f

#### non-Latin-1 fonts with KDE 2.2.2

```Hello,

I have a computer running Debian GNU/Linux 3.0r2 which contains KDE 2.2.2.
I have installed the normal and transcoded font packages which means, I
have the standard fonts available in ISO 10646-1 as well as in several ISO
8859 encodings.

Unfortunately, in KCharSelect only the Latin-1 range is displayed correctly;
all other areas have only questions marks ("?") shown.

Has anybody an idea, what's wrong here?

Wolfgang
``` 0 2/20/2004 12:33:32 PM comp.windows.x.kde  4367 articles. 0 followers. 0 Replies 826 Views Similar Articles

[PageSpeed] 48 Similar Artilces:

how to "(1-3*x^2)/(1-3*x+x^2+2*x^3) => 1/(1-2*x) + x/(1-x-x^2)"?
hi normal(1/(1-2*x) + x/ (1-x-x^2),expanded); 1/(1-2*x) + x/(1-x-x^2) => (1-3*x^2)/(1-3*x+x^2+2*x^3) how to do the reverse? dillogimp@gmail.com writes: > normal(1/(1-2*x) + x/ (1-x-x^2),expanded); > 1/(1-2*x) + x/(1-x-x^2) => (1-3*x^2)/(1-3*x+x^2+2*x^3) > how to do the reverse? convert(%,parfrac,x); -- Joe Riel ...

x^(3/2)+x^(5/2) = (x+x^2)*x^(1/2)
Is there a simple way to get Maple to convert x^(3/2) + x^(5/2) to (x+x^2)*x^(1/2). I am willing to assume(x>0). Maple does recognize these as being equal: > p:=x^(3/2)+x^(5/2): > q:=(x+x^2)*sqrt(x): > simplify(p-q); 0 Here's a clumsy way to do it: > p:=x^(3/2)+x^(5/2): > assume(t>0): > subs(x=t^2,p); > simplify(%,{t^2=x}); > collect(%,t); Is there something simpler? (This has undoubtedly come up before, but I cannot find it anywhere.) --Edwin If you do not insist upon your incomplete factoriz...

Integral: Exp[-(x-m)^2/(2 s^2)] x^3 (1+x^2)^-1
Hi, any suggestion to make the integral of: Exp[-(x-m)^2/(2 s^2)] x (1+x^2)^-1 Exp[-(x-m)^2/(2 s^2)] x^2 (1+x^2)^-1 Exp[-(x-m)^2/(2 s^2)] x^3 (1+x^2)^-1 between -inf and +inf (or indefinite)? Look like it is not possible, but it is too long time I do not make integrals with more advanced techinques (as going to the complex plane)... so if you have suggestions (wonderful a solution :) ).... THANKS Ale ...

[News] Amarok 2.2.1, KOffice 2.1 RC1, and Ultimate KDE Desktop
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Post Amarok 2.2.1: Adding some color to your life! ,----[ Quote ] | The upcoming Amarok 2.2.1 release is turning | out to be quite an impressive one, | especially considering how short of a | release cycle we have put ourselves on. The | changelog is full of good stuff already! `---- http://amarok.kde.org/blog/archives/1115-Post-Amarok-2.2.1-Adding-some-color-to-your-life!.html KOffice 2.1 Release Candidate 1 Released ,----[ Quote ] | The application that has received the most | bugfixes is once again Krita. Also KWord has | seen numerous improvements in many places, | and the Microsoft Word filter has once again | been improved. The same goes for KPresenter | and its Powerpoint import filter and | KSpread. `---- http://www.koffice.org/news/koffice-2-1-release-candidate-1-released/ Building The Ultimate KDE Desktop With Arch Linux (Part 1) ,----[ Quote ] | Welcome to the first part of my mini-guide | for creating a killer KDE4 desktop with Arch | Linux. In this multi-part article, I’ll | first give you a general overview of | installing this awesome distribution, and | then in subsequent parts I’ll kick it up a | notch and walk you through installing the | best KDE features out there and even clone | some features of other KDE distro’s while | we’re at it. `---- http://www.itnewstoday.com/?p=1029 Recent: Amarok 2.2.0: Back on Track ,----[ Quote ] | You owe it to yourself to try Amarok if you’re | a ...

