f



Real problems in compiling Apache Web Server with Open Server 5.0.6

Since a few days i've trialed to compile the Apache Web-Server 1.3.27
with SCO Open Server 5.0.6. Unfortunately with almost no success.

1.) I produced the APACI Configuration without any parameters except the
path-prefix (./configure --prefix=/stime1/ebit/apache). This was a
test-case. The Apache worked well.

2.) I compiled the Apache with modules 
(./configure --prefix=/stime1/ebit/apache \
--enable-module=most \
--enable-shared=max)
I got the error: i386ld valuesXa.o: unknown flag: Bexport

3.) There was no chance to compile the apache with shared modules. Now i
tried to compile it with mod_perl. I installed perl 5.005 and mod_perl
1.26 first. After that I made the APACI Configuration with (
../configure --prefix=/stime1/ebit/apache \
--activate-module=src/modules/perl/libperl.a)
Compiling with perl as shared module causes the error as above.

The compile and Instalation works well (without shared module), but when
starting the Apache I got the message: Apache startet - it didn't. There
was no Apache-Process alive.

Now I dont't know what I can do to get a working apache version with
OpenServer 5.0.6.

Thanks for your Help
Gerhard
-- 
Posted via http://web2news.com the faster web2news on the web
To contact in private, remove nn9ospp+5a-m
0
6/30/2003 11:21:29 AM
comp.unix.sco.misc 3925 articles. 0 followers. Post Follow

0 Replies
650 Views

Similar Articles

[PageSpeed] 2

Reply:

Similar Artilces:

SCO Open Server 5.0.6 versus 5.0.4
Hi, Anybody can point me to info or can state if there is a performance improvement from running 5.0.6 versus 5.0.4. Application is database access centered. Regards, Marian news wrote: > Hi, > Anybody can point me to info or can state if there is a performance > improvement from running 5.0.6 versus 5.0.4. Application is database access > centered. I don't think you are going to get a useful answer. Let's assume that I could authoritatively say that 5.0.6 has performance related improvements over .4 in certain areas. I can't recall if it does or doesn't, but the release notes would surely mention any. But so what? What does that say about YOUR application? Do we know where its performance issuees are now? Nope. We could assume it's probably disk bound, because that's a pretty safe assumption most any time, but even if true, what have you done for better or worse in that regard already? Maybe this is an Oracle database and you have it running on a RAID 5 system. As that's usually going to be a bad idea, you could gain nothing even if 5.0.6 did otherwise provide features that would otherwise improve your lot. Maybe you have the whole thing improperly tuned. Maybe you have it so perfectly tuned that an upgrade would make it worse because everything is so critically balanced to what you have now.. There are plenty of good reasons to upgrade to 5.0.6/7. If that's what you are lookimg for (a reason to sell the idea to ...

2 NICs problem in SCO Open Server 5.0.5
Hi, I had a SCO box with 1 card ( 3COM 905B ) installed with IP 10.0.1.30/24 and everything was OK. I installed second card ( the same type - 3COM 905B) and configured IP as 192.168.1.1/24. After kernel relink and boot I can not ping any machine in 192.168.1.0/24 network. I checked all physical connections, routing, etc. Strange thing is that I noticed, that both network interfaces have the same MAC address. If I run ifconfig -a, I see: net1: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.1.30 netmask ffffff00 broadcast 10.0.1.255 perf. params: recv size: 24576; send size: 24576; full-size frames: 1 ether 00:50:04:07:93:d6 net0: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.1 netmask ffffff00 broadcast 192.168.1.255 perf. params: recv size: 24576; send size: 24576; full-size frames: 1 ether 00:50:04:07:93:d6 What did I do wrong? Have you ever seen and solved this problem? Thanks for any advice. Wojtek. Wojtek Korg�l wrote: > Hi, > > I had a SCO box with 1 card ( 3COM 905B ) installed with IP 10.0.1.30/24 and > everything was OK. I installed second card ( the same type - 3COM 905B) and > configured IP as 192.168.1.1/24. After kernel relink and boot I can not ping > any machine in 192.168.1.0/24 network. I checked all physical connections, > routing, etc. Strange thing is that I noticed, that both network interfaces > have the same MAC address. If...

