How to use ALPS GlidePoint touchpad in Xorg 7.3 (in FreeBSD 7.0-RELEASE (amd64)) ?
=2D----BEGIN PGP SIGNED MESSAGE-----
I'm having a ALPS GlidePoint touchpad on my HP Compaq Presario A920EE
notebook. I've installed FreeBSD 7.0-RELEASE (amd64) and Gentoo Linux (amd6=
it. In Xorg running in Gentoo Linux, I'm able to use scrolling
functionality of touchpad in Xorg in Gentoo, but not in Xorg in
FreeBSD. Tapping works fine.
Follwoing is my xorg.conf:
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice...Xorg 7.2 on FreeBSD/ppc?
Hello, is anybody out there running Xorg 7.2 on FreeBSD / ppc?
I have a G4 that runs current:
root@kg-g4# uname -a
FreeBSD kg-g4.kg4.no 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Sat Jul 14
23:57:02 CEST 2007 email@example.com:/usr/obj/usr/src/sys/GENERIC
I have almost done the Xorg upgrade to 7.2. Almost because xorg-server
(and xorg-server-snap) fails:
cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include
-I../../../include -I../../../include -I../../../include
-I../../../include -I../../../include -I../../../include -D_VM86_LINUX
-DHAVE_XORG_CONFIG_H -...FreeBSD 7.0
I've just installed 7.0 on my laptop. I'm trying to setup ACPI.
Everytime I resume the laptop (Dell Latitude D620) the laptop reboots.
Does anyone have any suggestions or hints? Thanks.
...[FreeBSD 7.0-BETA1] strange behavior in hostname resolving order
To Whom It May Concern: (Cc'ed firstname.lastname@example.org)
Usually i prefer 6to4(stf(4)) to 6over4(gif(4)) because some
tunnel providers like to limit bandwidth too musch. So until my
upstream ISP give me native ipv6 addresses (it's take long time maybe),
i'm going to use 6to4 instead of 6over4 continuous.
Here is my shot using 6to4:
bh@viola:~> uname -a
FreeBSD viola.izb.knu.ac.kr 7.0-BETA1 FreeBSD 7.0-BETA1 #0:
Fri Nov 2 12:13:10 KST 2007
bh@viola:~> ifconfig rl0 | grep 2002
inet6 2002:9be6:9d5d:2:20b:6aff:fe56:969f prefixlen 64 autoconf
bh@viola:~> ping6 -c 5 mx.jp.freebsd.org.
2002:9be6:9d5d:2:20b:6aff:fe56:969f --> 2001:218:422:1::15
16 bytes from 2001:218:422:1::15, icmp_seq=0 hlim=49 time=225.297 ms
16 bytes from 2001:218:422:1::15, icmp_seq=1 hlim=49 time=224.591 ms
16 bytes from 2001:218:422:1::15, icmp_seq=2 hlim=49 time=237.175 ms
16 bytes from 2001:218:422:1::15, icmp_seq=3 hlim=49 time=230.540 ms
16 bytes from 2001:218:422:1::15, icmp_seq=4 hlim=49 time=224.681 ms
--- mx.jp.freebsd.org ping6 statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 224.591/228.457/237.175/4.889 ms
bh@viola:~> traceroute6 mx.jp.freebsd.org.
traceroute6 to mx.jp.freebsd.org (2001:218:422:1::15) from
2002:9be6:9d5d:2:20b:6aff:fe56:969f, 64 hops max, 12 byte packets
1 2002:9be6:9d5...gnuplot with png/jpeg on FreeBSD 4.9 or FreeBSD 4.7
I cannot get gnuplot 4.0.0 made with gd/jpeg/png support. This was not
a problem on 3.7 on the same FreeBSD 4.7/4.9 machines.
I tried the options --with-gd=/usr/local/lib and
--with-gd=/usr/local/lib but no success, all png and gd options in
../configure report "checking for ... no".
All libgd and libpng, libjpeg can be found in /usr/local/lib and all
required header files can be found in /usr/local/include. Gnuplot is
made but always without png/jpeg support.
lutz <email@example.com> wrote:
> I cannot get gnuplot 4.0.0 made with gd/jpeg/png suppor...can't get desired xorg resolution with FreeBSD 7.0
I have a laptop with a Radeon Mobility card on which I've been running
FreeBSD 6.2 with Xorg 7.2 using a 1024x768 resolution. On a different
slice of the same laptop, I installed FreeBSD 7.0/Xorg 7.3. With the same
xorg.conf, X is coming up with a 1400x1050 resolution, which is too fine
for my eyes.
