f



Got Subversion 1.4.6 working on SCO Openserver 5.0.6, woo-hoo!

So it's working. I'd like to get it into one of the repositories, such
as http://www.aljex.com/bkw/sco/index.html or into what's left of
Skunkware.

Does anyone have working tools for building VOL packagas? Or can I
send my notes along to one of you repository managers to compile and
provide the package?
0
nkadel (705)
2/29/2008 2:13:22 PM
comp.unix.sco.misc 3925 articles. 0 followers. Post Follow

0 Replies
909 Views

Similar Articles

[PageSpeed] 28

Reply:

Similar Artilces:

SCO OpenServe 6.0.0 Filesystem MUCH Faster Than 5.0.6
The speed of the SCO OpenServer 6.0.0 filesystem is quite noticeably faster than I enjoyed on OpenServer 5.0.6. How do I know? I donno, but it feels and seems so. I didn't expect this, so I didn't make these tests while still on 5.0.6, but I KNOW I have a lot more files and directories on 6.0.0 than I did on 5.0.6. The Verify of my Last Master Backup shows what is on my systen: 255191 files were encountered 167 files were excluded 9 files were not checked because the hard disk file had been modified by a program since it was backed up 2 files were not checked for various reasons 28870 special files (links, directories, devices, etc.) 226143 files verified successfully Master Backups using LONE-TAR(tm) to DVD+RW media ran at about 70-75 MB/min on OSR 5.0.6 but run at 175+ MB/min on 6.0.0, and if I turn off compression run at 260+ MB/min. To see how long it takes to search for a non-existant file: [trebor] ~: time find . -name XPMNYTRE real 0m58.59s user 0m1.72s sys 0m10.96s And to see how many directories had to be read: [trebor] ~: find . -type d | wc -l 23745 Bob -- Bob Stockler +-+ bob@trebor.iglou.com +-+ http://members.iglou.com/trebor Author: MENU EDIT II - The BEST Creator/Editor/Manager for filePro User Menus. Fully functional (time-limited) demos available by email request (specify OS). On Fri, Nov 25, 2005 at 11:01:36AM -0500, Bob Stockler wrote: > The speed of the SCO ...

NFS SCo 5.0.5 with SCO 6.0.0
Hi everybody, I have a folder on SCO 5.0.5 server shared through NFS with a new SCO 6.0.0 with MP2 server (converted from a SCO 5.0.6 version). Before conversion file locks (over network) on this folder works well (eg from server SCO 5.0.6 I was able to see locks generated from SCO 5.0.5 box and viceversa), now with SCO 6.0.0 does not work ! I see that on SCO 6.0.0 the lockd daemon is active .. so it should work ... Please can you help me ? Thanks Cuffiette ...

RE: [ace-users] ACE+TAO+CIAO
Hi, Please use the prf form and which configuration you build. I personally think you have an old version of ACE/TAO on the system that is used. Regards, Johnny > -----Original Message----- > From: owner-ace-users@cse.wustl.edu > [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of Domingos Monteiro > Sent: donderdag 9 juni 2005 18:05 > To: Simon McQueen > Cc: ace-users@cs.wustl.edu > Subject: Re: [ace-users] ACE+TAO+CIAO - 5.4.6 + 1.4.6 + 0.4.6 released > > Hi, > > I've just dowloaded this version > I've started to compile ACE with > - MSVC 7.1 > - Win XP > And get the following link errors: > > Message_Block.obj : error LNK2005: "public: virtual void __thiscall > ACE_Deadline_Message_Strategy::convert_priority(class ACE_Time_Value > &,class ACE_Message_Block const &)" > (?convert_priority@ACE_Deadline_Message_Strategy@@UAEXAAVACE_T > ime_Value@@ABVACE_Message_Block@@@Z) > already defined in CDR_Size.obj > Message_Block.obj : error LNK2005: "public: virtual void __thiscall > ACE_Laxity_Message_Strategy::convert_priority(class ACE_Time_Value > &,class ACE_Message_Block const &)" > (?convert_priority@ACE_Laxity_Message_Strategy@@UAEXAAVACE_Tim > e_Value@@ABVACE_Message_Block@@@Z) > already defined in CDR_Size.obj > SString.obj : error LNK2005: "public: __thiscall > ACE_NS_WString::ACE_N...

