I never configured Emulex HBAs on solaris . Please help me out
My server v240 coneect to Hitachi storage. storage admin said tha
they have enabled raid 5 luns to server

I have installed Emulex LP9002L recomended Solaris drives
added following lines in sd.conf and rebooted with -r opatio

name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2

still i don't see any luns in format command

# forma
AVAILABLE DISK SELECTIONS
       0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424
          /pci@1c,600000/scsi@2/sd@0,
       1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424
          /pci@1c,600000/scsi@2/sd@1,
Specify disk (enter its number):

 # modinfo |grep lpf
 19  11e99da  5254c 229   1  lpfc (Emulex LightPulse FC SCSI/IP

 # /usr/sbin/lpfc/lputi
LightPulse Common Utility for Solaris/SPARC. Version 1.6a
(03/03/2004)
Copyright (c) 2003, Emulex Network Systems, Inc

Emulex Fibre Channel Host Adapters Detected: 
Host Adapter 0 (lpfc0) is an LP9K (Ready Mode
Host Adapter 1 (lpfc1) is an LP9K (Ready Mode

Your storage admin needs to add the Solaris HBA WWN to the host storage
domain on the HDS or you will not be able to see any luns.
Can you see the HDS port in the messages file when you boot up? If not,
he has not done this. He also needs to map LUNS to the proper host
storage domain.

This is a big problem in environments where the storage admins are
separated from the Server admins.
I can almost guarantee that he is not presenting something properly.
Is the swicth zoned? Who maintains the switch?