I just started to install Solaris 9 4/04 (SPARC) on a few of my machines,
and noticed the following error on first boot after installation on
all Blade 100/150 workstations:

 picld[61]: [ID 402514 daemon.warning] SUNW_piclenvd: can't open 'cpu' sensor
  path:/pci@1f,0/pmu@3/i2c@0,0/temperature@30:die_temp errno:2 
  No such file or directory
 picld[61]: [ID 402514 daemon.warning] SUNW_piclenvd: can't open 'cpu-ambient'
  sensor path:/pci@1f,0/pmu@3/i2c@0,0/temperature@30:amb_temp errno:2 
  No such file or directory
 picld[61]: [ID 800427 daemon.crit] SUNW_piclenvd: initialization failed!

This results in 'prtdiag -v' not showing any environmental status
(temperatures, fan speed).

I'm not sure if this matters, but the path in the error message in fact
differs from the real path:

          /pci@1f,0/pmu@3/i2c@0,0/temperature@30:die_temp
  /devices/pci@1f,0/pmu@3/i2c@0/temperature@30:die_temp

The missing /devices might be OK, but the missing ",0" for i2c maybe
is not.

I couldn't find anything on SunSolve, so I'd like to know if this
is a known bug, if anyone else has seen it, and most important, if
there's a fix ?

mp.
-- 
Systems Administrator | Institute for Software Science | Univ. of Vienna

Martin Paul wrote:
> I just started to install Solaris 9 4/04 (SPARC) on a few of my machines,
> and noticed the following error on first boot after installation on
> all Blade 100/150 workstations:
> 
>  picld[61]: [ID 402514 daemon.warning] SUNW_piclenvd: can't open 'cpu' sensor
>   path:/pci@1f,0/pmu@3/i2c@0,0/temperature@30:die_temp errno:2 
>   No such file or directory
>  picld[61]: [ID 402514 daemon.warning] SUNW_piclenvd: can't open 'cpu-ambient'
>   sensor path:/pci@1f,0/pmu@3/i2c@0,0/temperature@30:amb_temp errno:2 
>   No such file or directory
>  picld[61]: [ID 800427 daemon.crit] SUNW_piclenvd: initialization failed!
> 
> This results in 'prtdiag -v' not showing any environmental status
> (temperatures, fan speed).
> 
> I'm not sure if this matters, but the path in the error message in fact
> differs from the real path:
> 
>           /pci@1f,0/pmu@3/i2c@0,0/temperature@30:die_temp
>   /devices/pci@1f,0/pmu@3/i2c@0/temperature@30:die_temp
> 
> The missing /devices might be OK, but the missing ",0" for i2c maybe
> is not.
> 
> I couldn't find anything on SunSolve, so I'd like to know if this
> is a known bug, if anyone else has seen it, and most important, if
> there's a fix ?
> 
> mp.

Hi Martin,
It's a known bug, #5012902 'SUNW_piclenvd: initialization failed' and was 
raised last month.  No news on a fix yet.
Chris