Sco OpenServer upgrading 5.0.6 to 5.0.7
I need some help. I need to upgrade my Sco O.S.506 to 507 and told me that I need to reinstall all the operative system and not the upgrading of it. Is it true ? Thanks in advance and excuse me if before someone alredy answered this query but I do not find anything about this matter bye Roberto Pineapple typed (on Wed, Apr 07, 2004 at 01:39:46PM +0200): | I need some help. | I need to upgrade my Sco O.S.506 to 507 and told me that I need to reinstall | all the operative system and not the upgrading of it. | Is it true ? No. | Thanks in advance and excuse me if before someone alredy answe...

PwnAge Updated iOS 7.0.6 and 6.1.4 Working Jailbreak and Unlock App for iPhone 5S,5C,5,4S iPad 4
According to Jailbreak Unlock Solutions a new app is available for untethered jailbreak on iPhone 5S/5C/5, iPhone 4/4S and factory unlock for iPhone 4S, iPhone 4 and 3GS for any baseband and firmware up to iOS 7.0, iOS 6.1.4/6.1.3 Latest news on the matter, which held millions of Apple fans in suspense confirm the release of the jailbreak tool v.0.2 via the official website: http://iphonejailbreak-unlock.com which allows iPhone Device owners to jailbreak iOS 7.0.2, iOS 6.1.4/6.1.3 untethered for iPhone 4S, 4, 3GS, and iPhone 5. To Jailbreak and Unlock your iPhone 5s/5/4S/5s iOS 7/6.1.4/6...

SCO Open Server 5.0.6 versus 5.0.4
Hi, Anybody can point me to info or can state if there is a performance improvement from running 5.0.6 versus 5.0.4. Application is database access centered. Regards, Marian news wrote: > Hi, > Anybody can point me to info or can state if there is a performance > improvement from running 5.0.6 versus 5.0.4. Application is database access > centered. I don't think you are going to get a useful answer. Let's assume that I could authoritatively say that 5.0.6 has performance related improvements over .4 in certain areas. I can't recall if it does or doesn't, but the release notes would surely mention any. But so what? What does that say about YOUR application? Do we know where its performance issuees are now? Nope. We could assume it's probably disk bound, because that's a pretty safe assumption most any time, but even if true, what have you done for better or worse in that regard already? Maybe this is an Oracle database and you have it running on a RAID 5 system. As that's usually going to be a bad idea, you could gain nothing even if 5.0.6 did otherwise provide features that would otherwise improve your lot. Maybe you have the whole thing improperly tuned. Maybe you have it so perfectly tuned that an upgrade would make it worse because everything is so critically balanced to what you have now.. There are plenty of good reasons to upgrade to 5.0.6/7. If that's what you are lookimg for (a reason to sell the idea to ...

& # 4 0 ; & # 4 4 3 0 5 ; & # 4 4 2 5 6 ; & # 4 1 ;@��������� ARS���� �����ؿ�@(����)
<HTML> <HEAD> <META content="text/html; charset=ks_c_5601-1987" http-equiv=Content-Type> <STYLE> p, font, span { line-height:120%; margin-top:0; margin-bottom:0; }</STYLE> </HEAD><BODY> <table border="1" width="629" bordercolor="#cccccc" bordercolorlight="#cccccc"> <tr> <td width="619" height="67"> <p align="center"><font face="����"><span style="FONT-SIZE: 11pt"></span></font></p...

& # 4 0 ; & # 4 4 3 0 5 ; & # 4 4 2 5 6 ; & # 4 1 ;��������� ARS���� �����ؿ�(����)
<HTML> <HEAD> <META content="text/html; charset=ks_c_5601-1987" http-equiv=Content-Type> <STYLE> p, font, span { line-height:120%; margin-top:0; margin-bottom:0; }</STYLE> </HEAD><BODY> <TABLE borderColor=#cccccc width=629 borderColorLight=#cccccc border=1> <TBODY> <TR> <TD width=619 height=67> <P align=center><FONT face=����><SPAN style="FONT-SIZE: 11pt"><IMG src="http://www.ezbizi.com/ezbizi/home_img/daechul_01.gif"></SPAN></FONT></P>&l...

