconnect after an idle-time of e.g. 5 minutes. Is this possible or is it better to implemet this function with a external DSL-Router? Thank you for your help! Holger holger.wiedel@ehret.de (HoWi) wrote in message news:<39ed303a.03110...

automatic pppoe connection
For a long time, I have had my pppoe (rp-pppoe-3.5-2) connection come up automatically when my computer starts up, as part of the network startup script in RedHat 9.0. Recently, the network script stopped being able to bring up the ppp connection automatically. I started logging messages to syslog, and I see this: Aug 3 21:03:12 watchtower network: Bringing up interface ppp0: failed Aug 3 21:03:17 watchtower pppd[415]: LCP: timeout sending Config-Requests Aug 3 21:03:17 watchtower pppd[415]: Connection terminated. Aug 3 21:03:21 watchtower pppoe[416]: Timeout waiting for PADO packe...

Web resources about - Running 2 PPPoE connections connecting to the same PPPoE server. - comp.unix.bsd.freebsd.misc

Connection - Wikipedia, the free encyclopedia
Text is available under the Creative Commons Attribution-ShareAlike License ;additional terms may apply. By using this site, you agree to the ...

iMedia Connection: Interactive Marketing News, Features, Podcasts and Video - iMediaConnection.com
If you send more email, you might make more money. Then again, you might destroy your reputation and revenue stream. Here's how to know what ...

HTTP persistent connection - Wikipedia, the free encyclopedia
... tacked on to an existing protocol. If the browser supports keep-alive, it adds an additional header to the request: Following this, the connection ...

CareerSonar Turns Facebook Friends Into Job Connections
Looking for a job ? Among your Facebook friends lies the potential for employment. CareerSonar , a new service, brings together a person’s connections ...

Anchorage man arrested in connection with January armed robberies
Police say a 24-year-old Anchorage man has been arrested in connection with two armed robberies and one attempted robbery at the end of January. ...

Igniting Brand Growth Via Emotional Connections
Nobel Prize winning research in neuroscience and behavioral economics proves that all humans are irrational, emotional creatures. Both marketers ...

Did machete-wielding Ohio suspect have radical connections? - Videos - CBS News
... investigators, including possibly the FBI and Joint Terrorism Task Force are looking into whether a brutal rampage in Ohio had any connection ...

Deadpool Really Did Have A Major Connection To Marvel And The Avengers, Here's How
The Deadpool movie was full of a ton of Marvel related easter eggs, literally more than we could count. Most of them were obvious, a few were ...

Second teenage boy arrested in connection with TalkTalk hack
The 16-year-old was arrested in west London on Thursday, and has since been released on bail.

Larch Corrections Center’s father-daughter dance a time for connection
YACOLT Fathers wearing ties, suspenders and suit jackets wandered around the gymnasium, anxiously awaiting their daughters' arrival. As the girls ...

Resources last updated: 2/24/2016 11:09:43 AM