A google search led me to think that setting the desired resolution could
be done using xrandr, but the command:
xrandr --fb 1024x768
gives an error message:
xrandr: specified screen 1024x768 not large enough for output LVDS \
The contents of /etc/X11/xorg.conf:
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Load "extmo...[News] Review of the New FreeBSD 7.0; Vietnam Has BSD/Linux Mirrors
First look at FreeBSD 7.0
,----[ Quote ]
| So would FreeBSD 7.0 make a decent desktop system? I haven't run it long
| enough to be able to answer the question, but from my initial testing I would
| be perfectly happy to give it a more intensive try. It certainly looks like a
| nicely crafted system, with extreme attention to detail - at least when it
| comes to the kernel and userland.
Ubuntu Mirror returns to the Vietnam BSD/Linux Mirror
,----[ Quote ]
| The Ubuntu Mirror has returned to the Vietnam BSD/Linux Mirro...FreeBSD 7.0 Firefox 2.0 Acroread7
I recently installed FreeBSD 7.0
FreeBSD Gargoyle.brendhanhorne.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0:
Thu Jun 19 16:33:43 EDT 2008
firefox-22.214.171.124_1,1 Web browser based on the browser portion of Mozilla
and acroread and the wrapper
acroread7-7.0.9_3,1 Adobe Reader for view, print, and search PDF documents
acroreadwrapper-0.0.20080110 Wrapper script for Adobe Reader
I have a sym link for the nppdf.so file
Gargoyle# ln -s /usr/lib/Adobe/Acrobat7.0/Browser/intellinux/nppdf.so
And then I used the wrapper to get the plugins going
$ nspluginwrapper -v -a -i
Auto-install plugins from /usr/X11R6/lib/browser_plugins
Looking for plugins in /usr/X11R6/lib/browser_plugins
Auto-install plugins from /usr/X11R6/lib/firefox/plugins
Looking for plugins in /usr/X11R6/lib/firefox/plugins
Auto-install plugins from /usr/X11R6/lib/linux-mozilla/plugins
Looking for plugins in /usr/X11R6/lib/linux-mozilla/plugins
Install plugin /usr/X11R6/lib/linux-mozilla/plugins/nphelix.so
Install plugin /usr/X11R6/lib/linux-mozilla/plugins/libflashplayer.so
Install plugin /usr/X11R6/lib/linux-mozilla/plugins/mplayerplug-in-dvx.so
Install plugin /usr/X11R6/lib/linux...FreeBSD 7.0 + apache 1.3.41 + php 5.2.8 = fail
I've come across a problem that's appeared on the internet for years, usually linux
users, no posts explain the cause or solution.
The system is plain 7.0 release installed from the boot only CD and installed over
[root@bsd7 ~]# uname -a
FreeBSD bsd7.crowhost.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52
UTC 2008 firstname.lastname@example.org:/usr/obj/usr/src/sys/GENERIC i386
Next, apache 1.3.41 is installed. Pardon the history file numbers, but this is as
generic as it gets for a rough install:
tar xvfz apache_1.3.41.tar.gz
./configure --prefix=/opt/apache_1.3.41 --enable-module=so
this looks good. Apache runs.
Now for the PHP
./configure --prefix=/opt/php-5.2.8 --with-apxs=/opt/apache_1.3.41/bin/apxs
--with-mysql --enable-zip --with-openssl
a few of the tests fail, but I've never seen them all pass on any system.
the correct module is instaled by apxs into
Now we start apache:
root@bsd7 ~]# /opt/apache_1.3.41/bin/apachectl start
Syntax error on line 205 of /opt/apache_1.3.41/conf/httpd.conf:
Cannot load /opt/apache_1.3.41/libexec/libphp5.so into server:
/opt/apache_1.3.41/libexec/libphp5.so: Undefined symbol "ap_user_id"
/opt/apache_1.3.41/bin/apachectl start: httpd could not be started
WTF is this error?
I can repeat this err...FreeBSD 8.0, Xorg 7.4 and Intel core i3 cpu with integrated graphics
I recently installed FreeBSD 8.0-stable on a new machine. The machine
has a Intel Core i3-540 cpu, with a "integrated crahics controller" of
root@kg-v7# pciconf -lv | grep -A 3 vga
vgapci0@pci0:0:2:0: class=0x030000 card=0x83831043 chip=0x00428086
vendor = 'Intel Corporation'
class = display
subclass = VGA
I installecd Xorg (7.4_1).
When I did 'X - configure', it selected the 'vesa' driver for Xorg.
