f



Re: Audit of Unixware 2.1.3 and SCO 5.7.1.1 machines (fwd)

On Tue, 2 Aug 2005, Steve Button wrote:
> I'm trying to perform an Audit of several Unixware 2.1.3 and SCO
> 5.7.1.1 (yes, really!) and I need to get the commands to grab all the
> info about the systems. This is things like number of disk controllers,
> disks, size of disks, amount of memory, CPUs, software installed, NICs,
> tape drives, volume groups (if approprate).
> 
> Is there a bunch of commands somewhere that I can use to get all this
> info. I've been googling around, and looking through this group for
> some of the morning but I'm not having much luck.
> 
> Have got all the commands / scripts for AIX, Solaris and HP-UX but not
> for SCO.

Take a look at the UnixWare 7 FAQ at

http://www.zenez.com/cgi-bin/ou8faq/faq

How do I document my UW 7 System? (HW, SW...)
http://www.zenez.com/tmp/ou8faqz/cache/248.html

Good Luck,

--
Boyd Gerber <gerberb@zenez.com>
ZENEZ	1042 East Fort Union #135, Midvale Utah  84047
0
gerberb (221)
8/2/2005 1:38:50 PM
comp.unix.sco.misc 3925 articles. 0 followers. Post Follow

0 Replies
555 Views

Similar Articles

[PageSpeed] 21

Reply:

Similar Artilces:

Audit of Unixware 2.1.3 and SCO 5.7.1.1 machines
Hi, I'm trying to perform an Audit of several Unixware 2.1.3 and SCO 5.7.1.1 (yes, really!) and I need to get the commands to grab all the info about the systems. This is things like number of disk controllers, disks, size of disks, amount of memory, CPUs, software installed, NICs, tape drives, volume groups (if approprate). Is there a bunch of commands somewhere that I can use to get all this info. I've been googling around, and looking through this group for some of the morning but I'm not having much luck. Have got all the commands / scripts for AIX, Solaris and HP-UX but not for SCO. Many thanks, Steve Button On 2 Aug 2005 04:06:58 -0700, "Steve Button" <steve0504@pointers-uk.net> wrote: >Hi, > >I'm trying to perform an Audit of several Unixware 2.1.3 and SCO >5.7.1.1 (yes, really!) and I need to get the commands to grab all the >info about the systems. This is things like number of disk controllers, >disks, size of disks, amount of memory, CPUs, software installed, NICs, >tape drives, volume groups (if approprate). > >Is there a bunch of commands somewhere that I can use to get all this >info. I've been googling around, and looking through this group for >some of the morning but I'm not having much luck. > Is version 5.7.1.1 UnixWare 7.1.1? I've never seen Unixware in any form, but on SCO OpenServer there is a command called "hw" which will detail most if not all of what y...

Giving away: Unixware 7.1.0, 7.1.1, 7.1.2 and 7.1.3 media, SDK and updates
I'm cleaning-up and need to give away or throw-out all my unixware media: 7.1.0 - 7.1.3, the software development kit and updates. I've already sold-off the licenses so this is the media only! Please respond to ftarz@mindspring.com if you are interested. You pay the shipping of your choice. ...

[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 3;....;n n n n n]
Hi, Anybody knows how to create this matrix but without using any loops? a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] Thank you. Hana. Hana wrote: > Hi, > Anybody knows how to create this matrix but without using any loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] HELP REPMAT - Randy Hana wrote: > > > Hi, > Anybody knows how to create this matrix but without using any > loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] > > Thank you. > Hana. Hope this isn't homework. >> repmat([1:n]'...