LaTex equation numbering like 2.1, 2.2, also 2.0.1, 2.0,2, 2.1.1, etc
David Roach wrote: > Is there a simple command to have latex number > the equations by the section numbers automatically. > > David From the LaTeX Companion (what a wonderful book!) %%%%%%%%%%%%%%%%%%%%%% % number equations within sections % In preamble \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} %%%%%%%%%%%%%%%%%%%%%% Numbers within sections...I use this all the time in articles. Even works with ******************* ******************* Brilliant. And then I got numbering within subsections by repeating and editing (not replacing), so I now have:- (Just after the documentClass command) \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} \makeatletter \@addtoreset{equation}{subsection} \makeatother \renewcommand{\theequation}{\thesubsection.\arabic{equation}} Bob Bob Marlow schrieb: > David Roach wrote: > >> Is there a simple command to have latex number >> the equations by the section numbers automatically. >> >> David > > From the LaTeX Companion (what a wonderful book!) > > %%%%%%%%%%%%%%%%%%%%%% > > % number equations within sections > % In preamble > > \makeatletter > \@addtoreset{equation}{section} > \makeatother > \renewcommand{\theequation}{\thesection.\arabic{equation}} > > %%%%%%%%%%%%%%%%%%%%%% [more code] > Hi! I th...

HoldForm[1*2*3] should give 1 x 2 x 3 not 2 x 3
HoldForm[] is loosing the 1* when it apparently should not: In:= HoldForm[1*2*3] Out= 2 x 3 In:= HoldForm[1*1*1] Out= 1 x 1 x 1 In:= HoldForm[3*2*1] Out= 3 x 2 In:= HoldForm[2*2*2] Out= 2 x 2 x 2 In:= HoldForm[2*1*3] Out= 2 x 3 In:= HoldForm[1*2] Out= 1 x 2 In:= HoldForm[1*2*1] Out= 1 x 2 x 1 Q.E.D. Indeed, the same happens with Hold and HoldComplete. I'd say this is a bug. Cheers -- Sjoerd On Feb 25, 11:07 am, "Q.E.D." <a...@netzero.net> wrote: > HoldForm[] is loosing the 1* when it...

Signed square ss(x) = (x^2)^(1/2)*x = sgn(x)*x^2
Hi Since the power is more relevant to analyze than the amplitude I have come = up with the idea of using signed square ss(x) =3D x^2 for positive x and -x= ^2 for negative x or ss(x) =3D (x^2)^(1/2)*x =3D sgn(x)*x^2 Instead of analyzing the power as the square of the amplitude the signed po= wer could be used instead. This would preserve more information of the orig= inal signal. The original amplitude signal can be recreated from the signed= square power signal with signed square root. I can imagine signed square to be applicable to codec evaluation and signal= compression since the power of the signal is more relevant to compress tha= n the amplitude. It would be easy to make a simple test with Scilab and some sound or image = file. Would it be possible to analyze this theoretically with Karhunen-Lo=E8ve th= eory? David On Tuesday, October 29, 2013 10:49:11 AM UTC-4, davidjons...@gmail.com wrot= e: > Hi >=20 >=20 >=20 > Since the power is more relevant to analyze than the amplitude I have com= e up with the idea of using signed square ss(x) =3D x^2 for positive x and = -x^2 for negative x or ss(x) =3D (x^2)^(1/2)*x =3D sgn(x)*x^2 >=20 >=20 >=20 > Instead of analyzing the power as the square of the amplitude the signed = power could be used instead. This would preserve more information of the or= iginal signal. The original amplitude signal can be recreated from the sign= ed square power signal wit...

Printing 2^1, 2^2, 2^3, 2^4 and 2^5
Hi, When I use a while loop, the output is: 2 4 8 16 32, as desired: <?php \$c=1; while(\$c<=5) { \$d = newpow(2, \$c); print "\$d "; \$c++; } function newpow(\$base, \$power) { // statements... } ?> The But when I use a for loop, the output is: 64: <?php for(\$c=1; \$c<=5; \$c++); { \$d = newpow(2, \$c); print "\$d "; } function newpow(\$base, \$power) { // statements... } ?> Why is this?? Many thanks, Michael mejpark wrote: > When I use a while loop, the output is: 2 4 8 16 32, as desired: [...] > The But when I use a for loop, the output is: 64...