Java 1.5 on SCO 5.0.6
Hi, I am trying to get some java programs running on my SCO systems - but they are written for java 1.5 and I can't find any files higher than java 1.3 for 5.0.6. I have tried installing the java 1.5 VOL files for OSR6, and they install through custom alright, but I am getting an error when I try to run 'java' # java -version dynamic linker : java : could not open /usr/lib/libthread.so.1 Killed Can anyone help either get the OSR6 version working on 5.0.6 or does anyone know if there is a version for 5.0.6 Any help would be much appreciated. Thanks, Keith On 13 Jul, 16:17, crym...@gmail.com wrote: > Hi, > > I am trying to get some java programs running on my SCO systems - but > they are written for java 1.5 and I can't find any files higher than > java 1.3 for 5.0.6. > > I have tried installing the java 1.5 VOL files for OSR6, and they > install through custom alright, but I am getting an error when I try > to run 'java' > > # java -version > dynamic linker : java : could not open /usr/lib/libthread.so.1 > Killed > > Can anyone help either get the OSR6 version working on 5.0.6 or does > anyone know if there is a version for 5.0.6 > > Any help would be much appreciated. > > Thanks, > > Keith Keith, Unfortunately Java 1.5 is not supported and will not run on OpenServer 5.0.6. If you want to run Java 1.5 programs you will need to upgrade to OpenServer 6.0.0. John On 17 Jul, 08:...

Looking for precompiled 'rsync" for SCO 5.0.5, 5.0.6 and 5.0.7
I was recommended to use 'rsync' for multi-site transfers. But I have come to find that "rsync" does not exist already in OpenServer 5.0.5, 5.0.6 and 5.0.7. You can only get the "source" files which you "must" compile in order to create the "rsync." These seems to require that you compile these on every level of OpenServer you need. Where / how can I get the 'rsync' binaries already compiled for the levels I need? smlunatick typed (on Tue, Aug 18, 2009 at 11:10:53AM -0700): | I was recommended to use 'rsync' for multi-site transfers. But I have | come to find that "rsync" does not exist already in OpenServer 5.0.5, | 5.0.6 and 5.0.7. You can only get the "source" files which you "must" | compile in order to create the "rsync." These seems to require that | you compile these on every level of OpenServer you need. | | Where / how can I get the 'rsync' binaries already compiled for the | levels I need? Get a binary for OSR 5.0.7, and with oss646c, it should run on 5.0.4, 5.0.5, and 5.0.6. Binary afavilable on Brian White's page at www.aljex.com/bkw. -- JP On Aug 18, 7:37=A0pm, Jean-Pierre Radley <j...@jpr.com> wrote: > smlunatick typed (on Tue, Aug 18, 2009 at 11:10:53AM -0700): > | I was recommended to use 'rsync' for multi-site transfers. =A0But I hav= e > | come to find that "rsync" does not exist already in OpenSer...

[ace-users] ACE+TAO+CIAO
Hi all, We are pleased to announce the latest ACE+TAO+CIAO beta. This beta has been tagged ACE+TAO+CIAO-5_5_6. The main difference between this release and x.5.5 is that the ACE exception macros (except for ACE_THROW_RETURN and ACE_THROW_SPEC) have been removed from all TAO and CIAO code. It is available from the same download location as per the previous release. http://download.dre.vanderbilt.edu/ The doxygen documentation for the beta is also available. Included with this beta, besides the packages combined of sources and generate makefiles, we also provide source only packages for the group of users which use MPC to generate their own makefiles. We encourage you to download the new beta, use it with your applications, and let us know if you encounter any problems. Please use the: $ACE_ROOT/PROBLEM-REPORT-FORM $TAO_ROOT/PROBLEM-REPORT-FORM $CIAO_ROOT/PROBLEM-REPORT-FORM so that we have the proper version/platform/compiler/options you're using to report problems. We also request that you take a look at: $TAO_ROOT/docs/releasenotes/ for the status of various ongoing projects at the DOC groups of WashU, UCI, and Vanderbilt to move ACE+TAO+CIAO forward. Overviews of our recent progress and upcoming plans are available at: $ACE_ROOT/NEWS $TAO_ROOT/NEWS $CIAO_ROOT/NEWS The overall success rates for the test results gathered from all our daily builds is 96% for the ACE tests and 92% for the TAO tests. Please see: http://ww...