VPN SCO unixware 7.1.3 or 7.1.4
Can anyone point me in the right direction as to setting up a vpn on unixware. Would like to use a basic linksys type router with vpn .. any help or direction would be appreciated "crayzeetrayn" <jpg@jdconsulting-usa.com> wrote in message news:1179533916.151937.241120@h2g2000hsg.googlegroups.com... > Can anyone point me in the right direction as to setting up a vpn on > unixware. Would like to use a basic linksys type router with vpn .. > any help or direction would be appreciated The linksys worked fine for me. Have you read the accompanying help info in the linksys? The only caution that I can give you is use different subnets on each end. Ask specific questions here.... Ron On May 19, 12:46 pm, "Ronald Marchand" <r...@rojomar.com> wrote: > "crayzeetrayn" <j...@jdconsulting-usa.com> wrote in message > > news:1179533916.151937.241120@h2g2000hsg.googlegroups.com... > > > Can anyone point me in the right direction as to setting up a vpn on > > unixware. Would like to use a basic linksys type router with vpn .. > > any help or direction would be appreciated > > The linksys worked fine for me. Have you read the accompanying help info in > the linksys? > The only caution that I can give you is use different subnets on each end. > Ask specific questions here.... > > Ron What linksys router did you use? "crayzeetrayn" <jpg@jdconsulting-usa.com>...

building GCC 3.3.2 or 3.2.3 on Unixware 7.1.1
Has anybody done this successfully? I'm running into problems with the C++ library. AFAICT, the compiler is built ok (bootstrapping all succeeds), but the C++ library chokes. It seems to mostly be complaining about the 'volatile' keyword in pthread.h. I'm using binutils, btw. The ccs based build fails to bootstrap for me. Best regards, Brent Brent Eagles wrote: > Has anybody done this successfully? > > I'm running into problems with the C++ library. AFAICT, the compiler is > built ok (bootstrapping all succeeds), but the C++ library...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

how to "(1-3*x^2)/(1-3*x+x^2+2*x^3) => 1/(1-2*x) + x/(1-x-x^2)"?
hi normal(1/(1-2*x) + x/ (1-x-x^2),expanded); 1/(1-2*x) + x/(1-x-x^2) => (1-3*x^2)/(1-3*x+x^2+2*x^3) how to do the reverse? dillogimp@gmail.com writes: > normal(1/(1-2*x) + x/ (1-x-x^2),expanded); > 1/(1-2*x) + x/(1-x-x^2) => (1-3*x^2)/(1-3*x+x^2+2*x^3) > how to do the reverse? convert(%,parfrac,x); -- Joe Riel ...

1.1.1.1 ?
hi my firewall logs dropped packets from an internal IP address trying to contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid IP? and what is port 9999?? thanks mike wrote: > hi > > my firewall logs dropped packets from an internal IP address trying to > contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid > IP? and what is port 9999?? > thanks These trojans *BlitzNet*, *Backdoor.Oracle*, *Backdoor.Spadeace* uses port 9999 -- S.S. "StarScripter" <Star@privacy.net> wrote in message news:<bv8ejj$p54t3$1@ID-185702.news.uni-berlin.de>... > mike wrote: > > hi > > > > my firewall logs dropped packets from an internal IP address trying to > > contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid > > IP? and what is port 9999?? > > thanks > > These trojans *BlitzNet*, *Backdoor.Oracle*, *Backdoor.Spadeace* uses port > 9999 thanks very much..will check it out ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

Re: [tao-bugs] Increase in IFR Service footprint
Hello again, Something just occurred to me. Version 1.3.1 may have pre-dated some other changes to the IFR that would certainly explain the increase in runtime footprint you are referring to. Back in December, I changed the query dispatch mechanism in the IFR from servant locator to default servant, to optimize the performance. This new mechanism creates 30-odd servants and a POA for each at IFR startup time. This was done last December. Also, regarding the possible memory leaks - these servants and POAs have their lifetimes tied to the IFR, so any Purify checks must shut down the IFR gracefully to be accurate. Sorry for the confusion at first. Jeff "Simon McQueen" <sm@prismtechnologies.com> wrote in message news:<3F2656AB.2050208@prismtechnologies.com>... > TAO VERSION: 1.3.3 > ACE VERSION: 5.3.3 > > HOST MACHINE and OPERATING SYSTEM: > Win 2k > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > Visual C++ 6 SP 5 dynamic debug build. > > AREA/CLASS/EXAMPLE AFFECTED: > Interface Repository > > DOES THE PROBLEM AFFECT: > COMPILATION? > No. > LINKING? > No. > EXECUTION? > Yes. > > SYNOPSIS: > I've been looking at a leak in 1.3.1 for a customer and whilst I was > checking against the latest CVS to see if the fix needed forward porting > I happened to notice that t...