Does 4/2/2= (4/2)/2 =1 OR = 4/(2/2)=4
I don't have matlab and I am trying to translate some simple matlab code. Does 4/2/2 = (4/2)/2 = 1 or 4/2/2 = 4/(2/2) = 4 On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > I don't have matlab and I am trying to translate some simple matlab code. > > Does 4/2/2 = (4/2)/2 = 1 yes. At a given precedence level (and obviously two of the same operators are the same level) evaluation proceeds from LtoR. ....snip... <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> -- dpb <none@non.net> wrote in message <k2njh1\$jes\$1@speranza.aioe.org>... > On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > > I don't have matlab and I am trying to translate some simple matlab code. > > > > Does 4/2/2 = (4/2)/2 = 1 > > yes. At a given precedence level (and obviously two of the same > operators are the same level) evaluation proceeds from LtoR. > > ...snip... > > <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> > > -- There are a few thing you need to understand: 1. You need to get matlab in order to translate the simple code 2. You should define your parameters as in what is the expected output of your search based on the equations used: Is it : a) 4/2/2 b) (4/2/2) On 9/11/2012 11:13 PM, Salvinder wrote: .. > There are a few thing you need to understand: > 1. ...

how to lock kde panel in 2.2.2?
hi folks, is there a way to lock the panel so that no changes can be made to it accidentally? i dont know how i do it, but sometimes when i click on a button on the panel, a small popup menu shows up saying: "Add as a file manager URL" "Add as a QuickBrowser" the taskbar gets all scrunched up and one time i messed up my panel since i didn't notice the popup until it was too late. one other way this affects me is when i use a kvm at work and the mouse gets in some bad state where it makes the panel disappear (along with all sorts of other havoc.) thanks in advance, John jguerrero -at- live365 ..d.ot. ..co.m. ^--- thanks@in.advance ...

linspace(2,2,2) returns [2 2] ??
May be the help for linspace should change? It says: "LINSPACE(X1, X2, N) generates N points between X1 and X2." Notice, it says BETWEEN. But when I ask for 2 points, between 2 and 2: ---------------- EDU>> linspace(2,2,2) ans = 2 2 --------------- May be mathematically this is ok? i.e. there are infinite points between the point and itself? (on the real line), but from programming point of view, it is confusing. no? --Nasser Maybe it should say "generates N points between X1 and X2, inclusive." What did you expect to get back as an answer from issuing linspace(2,2,2)? I didn't understand your statement "there are infinite points between the point and itself?" How do you have an infinite number of points between 2 and 2? I can see an infinite number of points between 2 and something that's not itself, like 2.00000000000000001, but if they are absolutely perfectly identical how are you getting an infinite number of points? On 10/10/2010 11:16 AM, Image Analyst wrote: > Maybe it should say "generates N points between X1 and X2, inclusive." > > What did you expect to get back as an answer from issuing linspace(2,2,2)? > I was just not expecting it to "work". may be an error message. That is not the point. The point is that it did work. > I didn't understand your statement "there are infinite points between the point and it...

2 * 2 * 2 * 2 or pow(2, 4)?
Hi , I hope this isn't too trivial to ask, but I'm evaluating a polynomial that involve lots of terms like x^2y^2z^3, and although I can use the power function pow(a, b), I wonder if just writing x*x*y*y*z*z*z for example wouldn't be more efficient than pow(x, 2)*pow(y, 2)*pow(z,3). Or is it all the same? Thanks, - Olumide Olumide wrote: > I hope this isn't too trivial to ask, but I'm evaluating a polynomial > that involve lots of terms like x^2y^2z^3, and although I can use the > power function pow(a, b), I wonder if just writing x*x*y*y*z*z*z for > exam...