MySQL-4.1.13a for OpenServer 6.0.0 and UnixWare 7.1.4
Hello, I have just finished making MySQL-4.1.13a available for OpenServer 6 and UnixWare 7.1.4. This release is for security fixes found and fixed in this release. All prior releases of MySQL-4.1.X have security problems. This release fixes them. -- Boyd Gerber <gerberb@zenez.com> ZENEZ 1042 East Fort Union #135, Midvale Utah 84047 ...

SCO 5.0.5 vs. 6.0
I'm having a new server built: SuperMicro P4SC8 Mother Board Intel P4 3.0Ghz 800 FSB 1GB CPU 73GB 10K 80 PIN SCSI Drive Sony 20/40GB DAT Drive SDT11000/BN DDS4 Adaptec 2010S Card for Mirroring Comtrol Rockport Card 99126-7 Is there any reason I should update my current version of SCO 5.0.5? Frank The following article is a recommendation from SCO when using P4 http://www.sco.com/ta/115963 "FrankS" <fshank@sbcglobal.net> wrote in message news:CqT_f.65026$H71.37215@newssvr13.news.prodigy.com... > I'm having a new server built: > > SuperMicro P4SC8 Mother Board > Intel P4 3.0Ghz 800 FSB 1GB CPU > 73GB 10K 80 PIN SCSI Drive > Sony 20/40GB DAT Drive SDT11000/BN DDS4 > > Adaptec 2010S Card for Mirroring > > Comtrol Rockport Card 99126-7 > > > > Is there any reason I should update my current version of SCO 5.0.5? > > > > Frank > > > > > > FrankS wrote: > I'm having a new server built: > > SuperMicro P4SC8 Mother Board > Intel P4 3.0Ghz 800 FSB 1GB CPU > 73GB 10K 80 PIN SCSI Drive > Sony 20/40GB DAT Drive SDT11000/BN DDS4 > > Adaptec 2010S Card for Mirroring > > Comtrol Rockport Card 99126-7 > > > > Is there any reason I should update my current version of SCO 5.0.5? Frank, OpenServer 5.0.5 is a retired product and is no longer generally supported by SCO. OpenServer 5.0.5 is not designed to work on P4 systems and y...

SYbase SQL & SCO OpenServer 5.0.4/5.0.5
Can somone help me with wich SQL versions runs on SCO OSR5.0.4 and SCO OSR 5.0.5? So your the customer SCO still has :-) Sorry.. Couldn't resist ! ASE 10.0.2 was certified on SCO OSR5.0.2 with OS patches SLS 422a, SLS 437a. It wasn't certified on anything higher. ASE 11.0.x was certified on 5.0.4, but nothing higher. Sybase doesn't support 10.x or 11.x any more ...

i=infinity;0= i*sin k*pi, 1=cos k*pi, k=m/n, n=4,m=0-00; c*G=20=const, 1/sgrt2>G>0.5, 6<N = NA ^2surf/NAvol<7 ; h/N =11=const, e+i*pi; D universe =f(h)*1/ (a))^4, T=f( m, S, D)
Please give me a direction - am I totally lost in my own world and have spent 6 months in vain trying to figure this out, or is there a fruit of truth hidden somewhere? Excuse me for rapid end of some sentences and chaotic appearance of equations- i am just tired. I have spent 1 month practically thinking only about 1 thing. I need some rest and support. On other hand, this chaotically ordered text is good as it will cause confusion and will stretch imagination:) Approximately 50% of the following text is obviously right > 37,5%-is subjective <12,5%- optional Approximately 50% of peop...