error while installing on-board NIC on Proliant 1600 server in SCO Open Server 5.0.5
dear all, While installing the EFS, when I configure the TCP/IP then i get the messages while relinking the kernel. i encountered the message when after installing the Advanced File and Print Server in SCO Open Server 5 i rebooted the server Compaq Proliant 1600 i get the message /dev/nbcots: invalid transport provider name /dev/netbeui: invalid transport provider name this problem prevents me from printing thru UNIX on windows pcs. i m not able to print on printers attached to windows pcs. one another message also occurs while relinking kernel: /etc/conf/bin/idmknod: driver ida not a character special device but it gives that the kernel has been relinked successfully. another error is: /opt/K/SCO/link/1.1.1Eb/etc/conf/bin/idmknod: driver ida is not a character special device. another error message while booting is: /dev/datalink : no such file or directory nbelink : no such file or directory starting netbios: nbd : can't open NETBIOS device : no such file or directory. these problems prevent me from starting Advanced File and Print services on the server. please help -- Posted via http://dbforums.com ...

Open Server 5.0.6
Excuse me I have the following problem: some times, but since some days more often, when i did the login, frome the server or from each terminal the time from the login it's very, very long, it's very strange for me because before never worked so. Any idea about this matter ? thanks Roberto Quaranta If this is just a problem when logging in from you lan, very likely a DNS problem-- check the contents of /etc/resolv.conf See if you can ping outside to the internet, when you are experiencing this slowness If this is a problem logging in from a dumb terminal-- well, that's another story, I have no idea on that. Barry "Pineapple" <roberquaNO@SPAMvirgilio.it> wrote in message news:c8vvms$b7d$1@newsreader.mailgate.org... > Excuse me > I have the following problem: > some times, but since some days more often, when i did the login, frome the > server or from each terminal the time from the login it's very, very long, > it's very strange for me because before never worked so. > Any idea about this matter ? > thanks > Roberto Quaranta > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.683 / Virus Database: 445 - Release Date: 22/05/2004 "Pineapple" <roberquaNO@SPAMvirgilio.it> wrote in message news:c8vvms$b7d$1@newsreader.mailgate.org... > Excuse me > I have the following problem: > some times, but since some days more...

Remote printing problem with Open Server 5.0.6
Client has a multipurpose Ricoh Printer/copier/scanner I've installed this as a remote printer on a SCO Open Server 5.0.6 along with a couple of HP LaserJet printers. Everything works fine, most of the time. But sometimes, printing will stop and a strange "print job" will appear in the print queue. The printjob manager in scoadmin then will look something like below: �����������������������������������������������������������������������������Ŀ� �� Job View Options Help �� ������������������������������������������������������������������������������ٳ �Print jobs on host gworld.gworld.com � � � � Job ID Queue Owner Size Date/Time Status � �����������������������������������������������������������������������������Ŀ� ��*gwxx.gwxx.co sending to ps1 {} {} �� �� ricoh-691 ricoh john 19438 Dec 28 14:12 �� �� ricoh-692 ricoh john 16477 Dec 28 14:12 �� �� ricoh-693 ricoh john 16966 Dec 28 14:12 �� �� ricoh-694 ricoh john 11404 Dec 28 14:13 gwxx.gwxx.com is the name of the server, and ps1 is the name of the print queue on the ricoh printer (Aficio 2045e)...it has its own builtin network card. I'm not sure what is generating this "Print Job", and why it can't be deleted. Sometimes deleting the jobs behind it will make it go away, but other times the unix box has to be rebooted. Any ideas greatly appreaciated. Thank...

Sendmail 8.12.x or above on SCO Open Server 5.0.6
Hi, Has anyone successfully built a recent(ish) version of Sendmail on SCO Open Server 5.0.6. I'm specifically needing Sendmail that supports authentication when acting as a client (basically pointing at my ISP mail server). Cheers, Stuart. "Stuart Marshall" <stuart@spidersoft.co.uk> wrote in message news:xPudnRuR8sOb8fnZRVnysw@pipex.net... > Hi, > > Has anyone successfully built a recent(ish) version of Sendmail on > SCO Open Server 5.0.6. I'm specifically needing Sendmail that > supports authentication when acting as a client (basically pointing > at my ISP mail server). > > Cheers, > > Stuart. The last time I tried to get Sendmail to do authentication on OpenServer I had to give up because it wants SASL to work, and it won't (see TA#125764). However, I do successfully use msmtp (http://msmtp.sourceforge.net/) to do what you describe. It (I think) will only support "plain" authentication on SCO, but that it is probably good enough for most ISP mail servers. Richard Seeder -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > "Stuart Marshall" <stuart@spidersoft.co.uk> wrote in message > news:xPudnRuR8sOb8fnZRVnysw@pipex.net... > > > > Has anyone successfully built a recent(ish) version of Sendmail on > > SCO Open Server 5.0.6. I'm specifically needing Sendmail that > > supports authentication when acting as a client (basically pointing > > a...