#1 #n+1 #2n+1 #2 #n+2 #2n+2 #3 #n+3 #2n+3 #n #2n #3n #1 #2 #3 #n #n+1 #n+2 #n+3 #2n #2n+1 100 Gbps aggregate stream of 64/66b words virtual lane markers virtual lane 1 virtual lane 2 virtual lan
#1 #n+1 #2n+1 #2 #n+2 #2n+2 #3 #n+3 #2n+3 #n #2n #3n #1 #2 #3 #n #n+1 #n+2 #n+3 #2n #2n+1 100 Gbps aggregate stream of 64/66b words virtual lane markers virtual lane 1 virtual lane 2 virtual lane 3 virtual lane n Simple 66-bit word level round robin distribution Transmit PM Transmit PM Receive PM Receive PM Transmit PC Receive PC 1 0.0 1.0 0.1 0.2 0.3 1.2 1.2 1.1 0.0 1.0 0.1 1.1 2.0 3.0 4.0 6.0 7.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 17.0 18.0 19.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 0.0 0.1 8.0 16.0 5.0 13.0 2.0 10.0 18.0 7.0 15.0 2.1 4.0 12.0 1.0 9.0 17.0 4.1 6.0 14.0 3.0 11.0 19.0 6.1 8.0 5.0 16.0 VL0 VL1 VL2 0.0 1.0 0.1 1.1 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 0.0 1.0 0.1 0.2 0.3 1.2 1.2 1.1 2.0 3.0 4.0 6.0 7.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 17.0 18.0 19.0 8.0 5.0 16.0 VL19 identified and reported. 2:1 0 10 2:1 1 11 2:1 2 12 2:1 3 13 2:1 4 14 2:1 5 15 2:1 6 16 2:1 7 17 2:1 8 18 2:1 9 19 1:2 1:2 1:2 1:2 1:2 1:2 1:2 1:2 1:2 1:2 Transmit P Receive P PMAtor PMAtor PMDoor PMDoor Virtual_Lanes Electrical_Lanes Optical_Lanes Electrical_Lanes begin transit transmit... .... transmitting... ...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #3
Very nice! -Mary ----- Original Message -----=20 From: Toby Dunn=20 To: SAS-L@LISTSERV.UGA.EDU=20 Sent: Friday, October 03, 2008 3:55 PM Subject: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 Data _Null_ ; Length NewString $ 200 ; String =3D '1-10,21,22,30-35,40,41' ; Do I =3D 1 To ( 1 + CountC( String , ',' ) ) ; TempA =3D Scan( String , I , ',' ) ; If Find( TempA , '-' ) Then Do ; Start =3D Input( Scan( TempA , 1 , '-' ) , Best12. ) ; Stop =3D Input( Scan( TempA , 2 , '-' ) , Best12. ) ; Do K =3D Start To Stop ; NewString =3D CatX( ',' , NewString , K ) ; End ; End ; Else Do ; NewString =3D CatX( ',' , NewString , TempA ) ; End ; End ; Put NewString=3D ; Run ; On Fri, 3 Oct 2008 16:27:44 -0400, Paul Walker <walker.627@OSU.EDU> = wrote: >What is the best way to convert a string like 1-10 to a string like >1,2,3,4,5,6,7,8,9,10? The string is stored as a variable in a = datastep. >I am looking for a function that could be called like this maybe. > >data _null_; > string =3D '1-10'; > newstring =3D function(string); >run; > >Add a twist to the puzzle: what if I mixed and matched. For example, = a >string 1-10,21,22,30-35,40,41. > >data _null_; > string =3D '1-10,21,22,30-35,40,41'; > newstring =3D function(strin...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #5
Wow! I didn't know that the do statement could do that! Certainly one = could write code to replace all dashes with a ' to '. =20 -Mary ----- Original Message -----=20 From: Miller, Scott=20 To: Mary ; walker.627@OSU.EDU=20 Sent: Friday, October 03, 2008 4:08 PM Subject: RE: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 i did your approach, mary, except with a slight change in the numbers. = i replaced the - with ' to ' and used a do statement to get the values. = then used a similar sql statement to load those numbers into a macro = var. =20 data z; do x=3D1 to 10,21,22,30 to 35,40,41; output; end; run; Scott D. Miller, MA Evaluation and Informatics Analyst West Virginia Medical Institute (304) 346-9864 ext 2240 Every good scientist should be one part P.T. Barnum and one part B.F. = Skinner. Sumus quid sumus=20 ...and why did I leave the plow in the field, and look for a job in = the town -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU]On Behalf Of = Mary Sent: Friday, October 03, 2008 4:48 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 I'm not sure I can actually do this, but I'll give an approach for = doing it; I think it could be done in a data step or in IML. Maybe = someone else can work out the code! =20 1. Take the original string and form a data set that creates an = observation for ...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #2
I'm not sure I can actually do this, but I'll give an approach for doing = it; I think it could be done in a data step or in IML. Maybe someone = else can work out the code! =20 1. Take the original string and form a data set that creates an = observation for each value between the commas: 1-10,21,22,30-35,40,41 becomes 1-10 21 22 30-35 40 41 2. Take that new data set and search for a dash (using INDEX). If not = found, then output the value. If found, then assign the start value to = the part to the right of the dash, the ending value to the part to the = left of the dash, using SUBSTR. Convert the start and end value to = numeric, then do a do loop with an output, such as: do i=3Dstart to end; value=3Di; output; end; 3. Then you should wind up with values down of each of the individual = values: 1 2 3 ... 41 4. Then you can get the thing into a comma delimited string by a = couple of approaches. One is the Proc SQL into a variable list, such = as proc sql noprint; select value into :valuelist separated by ',' from values; quit; Or you could read the data set sequentially and then substring. =20 A similar approach could be used in IML- assign each value between the = commas to a matrix, then process each value in the matrix by searching = for the dash. If there's no dash, copy the value to the new matrix. = If there is a dash, then grab the start and end value and get into a do = loop and add each value as yo...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #7
Hey Toby - What no regex? No hash? How about a proc format wrapped in a call execute? Data _Null_; Length NewString $ 200 ; String = '1-10,21,22,30-35,40,41' ; call execute ( "proc format; value numstr " || String || " ='Nums'; run ;"); Do _K = input(Scan( String , 1 , ',-' ),best12.) To input(Scan( String , -1 , ',-'),best12.); if put(_K,numstr.)='Nums' then NewString = CatX( ',' , NewString , _K ) ; End; Put NewString= ; run; Paul Choate DDS Data Extraction (916) 654-2160 -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Toby Dunn Sent: Friday, October 03, 2008 1:55 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 Data _Null_ ; Length NewString $ 200 ; String = '1-10,21,22,30-35,40,41' ; Do I = 1 To ( 1 + CountC( String , ',' ) ) ; TempA = Scan( String , I , ',' ) ; If Find( TempA , '-' ) Then Do ; Start = Input( Scan( TempA , 1 , '-' ) , Best12. ) ; Stop = Input( Scan( TempA , 2 , '-' ) , Best12. ) ; Do K = Start To Stop ; NewString = CatX( ',' , NewString , K ) ; End ; End ; Else Do ; NewString = CatX( ',' , NewString , TempA ) ; End ; End ; Put NewString= ; Run ; On Fri, 3 Oct 2008 16:27:44 -0400, Paul Walker <walker.627@OSU.EDU> wrot...