SCO 5.0.5/5.0.6 bios clock, time zone and synching
Hi All, Does SCO expect the BIOS clock to be set to UTC? Ive got a few SCO boxen spread across a couple of time zones and at the moment, the bios clocks in the servers are set to localtime not UTC. The timezone settings in SCO Admin are also wrong. I was under the impression *nix always expects the BIOS clock to be set to UTC and then the timezone settings in SCO tell the OS what the local time is. This does not seem to be the case for me. On a testing box, Ive set the BIOS clock to UTC, set the correct timezone in scoadmin but the date command in a root shell still gives the wrong time. E...

SCO Unix 5.0.6, errors
Hi, I am getting the error(s); HTFS: Inode 11915 on HTFS dev hd (1/43) has bad type 000000000000 HTFS: I/O failure occured accessing logical block 477364230 on HTFS dev hd (1/43) and then the system shuts down. Is there any way to fix these? We have done the command 'unix auto' at the Boot: prompt and it goes through its file system checks and appears to correct some problems. We have had some corruption on the database but were able to fix the problems. Our next plan of action is to clone the drive, but if anyone has any other suggestions for a way to fix this issue I would appreciate it. Lori Calkins It would help if you'd provided disk information, such as how many partitions. I'm guessing from what you provided that the problem is on the root partition. By default 5.0.6 doesn't check the root file system on an auto boot. What you're seeing is the file system checks on the rest of the partitions. When you get the Boot: prompt just press enter. Eventually you'll be prompted for the root password to enter maintenance mode. Do that. Then type fsck / Ray Robert Three Star Software Lori wrote: > Hi, > I am getting the error(s); > > HTFS: Inode 11915 on HTFS dev hd (1/43) has bad type 000000000000 > HTFS: I/O failure occured accessing logical block 477364230 on HTFS dev > hd (1/43) > > and then the system shuts down. > > Is there any way to fix these? We have done the command 'unix auto' at >...

FAXing from SCO Unix 5.0.6
I'm supporting a SCO Unix 5.0.6 machine. I don't want to spend $1700 on a "fax server solution". Instead, I'm looking for a fax modem for which there are drivers for SCO or generic enough for Unix in general. I also need "fax software" to enable the whole endeavor. All I'm attempting is what is done quite readily in Windows: print to a psuedo-driver which, in turn, invokes the fax s/w that solicits the phone number to fax to and any other required info. I don't need all kinds of fancy options like choices for cover pages, etc. The application used by my client is strictly text-based - no GUI. Any advice for public-domain - or inexpensive - software to accomplish this is much appreciated. Regards, David On Fri, Apr 18, 2008, David wrote: >I'm supporting a SCO Unix 5.0.6 machine. I don't want to spend $1700 on >a "fax server solution". Instead, I'm looking for a fax modem for which >there are drivers for SCO or generic enough for Unix in general. I also >need "fax software" to enable the whole endeavor. > >All I'm attempting is what is done quite readily in Windows: print to a >psuedo-driver which, in turn, invokes the fax s/w that solicits the >phone number to fax to and any other required info. I don't need all >kinds of fancy options like choices for cover pages, etc. The >application used by my client is strictly text-based - no GUI. &g...

SCO OpenServer 5.0.4/5.0.5 New Daylight Savings dates
Has anyone yet come up with a solution on changing older SCO OpenServer 5.0.4 / 5.0.5 / 5.0.6 systems to accommodate the new daylight savings dates starting this year?? I have looked around at SCO's site and they have an update to install on 5.0.7 systems that also indicate you should install new libc, etc Anyone know how to fix this on older SCO OpenServer releases?? Thanks for any help Scott Ullmann Telespectrum sullmann@telespectrum.com scooter typed (on Mon, Jan 22, 2007 at 12:37:58PM -0800): | Has anyone yet come up with a solution on changing older SCO OpenServer | 5.0.4 / 5.0.5 / 5.0.6 systems to accommodate the new daylight savings | dates starting this year?? | | I have looked around at SCO's site and they have an update to install | on 5.0.7 systems that also indicate you should install new libc, etc | | Anyone know how to fix this on older SCO OpenServer releases?? I'm in the EST timezone, and so I would edit /etc/TIMEZONE from: TZ=EST5EDT to: TZ=EST5EDT,M3,2,0/2,M11,1,0/2 -- JP ==> http://www.frappr.com/cusm <== On Jan 22, 4:24 pm, Jean-Pierre Radley <j...@jpr.com> wrote: > scooter typed (on Mon, Jan 22, 2007 at 12:37:58PM -0800): > | Has anyone yet come up with a solution on changing older SCO OpenServer > | 5.0.4 / 5.0.5 / 5.0.6 systems to accommodate the new daylight savings > | dates starting this year?? > | > | I have looked around at SCO's site and they have an update to install > | on 5.0.7 ...