NFS SCo 5.0.5 with SCO 6.0.0
Hi everybody, I have a folder on SCO 5.0.5 server shared through NFS with a new SCO 6.0.0 with MP2 server (converted from a SCO 5.0.6 version). Before conversion file locks (over network) on this folder works well (eg from server SCO 5.0.6 I was able to see locks generated from SCO 5.0.5 box and viceversa), now with SCO 6.0.0 does not work ! I see that on SCO 6.0.0 the lockd daemon is active .. so it should work ... Please can you help me ? Thanks Cuffiette ...

Dell Server for SCO 5.0.6
I'm looking to replace my Dell server for OSR 5.0.6. I find that none of the current Dell tower server models are officially approved for OSR 5.0.6, but the PowerEdge 840 is certified for OSR 5.0.7. Anyone running 5.0.6 on the PowerEdge 840? Thanks, --Ray On Fri, Apr 24, 2009, RWP wrote: >I'm looking to replace my Dell server for OSR 5.0.6. I find that none >of the current Dell tower server models are officially approved for >OSR 5.0.6, but the PowerEdge 840 is certified for OSR 5.0.7. Anyone >running 5.0.6 on the PowerEdge 840? We are running SCO 5.0.6a in VMware virtual machines which pretty much eliminates hardware compatibility issues. Generally we install this on the Latest & Greatest verions of CentOS Linux. The resulting system is significantly faster in the VM than it was when running on the previous hardware, which makes sense as current hardware is significantly faster than whatever was available when 5.0.6 was originally installed. Our primary OSR development system, which also runs my ancient accounting software, is running on a Supermicro box with 4GB RAM, and dual Opterons. The SCO VM has 1.5GB RAM allocated, which is more than it was running native. Bill -- INTERNET: bill@celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way Voice: (206) 236-1676 Mercer Island, WA 98040-0820 Fax: (206) 232-9186 Skype: jwccsllc (206) 855-5792 Independent self-re...

How to install LDAP server on SCO 5.0.6
I want to install LDAP ( http://www.gracion.com/server/whatldap.html ) on my sco box, Is there a installation guide for SCO ? Thanks E Arredondo wrote: > I want to install LDAP ( http://www.gracion.com/server/whatldap.html ) on my > sco box, Is there a installation guide for SCO ? > > Thanks > > Sure thing.. http://aplawrence.com/Unixart/ldap.html -- Tony Lawrence Unix/Linux/Mac OS X resources: http://aplawrence.com "Tony Lawrence" <foo@pcunix.com> wrote in message news:mIOdndGAeYyuWOrfRVn-vg@comcast.com... >E Arredondo wrote: >> I want to install LDAP ( http://www.gracion.com/server/whatldap.html ) on >> my sco box, Is there a installation guide for SCO ? >> >> Thanks >> >> > > Sure thing.. > > > http://aplawrence.com/Unixart/ldap.html > > > -- > Tony Lawrence > Unix/Linux/Mac OS X resources: http://aplawrence.com Thank you so much ! ...