KDE CVS 3.2 (2.1.93) RPMs for SUSE 8.2
Hi, Does anyone know of anywhere that frequently (daily?) produces RPM builds of the 3.2 branch ? I'm keen to test the system, but lack the drive space etc. to CVS get and build. I have been getting some snapshot RPMs from the SuSE FTP server, but it's a little inconsistant, I'm a heavy user and have filed/investigated many bugs etc. and I'd like to see if they are resolved sooner. Many thanks -- Regards Sean Clarke ------------------------------------------------- Linux.... for those whose IQ is greater than 98 !! Have you checked out the development portion of www.kde.org ftp://ftp.kde.org/pub/kde/unstable/3.1.93/SuSE/ Sean Clarke wrote: > Hi, > Does anyone know of anywhere that frequently (daily?) produces RPM > builds of the 3.2 branch ? > > I'm keen to test the system, but lack the drive space etc. to CVS get and > build. > > I have been getting some snapshot RPMs from the SuSE FTP server, but it's > a little inconsistant, I'm a heavy user and have filed/investigated many > bugs etc. and I'd like to see if they are resolved sooner. > > Many thanks > Walt Nelson wrote: >Have you checked out the development portion of www.kde.org > ftp://ftp.kde.org/pub/kde/unstable/3.1.93/SuSE/ Yes, those are the original KDE 3.2 beta RPMs. I have since upgraded to some later ones, but these are a week or so old - I'd really like a more regular source. Thanks anyway. -- Regards Sean...

I have mandrake 9.1 running kde 3.2

Re: how to lock kde panel in 2.2.2?

[News] Linux Mint 2.2 KDE Edition Review; Foresight Linux 1.2 Released
Review: Linux Mint 2.2 Beta 020 "Bianca KDE Edition" ,----[ Quote ] | While it is always nice to have another Linux distribution, because | choice is good, I didn't see any compelling reason to use Linux Mint | over the Ubuntu which it is based off of. The look is slightly | different, with some different configuration options here and there. | I can't really say it offers anything special over Ubuntu, but you never | know, there are no doubt future improvements that the Linux Mint team | will make. Hopefully they fix the video driver issue so I can try it | out on my deskto...

What is the difference between (x^2+y^2) and (x.^2+y.^2) in matlab?
z=sqrt(x^2+y^2) c=(z<15) imshow(c) gives a square cut diagonally half with lower right side being white and other being black z=sqrt(x.^2+y.^2) c=(z<15) imshow(c) gives a square with circle in centre What is the difference between (x^2+y^2) and (x.^2+y.^2) in matlab? "Sagar Chand" <sagarchand_9@rediffmail.com> wrote in message <n8efgg\$100\$1@newscl01ah.mathworks.com>... > z=sqrt(x^2+y^2) > c=(z<15) > imshow(c) > gives a square cut diagonally half with lower right side being white and other being black > > z=sqrt(x.^2...

porting network driver from 2.2.x to 2.4.x #2
Hello, All! There are some sources of pseudo network interface driver develkoped for 2.2.x kernel. I have to port it onto 2.4.x kernel. I have explored the structure 'net_device' from linux/net/netdevice.h, there are few major changes. The main problem for now is - how to check that interface is ready to transmit data (in 2.2.x 'tbusy' field was used fot this and function 'test_and_set_busy' checking the 'tbusy' state). But thus field was removed from 2.4.x kernel, and now you should use the function 'netif_start_queue' or 'netif_stop_queue'. How can I check in 2.4.x that device is not busy and ready to to transmit data? Thanks in advance. With best regards, Roman Mashak. E-mail: mrv@tusur.ru ...

Kontact 1.0.2, KMail 1.7.2 (KDE 3.3.2 Mandriva 2005 LE) can't see my GPG key, but knode can use it
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi I can't get to sign e-mails in KMail. When I look up my identity, there is nothing in the "cryptograhy" tab of my identity. However, I can make god signatures from knode (e.g. this article :-) ). When I try to read keys to assign a key in Configure Kontact -> Mail -> Identities -> "this one" -> Cryptography there are no keys to pick from and when I click the Change button next to OpenGPG signing key, I get a pop-up error meesage "no backends found for listing keys. Check your installation." I have KDE 3.3.2 from plain Mandriva 2005 LE. Any help appreciated Jens - -- Key ID 0x09723C12, jensting@tingleff.org Analogue filtering / 5GHz RLAN / Mdk Linux / odds and ends http://www.tingleff.org/jensting/ +44 1223 211 585 "Howdy, stranger.." "Stranger than WHAT?" 'Texarkana' -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) iD8DBQFDStZtimJs3AlyPBIRAqo2AKCZbwF5pP0AwiARL9Ckt4fJUxoY+ACfb+Ue aAPXhmCrXy3zgCyDLt5YTnc= =l/FQ -----END PGP SIGNATURE----- ...