SCO Unixware 2.1.x on VMware server 1.0.3
I'm trying to install SCO Unixware 2.1.x on VMware server 1.0.3. I realze that this is an unsupported configuration (from VMware's perspective) we're doing this to provide a short term DR solution (peace-of-mind) for a critical Unixware 2.1 system until it can be upgraded, migrated or phased out. The problem we're having is that the SCO installer is not recognizing the IDE controllers or CDROM drive. I have tried loading the ptf3116 updated drivers and the hba212 driver disks to no avail. Within the DCU (Device Configuration Utility) I do see 3 unknown devices which I am assuming are the IDE controller, CDROM drive and Hard Drive but, the IRQ and I/O values do not seem to correspond to what I would expect VMware to be presenting, and appear uneditable. I have searched extensively on the web for documentation on this configuration. I have found posts saying that it is possible to complete this install however, I do not see any info on how it was done. If anyone can offer pointers or links to documentation we've missed I would greatly appreciate the assistance. Thanks, -Andy On Jul 26, 4:16 pm, andy.rei...@gmail.com wrote: > I'm trying to install SCO Unixware 2.1.x on VMware server 1.0.3. I > realze that this is an unsupported configuration (from VMware's > perspective) we're doing this to provide a short term DR solution > (peace-of-mind) for a critical Unixware 2.1 system until it can be > upgraded, migrated or phased...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