ttyp problem on Sco Open Server 5.04
I connect to my server trough a VT220 emulation PC and the server make a ttypX pseudo-terminal device. But when I logoff the emulation the server wrongly keep the ttypX without PID process. I sow this because when I shutdown the system It returned a message like "/etc/shutdown:3106 alarm call" and after 120 seconds it asked to me if I want to shutdown (y/n). The system then shutdown normally. Also the boot is correct and has no problems. What can I do to solve this problem? Thanks Marco This is the syslog file of my server with the telnetd error: [cut] Jul 9 08:43:56 scosysv telnetd[654]: ttloop: peer died: Unknown error Jul 9 08:44:22 scosysv telnetd[731]: ttloop: peer died: Unknown error Jul 9 08:44:42 scosysv telnetd[729]: ttloop: peer died: Unknown error Jul 9 08:45:17 scosysv telnetd[733]: can't find terminal control database entry for line ttyp0 Jul 9 08:46:43 scosysv telnetd[800]: can't find terminal control database entry for line ttyp0 Jul 9 08:49:28 scosysv telnetd[869]: can't find terminal control database entry for line ttyp1 Jul 9 08:50:03 scosysv telnetd[842]: can't find terminal control database entry for line ttyp0 Jul 9 09:57:19 scosysv telnetd[1084]: can't find terminal control database entry for line ttyp2 Jul 9 09:58:13 scosysv telnetd[1110]: can't find terminal control database entry for line ttyp2 Jul 9 10:00:50 scosysv telnetd[1056]: can't find terminal control database entry for line ttyp1 Jul 9 ...

Open Server 5.0.6 Media Kit
I need Open Server 5.0.6 installation CD and the boot disk, I do have a valid license/Activation codes, just need the media kit, if anyone has it please post here or contact me directly. Thanks, Abid akhan@att.net typed (on Tue, Feb 27, 2007 at 05:29:21AM -0800): | I need Open Server 5.0.6 installation CD and the boot disk, I do have | a valid license/Activation codes, just need the media kit, if anyone | has it please post here or contact me directly. Thanks, | SCO offers item CC-200UX74-5.0.6, the 5.0.6 media kit, for $149.00. Ask your SCO dealer. -- JP ==> http://www.frappr.com/cusm <== ...

SCO unix 5.0.6 web services setup
I need to install the "web services" deal on my unix box so that when a customer sends me requests with SOAP or XML my system accepts the call on the specific port. Is there a process to do that ? I'm currently running netscape fastract as a web server, I heard I need apache + axis , Are there other options to setup the web services ? thanks Where can I get this new Web Service from SCO ? Is it under their ftp site or I have to pay for it ? http://www.crn.com/sections/breakingnews/dailyarchives.jhtml;jsessionid=ERBHJ1BYLZ3IUQSNDBGCKH0CJUMEKJVN?articleId=18824984&_requestid=1614593 In spite of the legal circus engulfing The SCO Group--and lingering concerns about the Unix company's future--top executives took the opportunity at the company's annual partner conference in Las Vegas to outline SCO's new Internet and Web services offerings and assert its intent to stay in business. At SCO Forum 2003, SCO announced the delivery of key component of its SCOx Web services initiative--SCOx WebFace Solution Suite 4.0--as well as the SCOsms Web Services API and SCObiz Web Services APIs. The company's SCOx direction and Web services API plans were unveiled last April. The enhanced suite and new APIs, designed to enable partners and customers to migrate legacy Unix applications to a services-oriented architecture, consists of the WebFace Browser Application Platform and WebFace Studio development platform. SCO's Web servic...

Server to server = Server client to server?
For a server to server connection, is the connecting server considered as a client of the accepting server or is it not? I have the following classes: Connection <--- base class of the following two ClientConnection <--- client ServerConnection <--- server ServerClientConnection <--- server as a client of another server. But then I came across something that states "A client is anything connected to a server that is not another client". Comments please... Just remember! Server ( programm ) is always listening a connections!!! - wrote: &g...

VMWare Server + SCO 5.0.7 networking problems
Hi, Sorry all, another VMWare question here! I've been trying without success for a couple of days to get a SCO VM system running. I'm using VMWare Server which also has a couple of Linux based systems which do work fine. The problem is quite weird. Basically, once booted I can "see out", from the SCO box - ping websites, telnet to other local machines etc... In addition from the machine running the VM I can telnet in, browse served Apache pages etc... Problems start when I attempt to connect from other machines on the network - they can ping the SCO VM system, but can't telnet in, or for example Apache doesn't serve pages. It's not completely broken because there is some evidence of a connection on the SCO end, eg. when I telnet I see this :- Trying 10.80.14.205... Connected to 10.80.14.205 (10.80.14.205). Escape character is '^]'. Connection closed by foreign host. If I try to browse an Apache page (default Apache 5.0.7 setup, haven't done anything with it yet) I do see the connection in access_log but nothing gets returned. It strikes of network issues - but as I say I can ping the box and can also telnet out from it. Plus the Linux servers work fine - I've tried everything on DHCP and the Linux servers work fine but not the SCO 5.0.7 one. I've just done a clean install of 5.0.7 to try and resolve the issue. Anyone any pointers? I'm using the default (auto detected) HW AMD PCNet-PCI adapter. Cheers, Stuar...