(--) PCI:*(0:0:2:0) 8086:0042:1043:8383 Intel Corporation Core Processor
Integrated Graphics Controller rev 18, Mem @ 0xfb800000/4194304,
0xd0000000/268435456, I/O @ 0x0000dc00/8, BIOS @ 0x????????/65536
II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 32704 kB
(II) VESA(0): VESA VBE OEM: Intel(R)Ironlake Desktop Graphics Chipset
Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(R)Ironlake Desktop Graphics
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
Is vesa the best driver for this machine?
I tried the 'intel' driver, but that didn't work.
On Mar 10, 5:12=A0am, Torfinn Ingolfsen <ti...@start.no> wrote:
> I recently installed FreeBSD 8.0-stable on a new machine. ...Upgrading to freebsd 7.0
I have an AMD64 Sun V20z running FreeBSD 6.3-STABLE and would like to
upgrade it to 7.0. I can't afford to have it down for very long and if
there is some problem with the upgrade, I'll need to fall back to 6.3.
Currently it is mirrored using geom mirror. What I'd like to do is take
one disk off line while I upgrade the other disk to 7.0. If there are
no problems after testing, I can then re-attach the off line mirror
otherwise in case of a problem, I can boot off 6.3.
I'm not sure how to do this with gmirror and was hoping to get some help
here with the commands. Here is the current configuration:
# cat /boot/loader.conf
/dev/mirror/gm0s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/mirror/gm0s1f on /home (ufs, local, soft-updates)
/dev/mirror/gm0s1e on /usr (ufs, local, soft-updates)
/dev/mirror/gm0s1d on /var (ufs, local, soft-updates)
/dev/md0 on /tmp (ufs, local, soft-updates)
procfs on /proc (procfs, local)
devfs on /var/named/dev (devfs, local)
# gmirror status
Name Status Components
mirror/gm0 COMPLETE da0
Is this reasonable?
a) # gmirror deactivate gm0 da1
b) upgrade da0 to FreeBSD 7.0 with required boots
c) Testing ok on FreeBSD 7.0 -
# gmirror gm0 activate da1
Now if testing is not ok, how do I boot back to da1 making it the active
component in the mirror and if...FreeBSD 7.0 portupgrade
What can be wrong with it?
[root@pimposh ~]# portsnap fetch && portsnap update
[root@pimposh ~]# portupgrade -a
** Makefile possibly broken: lang/php5:
/usr/local/sbin/portupgrade:1433:in `get_pkgname': Makefile broken
from /usr/local/sbin/portupgrade:622:in `main'
from /usr/local/sbin/portupgrade:613:in `each'
from /usr/local/sbin/portupgrade:613:in `main'
from /usr/local/sbin/portupgrade:588:in `catch'
from /usr/local/sbin/portupgrade:588:in `main'
from /usr/local/lib/ruby/1.8/optparse.rb:1303:in `call'
from /usr/local/lib/ruby/1.8/optparse.rb:1303:in `parse_in_order'
from /usr/local/lib/ruby/1.8/optparse.rb:1299:in `catch'
... 6 levels...
from /usr/local/lib/ruby/1.8/optparse.rb:785:in `initialize'
from /usr/local/sbin/portupgrade:229:in `new'
from /usr/local/sbin/portupgrade:229:in `main'
On Wed, 05 Mar 2008 09:40:31 +0100, aaaa wrote:
> What can be wrong with it?
> [root@pimposh ~]# portsnap fetch && portsnap update [root@pimposh ~]#
> portupgrade -a
> ** Makefile possibly broken: lang/php5:
> /usr/local/sbin/portupgrade:1433:in `get_pkgname': Makefile broken
>...bind 9.6.3 crashing on Freebsd 7.3
This is a multi-part message in MIME format.
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
running bind 9.6.3 installed from ports on Freebsd 7.3 (amd64)
Getting this error in my local log
10-Feb-2011 21:12:13.711 general: rbtdb.c:1506: INSIST(((unsigned int)((&(node)->references)->refs)) == 0&& node->data == ((void *)0)) failed
10-Feb-2011 21:12:13.711 general: exiting (due to assertion failure)
Anyone else run into this? Any pointers on where to look for more info
...FreeBSD 7.0 and wep
I am currently running FreeBSD 7.0 on a thinkpad T42. I have recently
placed a D-link DI-514 wireless router. It currently only offers WEP
protection. The Dlink is set for dhcpd. So I should just be able to grab
an ip. I also set the WEP key in the d link.
I read http://www.freebsd.org/doc/en/books/handbook/network-wireless.html
and created /etc/wpa_supplicant.conf:
wep_key3=111111111 <----- Just example
So here is what happens when I try to connect.