Problem installing matplotlib 1.3.1 with Python 2.7.6 and 3.3.3 (release candidate 1)
Hello, I tried to install matplotlib 1.3.1 on the release candidates of Python 2.7.6 and 3.3.3. I am on Mac OS X 10.6.8. Although the installation gave no problems, there is a problem with Tcl/Tk. The new Pythons have their own embedded Tcl/Tk, but when installing matplotlib it links to the Frameworks version of Tcl and TK, not to the embedded version. This causes confusion when importing matplotlib.pyplot: objc[70648]: Class TKApplication is implemented in both /Library/Frameworks/Python.framework/Versions/2.7/lib/libtk8.5.dylib and /Library/Frameworks/Tk.framework/Versions/8.5/Tk. One of the two will be used. Which one is undefined. objc[70648]: Class TKMenu is implemented in both /Library/Frameworks/Python.framework/Versions/2.7/lib/libtk8.5.dylib and /Library/Frameworks/Tk.framework/Versions/8.5/Tk. One of the two will be used. Which one is undefined. objc[70648]: Class TKContentView is implemented in both /Library/Frameworks/Python.framework/Versions/2.7/lib/libtk8.5.dylib and /Library/Frameworks/Tk.framework/Versions/8.5/Tk. One of the two will be used. Which one is undefined. objc[70648]: Class TKWindow is implemented in both /Library/Frameworks/Python.framework/Versions/2.7/lib/libtk8.5.dylib and /Library/Frameworks/Tk.framework/Versions/8.5/Tk. One of the two will be used. Which one is undefined. And then later it gives a lot of error messages. So I think it should be linked to the embedded version. For this the matplotlib setupext.py should be ad...

JDK 1.3.1/1.4/1.5
How can you display JDialog without the Close on the Top Right in any of these versions(JDK 1.3.1/1.4/1.5). The only thing it displays is the close button X and I don't want that? Thank you! vnssoftware wrote: > How can you display JDialog without the Close on the Top Right in any > of these versions(JDK 1.3.1/1.4/1.5). The only thing it displays is > the close button X and I don't want that? > > Thank you! Dialog.setUndecorated() since 1.4 -- Knute Johnson email s/nospam/knute/ Molon labe... ...

1.1, 1.2, 1.3 are all goners now
It seems, well, it doesn't seem but it is, well, it seems that the subject version of Workbenches won't be any more these, versions of Workbench, but versions of Amix. The Amiga's go for the Network. :-)) Have you seen that CDTV on amiga.jorg? That kind od schalametry for games, like some high tech heavily classic games will be played... Heyyyaaa!!! p.s. some piece of equipment, eh.. CD, floppy, installable HD, all, joysticks, joypads for CDTV, playing CDs and playing games. It's like you'll need a high class massive wood shelf for this, the CDs and for the - :( r...

