Wolfgang <wtrappe@AT.web.de> wrote:
> I think you miss to allow the initiator to access the target with
> "iscsitadm modify target --acl" on target side.
I add your provided command line. I get the same error message.
Mr. Chow Wing Siu schrieb:
> Wolfgang <wtrappe@AT.web.de> wrote:
>> I think you miss to allow the initiator to access the target with
>> "iscsitadm modify target --acl" on target side.
> I add your provided command line. I get the same error message.
> Johnson Chow
I have only created a target by sharescsi a zfs volume, which i can use
without acl and without problems. Maybe you can make a zfs target and
compare the target parameters with yours.
XPC Target Build problem I use a NI data acquisition card on my host PC. I can connect to Target PC and I can see the specifications of Target PC from the host PC. So I think of there is no a connection problem. When I want to build and download my model to Target PC I see an error as follows:
"The specified Real-Time Workshop target for model 'untitled' cannot be used with a variable-step solver. You must either configure the solver options for a fixed-step solver with an appropriate integration algorithm, or select a target that supports a variable-step solver, such as rsim.tlc. Click Open to launc...
problems with firefox, frames, and targeted links I built my portfolio with Dreamweaver MX. In the bottom frame, I have
thumbnails of images. When you click on a thumbnail, it is supposed to
load the full size image in a targeted part of the top frame. It
works fine in Explorer and Safari, but not in Firefox.
The address is http://www.justmyname.com/portfolio
If anyone has any suggestions on why it isn't working, I'd appreciate
> I built my portfolio with Dreamweaver MX. In the bottom frame, I have
> thumbnails of images. When you click on a thumbnail, it is supposed to
Solaris 8 Cisco iSCSI install problem I'm trying to install the Cisco iSCSI initiator and am running into a
problem. I am logged in as root yet when I attempt to install the
package I get an error that my eid is 60001! I have pulled the code
out that is being used to determine the eid and ran it by itself and it
says my eid is 0! Has anyone seen this issue or have any ideas that I
should try? I have tried commenting out the check, but then it errors
out due to checksum problems...
Here's the fix in case anyone else runs into the issue...
Edit /etc/passwd and change nobody's id's to 0. After ins...
Whether this problem with Refresh or target, I still not clearly understand about it Hi, Everyone.
I have CGI program which the program used to edit the information about
the question from the database. Once, I update the question, if I press
F5 or Refresh, it will load to the default frame.
I have divided the frame into 3 main parts, the top with the
information about the login name, and the left about the menu for user
to nevigate thought (Other link to call cgi files, and this frame will
load itself to the right frame), and the right frame to display
information. I also set the default frame for the right frame as well.
Anyone knows how to make my current cgi file when U...
db problem BIG PROBLEM We are having a problem on our database, DB2 running on 0s/400 v5r1 and
We have a database table on Sap that isn't aligned with the table on
the db, this was caused by a breakdown during a transportation. At
this moment the table on Sap have one field more than the fields list
that we see into db2 from as400.
Someone can help us?
thanks to all
How about running an ALTER TABLE and adding the missing field to the DB2
"Alberto" <firstname.lastname@example.org> wrote in message
> We are h...
Printing problem.. Is it my problem or the comercial printer? Hello,
I hope you guys can help me. I recently made an ad in adobe illustrator
which has a greyscale image with an orange to transparent gradient on
top made by creating an opacity mask. Well on the screen it looks fine
and so I sent it to the comercial printer. However when the comercial
printer gave us the proof it shows a sort of lighter hue band in the
area where the orange gradient ends and meets with the grey image
below. In other words, instead of the gradient blending smoothly with
the grey image below (as it shows on screen!) there is like a lighter
strip that just almost ends abroup...
Problem... Hi all,
I have a problem with my OGL application....
I realized a 3DLaser Sensor simulator: in a windows I put a point
(glVertex)for every misure made by sensor... when I realize the 9434th
misure and display the 9434th point I get an error: "A requested resource
was not available".
I think there is a limit in vertex number in OpenGL, is that True? Is there
a way to jump over the problem?
Any subjestion will be really appreciated
Thank you in advance
> Hi all,
> I have a problem with my OGL application....
> I realized a 3DLaser Sensor simulator: ...
I have a problem Hi,
I have a problem and I`ll be really appreciated if you can solve it.
My project is to read 2 Jpeg files (hand writings) and compare them by
using correlation coefficient.
I found out how to read a jpeg file and also I found out that I need
to convert my images to arrays to wire them to correlation block But I
couldn`t find how to convert them to arrays.
Thank you so much
On May 20, 11:54=A0am, parto.yazd...@gmail.com wrote:
> I found out how to read a jpeg file and also I found out that I need
> to convert my images to arrays to wire them to co...
Terminal services problem and temp license problem Hello
I am having a problem with a user accessing W2K Terminal Server who has
a temporary license that is about to expire. He uses RDC to access our
Terminal Server from his Macintosh PowerBook. There are several
problems that I have run into and I hope you can help me with them.
A) The Terminal Server licensing was installed on our Primary Domain
Controller and not the Terminal Server. When I open it I can see that
he and four other computers have Temporary licenses and that the
Licensing for terminal services is unlimited (Per Device). Also the
temp license is assigned to him whereas the oth...