[9:44am] Gargoyle[root@/root] >wpa_supplicant -i ath0 -c
Trying to associate with 00:00:00:00:00:00 (SSID='network_name'
Associated with 00:00:00:00:00:00
CTRL-EVENT-CONNECTED - Connection to 00:00:00:00:00:00 completed (auth)
and it just sits there.
if I bring up ifconfig ath0 in another terminal.
[bhorne@Gargoyle:bhorne, 09:47 AM, Thu Oct 09]>ifconfig ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
ssid network_name channel 6 (2437 Mhz 11g) bssid 00:00:00:00:00:00
authmode OPEN privacy ON deftxkey 4 wepkey 4:40-bit txpower 31.5
bmiss 7 scanvalid 60 bgscan bgscanintvl...MATLAB 7.0 on FreeBSD 6.0 : Java problems
I managed to install MATLAB 7 on a FreeBSD 6.0 machine...(reading the
hanbook notes about this subject)
When I start MATLAB its logo appears but then it just freezes (with top
command I see it uses ~99% of CPU)..
in the console I see it generates this logfile : Opening log file:
the log file looks like this :
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# Java VM: Java HotSpot(TM) Client VM (1.4.2_02-b03 mixed mode)
# Error ID: 4F533F4C494E55580E43505001C9
Heap at VM Abor...HFS+ on FreeBSD 7.3
I'm desperately trying to migrate a Mac OS X installer to a smaller
system. The current installer is very basic: it is a Mac OS X system
that boots on an external drive and run a script that creates 3
partitions on the local disk, then restore DMGs on them, and finally set
the boot flag to the correct partition.
Technically, it is hdiutil (or diskutil) to create the partitions, asr
to restore DGMs, and bless to take care of the boot.
On of the DMGs is also a full Mac OS X system. The result is a very
heavy installer (even if we removed most of the useless stuffs).
I can build a very light FreeBSD system (using m0n0wall or FreeNAS
projects) but I will need HFS+ support.
I successfully compiled gpt fdisk to create partitions on a GPT drive.
Now I have to create the filesystem and manage the DMGs. I saw that
hfsutils can handle them, or they can be converted to IMGs. But I am not
able to find a suitable tool to create an HFS+ filesystem (even non
GEOM_APPLE has been removed. The hfs port is ultra deprecated. Linux has
a lot of working tools to handle HFS+ (read and write on non-journaled).
There are also source codes from Apple. But I can't find anything for
Does anyone have a clue?
On 2010-07-21, Orena Radrax <email@example.com> wrote:
> I'm desperately trying to migrate a Mac OS X installer to a smaller
> system. The current installer is very basic: it is a Mac OS X s...FreeBSD 7.0 and laptops
I cannot Install FreeBSD amd64 on HP PAvilion dv9310ca .
Any other issues?
Member - Liberal International
This is firstname.lastname@example.org Ici email@example.com
God, Queen and country! Beware Anti-Christ rising!
Time for the U.S.A. to vote on a referendum to dissolve its nation!
The Doctor wrote:
> I cannot Install FreeBSD amd64 on HP PAvilion dv9310ca .
> Any other issues?
Why you can't?
Do you receive errors?
Please visit my website: http://www.kuschelbaerchen.net
...[Fwd: [FreeBSD-Announce] FreeBSD Foundation Announces Native Support for Java JDK 1.3.1 on FreeBSD]
Here's an interesting message posted to the freebsd-announce mailing
list. Couple of questions:
1. I built Sun's 1.3.1 JDK from source, using the latest patchset
available from http://www.eyesbeyond.com/freebsddom/java/ . Is the
result the same as the binaries that are now available from the FreeBSD
2. Why is FreeBSD a registered trademark of Wind River Systems? I
thought they divested themselves of FreeBSD.
-------- Original Message --------
Subject: [FreeBSD-Announce] FreeBSD Foundation Announces Nati...Dual Boot FreeBSD 7.0
Is it possible to dual boot FreeBSD 7.0 and Linux?
> Is it possible to dual boot FreeBSD 7.0 and Linux?
...freebsd 7.0 mtpfs not working
i have a fresh install of 7.0 and would like to access my mp3player. i have
installed fusefs-kmod, fusefs-libs, libmtp and mtpfs. when i plug the player
in i see:
ugen0: <Philips Philips SA9XXX GoGear, class 0/0, rev 2.00/1.40, addr 2> on uhub3
i then do:
df -k shows the filesystem mounted with 0 blocks and 100% capacity.
when i try and ls or cd to the directory, i see this in the logs:
pid 3574 (mtpfs), uid 0: exited on signal 11 (core dumped)
is there any configuration steps i'm missing?
craig yuen <firstname.lastname@example.org>
...FreeBSD 7.2B1 + xorg problems
I installed 7.2B1 and had some problems:
The disk has 3 partitions:
ad6s1 ca. 25GB, home, usr, etc. (freebsd install 1)
ad6s1 ca. 25GB, home, usr, etc. (freebsd install 2)
ad6s2 ca. 900 GB, data with things that I want to keep over a OS change.