Trying to compile putty-0.60 on SCO UNIX 5.0.7 with GCC and SCO Dev
I am trying to compile putty downloaded from http://linux.softpedia.com/progDownload/PuTTY-Download-347.html but get the error below. gcc -g -O2 -Wall -Werror -DHAVE_CONFIG_H -DHAVE_X11 -DHAVE_X -DSYSV -Di386 -DS CO325 -D__SCO__ -DHAVE_XAW -DHAVE_SHAPE_EXT -DHAVE_SHAPE -DHAVE_SHM_EXT -DHAVE_X SHM -DHAVE_XCONVERTCASE -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr /include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/gl ib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/X11R6/include -I.././ -I../charset/ -I../windows/ -I../unix/ -I../mac/ -I../macosx/ -c ../ proxy.c cc1: warnings being treated as errors .../proxy.c: In function `proxy_for_destination': .../proxy.c:315: warning: implicit declaration of function `strncasecmp' gmake: *** [proxy.o] Error 1 # My programming skill level tops out at ./configure and make. Searching for instances of strncasecmp in the putty working directory shows: /tmp/putty-0.60/unix # cd .. # find . -type f -print | xargs grep strncasecmp | less ../mac/stricmp.c:#define strncasecmp strnicmp ../mac/stricmp.c:strncasecmp(s1, s2, n) ../unix/unix.h:#define strnicmp strncasecmp (END) In unix/unix.h: #define DEFAULT_CODEPAGE 0xFFFF #define CP_UTF8 CS_UTF8 /* from libcharset */ #define strnicmp strncasecmp #define stricmp strcasecmp /* BSD-semantics version of signal(), and another helpful function */ void (*putty_signal(int sig, void (*func)(int)))(int); void block_si...

Open server 5.0.5 on Toshiba4200
Hi, I've got a problem when i want to install SCO on my laptop. It's an Toshiba 4200. I boot on the floppy drive "SCO OpenServer release 5.0.5 Boot Disk" And when i select my IDE CDrom drive to start the install, it don't find any device to install the system ./. I try to change the parameter of my bios section and boot directly on the CDrom, but no change, it don't find anything and start on the old system. If some one can help me... Thanks a lot. -- Posted via http://dbforums.com Thehush <member40401@dbforums.com> wrote in message news:<3390917.1063985050@dbforums.com>... > Hi, > > > > I've got a problem when i want to install SCO on my laptop. > > It's an Toshiba 4200. > > I boot on the floppy drive "SCO OpenServer release 5.0.5 Boot Disk" > > And when i select my IDE CDrom drive to start the install, it don't find > any device to install the system ./. > > > > I try to change the parameter of my bios section and boot directly > on the CDrom, but no change, it don't find anything and start on the > old system. > OpenServer 5.0.5 does not autodetect the location of the IDE CDROM. I think it defaults to Primary Slave if I remember right. On your machine, you may have the CDROM on Secondary Master to try to install on that setting to see if you can see the CDROM. John ...

Moving Users from 4.6.7 server to 6.5 server
Please can anyone offer a solution? We have the following setup and would like to migrate users from 4.6.7 to 6.5 without losing the existing mail files. Lotus Notes server 4.6.7 (OrgUnit = \SKE, Domain = SK-EUROPE) Lotus Notes server 6.5 (OrgUnit = \SKEUR, Domain = SK-EUROPE) Regards Michael ...