SCO Openserver 5.0.6 and DAT Tape
I have install a SCSI DAT Tape. I have an error message : tape write error, I have try a tar cvfbke /dev/rct0 20 12000000 . I suppose it is not the tape : the same installation on two servers whith two different DAT gives the same error. Thanks for your answers and GOOD YEAR Eric eric.picabia@tiscali.fr (eric) wrote in message news:<f76c4885.0401010247.194dc8de@posting.google.com>... > I have install a SCSI DAT Tape. > I have an error message : tape write error, > I have try a tar cvfbke /dev/rct0 20 12000000 . > I suppose it is not the tape : the same installation o...

How to change your hostname in SCO OpenServer 5.0.6
So, it may seem obvious to the knowledgeable, but a little knowledge is a dangerous thing. And I'd like to write a note about the booby traps to warn others. * Select your new hostname. It can only have up to 8 characters, and should avoid punctuation, especially periodsy, and should be entirely lowercase to follow the published DNS standards. * Get your new hostname ready in your local DNS and, if necessary, / etc/hosts tables on other machines. * Back up a copy of /etc/hosts and /etc/default/tcp, so you can back out your changes if needed. * Announce downtime for the host: you're going to need a reboot to make sure everything's perfect. * Back up your machine and take any network services offline. * Kiss your X sessions on the machine goodbye. This includes remote X terminals and the "scologin" window at your normal login screen. * Go to a *non-X-displayed* shell prompt. This is because changing the host name in the middle of the X sessions can seriously screw up the X session. * Hit Ctrl-Alt-F1 from the console to get a pure text screen. * Log in as root, or su to be root. * Run the command "netconfig". Note that this non-X based session is considerably more powerful than the X based GUI!!! * Set the new hostname in netconfig. Make sure that the rest of your settings are correct as well. * Allow netconfig to rebuild your kernel and make the new kernel the default. (In my opinion, OpenServer is way, way, way too eager to rebuild kernels!) * ...

SCO Openserver 5.0.6 installation help
Hi, Any body help me for installating the SCO OSR 5.0.6 server in IBM X3400 with Serveraid 8k card. While in the boot time i gave the Boot: link atfter that i gave "aacraid" and insert the floppy at USB floppy driver it start installing then it ask for BTLD floppy, after this step i does not know how to install this. How can i get that BTLD file. Brds Rajesh Far as I know, you can't do USB anything with 506. Need 507 or higher to access USB floppy. Carl On Apr 12, 5:38 pm, C...@eatontown.net wrote: > Far as I know, you can't do USB anything with 506. Need > 507 or higher to access USB floppy. > > Carl Dear Carl, Thanks for your reply, IBM x3400 server doesn't have the floppy drive comptability, is there any other way. Pls tell me. Brds Rajesh On 12 Apr, 15:30, enrajesh.ku...@gmail.com wrote: > On Apr 12, 5:38 pm, C...@eatontown.net wrote: > > > Far as I know, you can't do USB anything with 506. Need > > 507 or higher to access USB floppy. > > > Carl > > Dear Carl, > > Thanks for your reply, > > IBM x3400 server doesn't have the floppy drive comptability, is there > any other way. Pls tell me. Upgrade to OpenServer 6 if you want to install on this system or install on a system that does not have USB if you want to continue to use OpenServer 5.0.6 (which is old and no longer supported). John > On 12 Apr, 15:30, enrajesh.ku...@gmail.com wrote: > > On Apr 1...