On s1 I have 7.1B2, then installed 7.2B1 on s2 (I alternate upgrading
slices so I usually have a working system with X running to search for
fixes to problems, unless happens below, I had a separate disk with 7.0
that I used at first to recover the lost disklabel, see below).
The disklabel program wanted to use slice 1 too, I removed all
autoallocation and entered settings by hand on ad6s2.
PROBLEM 1: Rebooting saw slice 1's disklabel wiped out.
The data was still there, I could recover it using scan_ffs and
filling in the numbers (take sizes *4 in the disklabel file for bsdlabel
-R, because of 2048 blocks).
PROBLEM 2: Xorg: X -configure hangs. Using the output it already wrote
and inserting my previous xorg.conf data for monitor/modelines, I could
start X with a window manager etc. but no mouse movement/keyboard input
(Well, I could at least use CTRL+ALT+Fn)
I read on the net about an option to be put in xorg.conf:
option "AllowEmptyInput" "off"
in the section ServerLayout. That worked.
X is a lot faster on my geforce 6600 now in some situations, comparable
to 6.x as in 7.0/71 it was slow on websites with graphics overlays
(picture 'popups'...freebsd 7.0 + qemu networking
I'm trying to link virtual machine with real one. Everything seems
must work, but don't ..
_ping 192.168.255.254 has no replies_ . tcpdump shows reqest and
reply with correct seq numbers
[HOST] tap0 (192.168.255.253/255.255.255.252) < ------ >
qemu -hda /tank/tools/qemu/linux.img -m 64 -net nic,vlan=0 -net
ifconfig tap0 192.168.255.253 netmask 255.255.255.252 up
metric 0 mtu 1500
inet 192.168.1.250 netmask 0xfffff800 broadcast 192.168.7.255
media: Ethernet autoselect (100baseTX <full-duplex>)
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
inet 192.168.255.253 netmask 0xfffffffc broadcast
Opened by PID 827
tcpdump -i tap0
17:06:13.154720 IP 192.168.255.253 > 192.168.255.254: ICMP echo
request, id 23811, seq 25, length 64
17:06:13.155534 IP 192.168.255.254 > 192.168.255.253: ...[News] FreeBSD 7.3 Updated
-----BEGIN PGP SIGNED MESSAGE-----
FreeBSD 7.3 Updates BSD Legacy
,----[ Quote ]
| The FreeBSD Release Engineering Team this
| week put out the FreeBSD 7.3 release which
| is about four months after FreeBSD 8 was
| FreeBSD is known as a solid, stable and
| reliable open source operating system. It
| should come as no surprise then that many
| users of FreeBSD don't jump to the next
| major version number right when it becomes
| available, but rather stay with the legacy
| version for a while.
http://blog.internetnews.com/skerner/2010/03/freebs...Diskless booting on FreeBSD-7.0 ?
I am trying to get my notebook diskless booted from FreeBSD-7.0.
I am sure that the same notebook booted fine from 6.x.
Now the last lines of the boot sequence (va PXE) read (with either
custom or GENERIC kernel):
Trying to mount root from nfs:192.168.0.29:/home/DISKLESS
fxp0: link state changed to UP
Afterwards the system hangs. I tried with/out ACPI etc.
BTW: My real intention is, to get my i386 MacMini booted diskless.
Any direct hints to this problem are welcome, too.
Dipl.-Math. Wilhelm Bernhard Kloke
Institut fuer Arbeitsphysiologie an der Universitaet Dortmund
Ardeystrasse 67, D-44139 Dortmund, Tel. 0231-1084-257
On Sun, 25 Nov 2007 12:13:50 +0000 (UTC),
W.B. Kloke <email@example.com> wrote:
> I am trying to get my notebook diskless booted from FreeBSD-7.0.
> I am sure that the same notebook booted fine from 6.x.
So, the obvious question that pops up is: what changed between six and
seven? I haven't paid attention to the differences yet since my 6.2
setup works fine and 7.0 has not been released yet -- you're probably
running 7.0-BETA3 that as such is not unlikely to have problems.
A quick look at the 7.0 TODO list reveals an interesting ``TCP issues''
item, under the ``Major issues for 7.0-RELEASE'' heading. What it me...