Looking for precompiled 'rsync" for SCO 5.0.5, 5.0.6 and 5.0.7
I was recommended to use 'rsync' for multi-site transfers. But I have come to find that "rsync" does not exist already in OpenServer 5.0.5, 5.0.6 and 5.0.7. You can only get the "source" files which you "must" compile in order to create the "rsync." These seems to require that you compile these on every level of OpenServer you need. Where / how can I get the 'rsync' binaries already compiled for the levels I need? smlunatick typed (on Tue, Aug 18, 2009 at 11:10:53AM -0700): | I was recommended to use 'rsync' for multi-site transfers. But I have | come to find that "rsync" does not exist already in OpenServer 5.0.5, | 5.0.6 and 5.0.7. You can only get the "source" files which you "must" | compile in order to create the "rsync." These seems to require that | you compile these on every level of OpenServer you need. | | Where / how can I get the 'rsync' binaries already compiled for the | levels I need? Get a binary for OSR 5.0.7, and with oss646c, it should run on 5.0.4, 5.0.5, and 5.0.6. Binary afavilable on Brian White's page at www.aljex.com/bkw. -- JP On Aug 18, 7:37=A0pm, Jean-Pierre Radley <j...@jpr.com> wrote: > smlunatick typed (on Tue, Aug 18, 2009 at 11:10:53AM -0700): > | I was recommended to use 'rsync' for multi-site transfers. =A0But I hav= e > | come to find that "rsync" does not exist already in OpenSer...

Problem loading Apache 1.3.31 on Netware 5.0 server
I have just installed Apache 1.3.31 on our Netware 5.0 sp6a server, as per instructions at httpd.apache.org. When I try to load Apache.nlm, I get the following error message: "SERVER-5.00-918: Loader cannot fing public symbol: __init_environment for module APACHE.NLM SERVER-5.00-918: Loader cannot fing public symbol: __deinit_environment for module APACHE.NLM SERVER-5.00-1548: Load file referenced undefined public variable. Module APACHE.NLM NOT loaded" As apache hasn't loaded successfully, there is no error log. A search of the Netware error codes retur...

Problem loading Apache 1.3.31 on Netware 5.0 server
I have just installed Apache 1.3.31 on our Netware 5.0 sp6a server, as per instructions at httpd.apache.org. When I try to load Apache.nlm, I get the following error message: "SERVER-5.00-918: Loader cannot fing public symbol: __init_environment for module APACHE.NLM SERVER-5.00-918: Loader cannot fing public symbol: __deinit_environment for module APACHE.NLM SERVER-5.00-1548: Load file referenced undefined public variable. Module APACHE.NLM NOT loaded" As apache hasn't loaded successfully, there is no error log. A search of the Netware error codes retur...

Printing on a DP-301P Print server SCO Unix OSR 5.0.7
How do a setup a printer that is on my local network with IP 192.168.2.17 ? The Unix server is on 192.168.2.7 on the same network. I tried "scoadmin" looking for something like "add tcp/ip printer" but no luck at all. So I'm thinking that I have to create a new port (i.e. /dev/lp192.168.2.17) so then I can assign a printer to it right ? Any help would be greatly appreciate it. Thanks Enrique "Enrique Arredondo" <atk@sbcglobal.net> wrote in message news:X77Qi.59349$YL5.31497@newssvr29.news.prodigy.net... > How do a setup a printer that is on my local network with IP 192.168.2.17 > ? The Unix server is on 192.168.2.7 on the same network. > > I tried "scoadmin" looking for something like "add tcp/ip printer" but no > luck at all. So I'm thinking that I have to create a new port (i.e. > /dev/lp192.168.2.17) so then I can assign a printer to it right ? > > Any help would be greatly appreciate it. > > Thanks > > Enrique > I can ping 192.168.2.17 ...here: /# ping 192.168.2.17 PING 192.168.2.17 (192.168.2.17): 56 data bytes 64 bytes from mylan17 (192.168.2.17): icmp_seq=0 ttl=255 time=2.522 ms 64 bytes from mylan17 (192.168.2.17): icmp_seq=1 ttl=255 time=1.086 ms 64 bytes from mylan17 (192.168.2.17): icmp_seq=2 ttl=255 time=1.283 ms 64 bytes from mylan17 (192.168.2.17): icmp_seq=3 ttl=255 time=1.330 ms 64 bytes from mylan17 (192.168.2.17): icmp_seq=4 ttl=255 time=1...