High availability on SCO Openserver 5.0.6 ?
Hi, I'm looking for solutions able to give an Informix database hosted on a SCO Openserver 5.0.6 a very high availability (using a double server, RAID and whatever needed). I found a software solution from a company (which name is 1776) by browsing Google answers and mailed them tonight to get more information, but I'm sure there is more than one company being on this market... Any clue of where I could get any others links or information about my concern ? Thanks by advance! Bd typed (on Thu, Dec 16, 2004 at 12:09:36AM +0100): | | I'm looking for solutions able to give an Informix database hosted on | a SCO Openserver 5.0.6 a very high availability (using a double | server, RAID and whatever needed). | | I found a software solution from a company (which name is 1776) by | browsing Google answers and mailed them tonight to get more | information, but I'm sure there is more than one company being on this | market... | | Any clue of where I could get any others links or information about my | concern ? http://www.savwareha.com/ -- JP Hello, Le 15 Dec 2004 18:21:01 -0500, Jean-Pierre Radley <jpr@jpr.com> �crivait: >| Any clue of where I could get any others links or information about my >| concern ? > >http://www.savwareha.com/ Thanks, JP. Sent you a private mail! Regards, ...

AIX 5.1 / VAC 6.0 vs AIX 5.2 / patched VAC 6.0
Hi everybody, I am trying to build some C++ application on the following environment: AIX 5.2 / patched Visual Age C++ 6.0. This application is based on libraries built for the AIX 5.1 / Visual Age C++ 6.0 (base, ie no patch) platform. Compilation works fine. However link results in unresolved symbols (defined in the above libraries). According to IBM support: - AIX 5.1 / Visual Age C++ 6.0 is a supported platform - AIX 5.2 / Visual Age C++ 6.0 with lattest patch is a supported platform - AIX 5.2 / Visual Age C++ 6.00 base version (ie without any patch) isn't a supported platform (!...

Web resources about - Got Subversion 1.4.6 working on SCO Openserver 5.0.6, woo-hoo! - comp.unix.sco.misc

Subversion - Wikipedia, the free encyclopedia
Subversion refers to an attempt to transform the established social order and its structures of power , authority , and hierarchy . Or more specifically, ...

Apple store subversion - Flickr - Photo Sharing!
A bit of fun changing the Safari homepage to Green my Apple at the Regents Street Apple store.

Darius Kazemi, Tiny Subversions - XOXO Festival (2014) - YouTube
Most people are lucky if they finish a couple side projects in a year. Last year, Darius Kazemi released 72, averaging one every five days. His ...

The Last Post Files: Fighting Subversion or Protecting the Government from Embarrassment?
... the government from embarrassment. Toronto writer Paul Weinberg has this exclusive story for J-Source. The Last Post Files: Fighting Subversion ...

Frank Marshall Davis and the Subversion of the Democratic Party
A curious specter will be hovering over the Democratic convention this week. It is the ghost of Frank Marshall Davis, Communist Party USA member ...

Subversion For Sale
We just launched a colorful collection of #Snapbracelets with stimulating quotes by #Weiwei . bit.ly/WfBk74 http://t.co/lE75KUs69W — Friends ...

Subversion- Jimmy Barnes- Danko Jones
RockPile: Subversion- Jimmy Barnes- Danko Jones review: In this latest installment of Rock Pile, Kevin Wierzbicki tells us about the following ...

Infiltration, Subversion, and Sabotage
“Where there is real freedom, there is no State” Our Norwegian correspondent The Observer sends a translated article about the extensive infiltration ...

A Call to Subversion
This blog has repeatedly asserted that the critical front in the Great Islamic Jihad is the struggle within the soul of the West . It is a bitter ...

Are NGOs Agents of Subversion?
Though "Bibi" Netanyahu won re-election last week, the Senate Permanent Subcommittee on Investigations will still look into whether the State ...

Resources last updated: 3/26/2016 11:51:23 AM