Assume X; Y and Z are jointly Gaussian mean-zero random variables with the (joint) variance given by K := Var(X; Y;Z) =[2 1 0;1 2 1;0 1 2 ]
Assume X; Y and Z are jointly Gaussian mean-zero random variables with the (joint) variance given by K := Var(X; Y;Z) =[2 1 0;1 2 1;0 1 2 ] (a) Determine the distribution of U = X + Y + Z. (b)Let W = X + Y and V = X + Y . Compute the joint distribution of W and V . after assiging the values to k matrix how can i find u "pramod kumar" <pramod.kilu@gmail.com> wrote in message news:jpbdev\$hqh\$1@newscl01ah.mathworks.com... > Assume X; Y and Z are jointly Gaussian mean-zero random variables with the > (joint) variance given > by > K := Var(X; Y;Z) =[2 1 0;1...

[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 3;....;n n n n n]
Hi, Anybody knows how to create this matrix but without using any loops? a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] Thank you. Hana. Hana wrote: > Hi, > Anybody knows how to create this matrix but without using any loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] HELP REPMAT - Randy Hana wrote: > > > Hi, > Anybody knows how to create this matrix but without using any > loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] > > Thank you. > Hana. Hope this isn't homework. >> repmat([1:n]'...

Help construct a tree 1 -> 1.1 -> 1.2 -> 2 -> 2.1 -> 2.1.1 etc HELP !!!!!!!
Folks I need help. I have a view or(Text file) as follows: '1 2.1 1.1.1 1.1.1.1 2.2.1 1.3 2 Dim Parent() As String Dim Level1() As String Dim Level2() As String Dim Level3() As String etc .. How can I construct a tree. parent, children, grand children etc... and also figure out # of children # of grand children etc Thanks "Mos" <lndebug@gmail.com> wrote in message news:875cd1df-7605-45ab-9f7b-f1edec25d47b@r34g2000vbi.googlegroups.com... > Folks I need help. I have a view or(Text file) as follows: > > '1 > 2.1 > 1.1.1 > 1....

Help construct a tree 1 -> 1.1 -> 1.2 -> 2 -> 2.1 -> 2.1.1 etc HELP !!!!!!!
Folks I need help. I have a view or(Text file) as follows: '1 2.1 1.1.1 1.1.1.1 2.2.1 1.3 2 Dim Parent() As String Dim Level1() As String Dim Level2() As String Dim Level3() As String etc .. How can I construct a tree. parent, children, grand children etc... and also figure out # of children # of grand children etc Thanks "Mos" <lndebug@gmail.com> wrote in message news:875cd1df-7605-45ab-9f7b-f1edec25d47b@r34g2000vbi.googlegroups.com... > Folks I need help. I have a view or(Text file) as follows: > > '1 > 2.1 > 1.1.1 > 1....

Help construct a tree 1 -> 1.1 -> 1.2 -> 2 -> 2.1 -> 2.1.1 etc HELP !!!!!!!
Borland Guru's I need help I have a text file as follows: 1 2 1.1 1.1.1 3.3 2.3 etc I cannot use a control active x tree I need to read this file and 1 is a parent 1.1 is a child of parent 1 and 2 is a parent 2.3 is a child of parent 2 and construct in search a way using arrays or probably a recursive function No xml parsing just read a file. Does any body have a function "Mos" <lndebug@gmail.com> wrote in message news:c1aaeb20-3c1f-408d-9986-bb8d28a87509@s31g2000vbp.googlegroups.com... > I have a text file as follows: > 1 > 2 > 1.1 >... Web resources about - non-Latin-1 fonts with KDE 2.2.2 - comp.windows.x.kde

Resources last updated: 3/23/2016 12:22:56 PM