Open Server 5.0.5 Hardware Upgrade
I have a client who wants to upgrade the hardware, they want to stay with Open Server 5.0.5, I am thinking about PIII machine with single processor, what is the maximum size Processor 5.0.5 supports, any specific brand name/model. I have used HP/Compaq Proliant in the past. Thanks, Abid akhan@att.net wrote: > I have a client who wants to upgrade the hardware, they want to stay > with Open Server 5.0.5, I am thinking about PIII machine with single > processor, what is the maximum size Processor 5.0.5 supports, any > specific brand name/model. I have used HP/Compaq Proliant in the past. > > Thanks, > > Abid > PIII 1.4GHz But they will be hard to find. Check SuperMicro. Intel still manufactures PIII's but they only sell them to OEM's. <akhan@att.net> wrote in message news:1171034965.501078.105560@j27g2000cwj.googlegroups.com... > I have a client who wants to upgrade the hardware, they want to stay > with Open Server 5.0.5, I am thinking about PIII machine with single > processor, what is the maximum size Processor 5.0.5 supports, any > specific brand name/model. I have used HP/Compaq Proliant in the past. > > Thanks, > > Abid > Why stop at PIII. I've been running 5.0.5 on Pentium 4's for more than 4 years and have never had a problem (even on the Xeon chip). Yes, I know Xeon is supposed to have problems with any release prior to 5.0.6, but my experience has been nothing but good when using th...

FM 6.0 Files and FM 5.0 server
Does FM 5.0 Server hosts FM 6.0 Pro files ? "Hatzigiannakis Nikos" <nikos@ypai.gr> wrote in news:bq4jtr$79j$1 @aiolos.aegean.gr: > Does FM 5.0 Server hosts FM 6.0 Pro files ? RTFM. http://www.filemaker.com/downloads/pdf/datasheet_fms.pdf Hatzigiannakis Nikos wrote: > Does FM 5.0 Server hosts FM 6.0 Pro files ? > > Yes. Webko ...

Difference between Apache Web Server and Tomcat Server
Sir I am little bit confused about Apache Web Server and Apache Tomcat Server. Please give me an link so that i can find it out. BIG BOY wrote: > Sir I am little bit confused about Apache Web Server and Apache Tomcat > Server. Please give me an link so that i can find it out. apache web server is a webserver. tomcat is a servlet container. -- Davide Consonni <davideconsonni@virgilio.it> http://csvtosql.sourceforge.net "L'uomo e' un animale che gioca, e il computer e' un altro mezzo per giocare." -- Scott Adams Davide Consonni wrote: > BIG BOY wrot...

Web resources about - Real problems in compiling Apache Web Server with Open Server 5.0.6 - comp.unix.sco.misc

Cool tools for compiling to JavaScript
Every programmer has a favorite language or two. JavaScript lovers are the luckiest these days because their language is taking over the Internet ...

Feds put protest activity under microscope in compiling national 'risk forecast'
Use of social media, the spread of "citizen journalism," and the involvement of young people are among the key trends highlighted by a federal ...

10 Tips For Compiling A Deal Sheet
Compiling a deal sheet is a great way of taking stock of your experience and of seeing where your experience may be lacking.

Compiling 64-Bit Code
Describes the 64-bit features available in OS X.

Is there a benefit to compiling your code as you go?
Stack Exchange This Q&A is part of a weekly series of posts highlighting common questions encountered by technophiles and answered by users ...

6 cool tools for compiling to JavaScript
Every programmer has a favorite language or two. JavaScript lovers are the luckiest these days because their language is taking over the Internet ...

Compiling The Absurd Box Score For Space Jam ; Or, Shawn Bradley Sucked Against Cartoons, Too
This is Regressing, a numbers-minded column by our clever friends at the Harvard College Sports Analysis Collective. Over the next few days, ...

We're Compiling Every Police-Involved Shooting In America. Help Us.
The United States has no database of police shootings. There is no standardized process by which officers log when they've discharged their weapons ...

Flat UI Pro Tutorial: Setting and Compiling Using LESS
In this video tutorial, you use components from Flat UI Pro to create a complete simple mail app using LESS. He takes you through the steps to ...

Industrious 4chan user is compiling a list of every videogame ever made
... me to enter a few hundreds of games into my Backloggery account , and I haven't even finished it yet. Ambitious 4chan user Data_baser is compiling ...

Resources last updated: 3/26/2016 1:44:14 PM