Looking for GCC 3.3.2 on Unixware 7.1.1
I need to install GCC 3.3.3 on our Unixware 7.1.1 server and the quickest way would be to install a package. I have had google, but not found anything. I have downloaded the source, but need to upgrade my binutils first - all being time consuming. Does anyone know where I could get such a package? Even a package for a recent version of binutils would be appreciated as compiling 2.14 is proving "interesting" at the moment. Any help appreciated. JR Julian Regel <news@NOSPAMwhite-tower.demon.co.uk> wrote in message news:<pan.2004.09.18.14.46.03.568974@NOSPAMwhit...

Re: [tao-users] Corba-Script 1.3.5 with TAO 1.2.7
Hi, The problem has to do with CorbaScript-1.3.5/src/cs_CorbaRequest.cpp, e.g. CS_Object* CS_CorbaRequest::invocation () { _request = CorbaTools::create_Request ( _object, _operation_name, Var2ptr(_nvlist), Var2ptr(_nvresult) ); try { _request->invoke (); throw_CORBA2_Exception (_request->env()->exception()); /*****/ } CATCH_ALL_CORBA_SYSTEM_EXCEPTIONS return CS_CorbaValue::create_value (_nvresult->value()); } The line marked /*****/ refers to the operation env() which is no longer available. Intuitively it would seem that just leaving away the try/catch and the throw_CORBA2_Exception() call should solve the problem. However, this may break other ORB configs (i.e. configs for emulated exceptions. Not sure whether there are any such?) Matthias, how did you change cs_CorbaRequest.cpp to get it to compile? --Oliver Matthias Oltmanns wrote: TAO VERSION: 1.2.7 ACE VERSION: 5.2.7 HOST MACHINE and OPERATING SYSTEM: Redhat 8.0 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7) AREA/CLASS/EXAMPLE AFFECTED: [What example failed? What module failed to compile?] DOES THE PROBLEM AFFECT: COMPILATION? If so, what do your $ACE_ROOT/ace/config.h and $ACE_ROOT/include/makeinclu...

sco Unixware 2.1.1 licences
Hello everyone , Does anyone have any UnixWare 2.1.1 licenses that they have not used and are willing to sell ? ...

Web resources about - Re: Audit of Unixware 2.1.3 and SCO 5.7.1.1 machines (fwd) - comp.unix.sco.misc

UnixWare - Wikipedia, the free encyclopedia
UnixWare is typically deployed as a server rather than desktop . Binary distributions of UnixWare are available for x86 architecture computers. ...

UnixWare 7.1.3 Review
OSNews is Exploring the Future of Computing with news on desktop, server, mobile, and specialty operating systems and new computing technology. ...

Ask Slashdot: Finding Legacy UnixWare Installation Media?
... Unisys server in production that hosts a legacy system and are attempting to virtualize it. Unfortunately we don't have a generic UnixWare (2.1.2) ...

Univerzitní křesťanské hnutí - Unlap - Seitenverzeichnis - Facebook
Results from the Seiten directory for Univerzitní křesťanské hnutí - Unlap. Search Facebook for more Seiten with names like Univerzitní křesťanské ...

Open Directory - Computers: Software: Operating Systems: Unix
about dmoz - dmoz blog - suggest URL - update listing - report abuse/spam - help the entire directory only in Operating_Systems/Unix Description ...

SCO official defends Linux sales after suit was filed
The SCO Group's product management director, Erik Hughes, says the company continued to sell its Linux products for over two months after suing ...

Cisco Technical Forums
Find ANY word Find ALL words Find EXACT phrase Help Aironet Power Supplies VoIP Gateways Cisco Repair Refurbished Cisco Cisco CPQRGs New ...

An IBM, Sequent deal would drive Monterey
Rumors of a possible merger with IBM drive Sequent's stock price up, but technology analysts aren't convinced a deal is sensible or imminent. ...

SCO puts disputed code in the spotlight
Technology launches take second place at SCO's confab to a defense of the legal battles against Linux, as the company displays the lines of code ...

Games on a Plane [ 2 ]
If you've flown on a major airline in the past few years, chances are you've seen your share of in-flight games. But who is behind all these, ...

Resources last updated: 3/26/2016 12:29:43 PM