Problem.... I was member of one php forum...(i even paid 1/4 for webspace and domene for
that site)..someone took my passward..and logged on my name wrote something
stupid and offensiv to some other members...
Now my acc is blocked.....I just wonder..is there anyway i can get into this
site and delete all my posts and to delete my account?...
Site is about pets..since im in many different organisations about lost and
homeless pets..i dont have urge to destroy all forum and site...just my own
or you can help me where i can find explenation how to do it?...
It would be differ...
Plasmon 6100 SCSI problems/solutions/more problems Layout:
-AHA2944 controller (latest drivers)
-Win XP (updated)
-AMD 64 CPU
-Plasmon 6100 Optical drive (SCSI)
-Both IDE and SATA (RAID0) drives -same effect on either
-Problem: After offloading two 12GB platters, from the Plasmon 6100, I
will get an error message while offloading the 3rd platter. "Error
writing .TFF" (Most of the data offloaded are TFF's). When I reboot, in
order to reset the SCSI drivers, the system goes into CHKDSK.
I was getting many errors before I cooled the system down via liquid
cool - which did wonders for the performance. B...
Table cell renderer problem I have a table which uses a custom TableCellRender.
In the code below, TColumn stores some configuration information about
a given column. if it's renderComponentType member is not equal to
"LABEL", it will return a custom component i created.
That component is called "IconLabel" and it is simply a panel with two
labels, one for an IconImage and the other for displaying the text. In
this case, my table consists of only one column out of 7 that uses
Further, when ever a cell is clicked, i disabled SelectionAllowed on
the table and instead, i "outline&q...
Where is the problem? I have just upgraded to the new ROM, installed hpgcc on a new laptop
and updated a C program I had.
When I try to run it I get Error: Not an ARM program.
I compiled the hiworld example and still get the same error.
Programs that were on my calculator before the ROM upgrade run fine.
Any idea what is going on? Otherwise I will have to go through all the
variables one by one :-(
I have got the same problem
you must have the good version of launcher
and download arm toolbox
Thanks a lot, I had my suspicions about the A...
problem with timing simulation (clear explanation of problem) Hi all,
to be more clear about my problem with timing simulation
after i implement it using xilinx it is creating one TIME_SIM.VHD and
TIME_SIM.SDF file under the folder "timing"
it has an identifier "X_INV_PP" in both files when i compile
TIME_SIM.VHD it is giving an error
"Unknown identifier "X_INV_PP""
Cannot find component declaration
did anyone come across similar kind of problem.please help me out
you need to compile the simmprim vhdl library first.
in your $XILINX directory under /vhdl/src/simprims
problem again Hey.. I made a starting set-up for my form dat sets my controls RECORD, EDIT,
UPDATE into enabled NO.. then when i close the whole database and try to open
it again.. the set-up is now different.. and it happens too in my other field
names... HOw can i solve this?
Message posted via http://www.accessmonster.com
"hugz via AccessMonster.com" <u33625@uwe> wrote
> Hey.. I made a starting set-up for my form
> dat sets my controls RECORD, EDIT,
> UPDATE into enabled NO.. then when i close
> the whole database and try to open it again..
> the set-up is...
Hardware Problem / Software Problem -- Strange Artifacts on Screen I'm running Tiger (10.4.2) on a 17" Al PowerBook. Frequently, but not always,
and for reasons undetermined, bright green artifacts will appear on the
screen. These artifacts seem to be related to certain areas of the image
being displayed. I'm curious as to whether others have experienced them and,
if so, was it determined whether they were hardware or software related.
There are a couple screenshots for viewing at my dot mac public folder which
can be found by using the Finder's Go menu to reach the public folder at my
James L. Ryan -- Talie...
Norton Speed Disk problems recently, after years of *no* problems
What in the holy heck gives with Symantec Corp lately, they could not
have done a better job of sabotoging the Mac platform if they tried!
Did Bill Gates buy them out?
Recently, trusting the latest incarnation of Norton's Speed Disk,
(big-mistake) - I set up a 4.00 GB partition for a stripped-down
Panther OS 10.3.2 install, about 1.6 GBs of files.
As usual with a fresh Panther install, the files were scattered all
over the relatively small 4.00 GB partition.
In the past, Norton Speed Disk had no problem whipping such a partition
In the past, Speed Disk has _never_ bit m...
Solaris 9, Internet access problem, DNS problem? Hello,
I just finished the installation of Solaris 9 on Sun Enterprise
450 server. I can not access the website by address, but I can ping the
IP of internal and expternal IP addresses. During the installation in
one of the screens it asked to choose one of the option NIS, NIS+, DNS,
LDAP, None. I may have chosen the option 'NONE'. do you think this is
the problem? How can I correct the problem?
Please see my other post for the config details.
GNU Makefile with phony target and source files as dependencies of a target Hello guys,
I have a question about GNU make running on the Solaris 8 platform.
We have a GNU Makefile which has a "depend" target (for the usual
concept of make depend in C++ programming) which looks like this:
depend : prep $(patsubst %.cc,%.o , $(OBJ))
$(CC) $(CPPFLAGS) -xM1 $? > .depend
Obviously this has a problem, in that the prep target (along with the
depend target) is phony, and so the CC command to generate
dependencies fails with the "prep" value passed as a filename in "$?"
in the command.
I had an idea to change the compilation command t...