robhass's articles:

Items(14) /2 Next >> Last >|

ASA na local users 0 30 (2/24/2008 10:21:08 PM) comp.dcom.sys.cisco Hi How to disable SSH access or enable access for selected users on ASA5510 (SW version is 7.2). Is it possible ? Currently I have defined by 'username' command few users. Part of them are defined to configure... robhass

ASA and PAT issue 1 95 (7/19/2006 10:28:42 PM) comp.dcom.sys.cisco Hi I made static NAT entry to transmit HTTPS requests from Internet to our WWW server inside LAN. Configuration of ASA5510 below: interface Ethernet0/0 nameif outside security-level 0 ip address 1.1.1.30 25... Robert

PIX 506E and Internet Access via VPN 1 89 (6/3/2006 6:06:56 PM) comp.dcom.sys.cisco Hi I configured PIX 506E as Cisco VPN Server but I've got only 50% success. VPN Clients connects successfully to the VPN Server. Access to intranet networks (intranet) works fine, but Internet access not. I on... Robert

VLANs limitations 1 176 (5/30/2006 3:15:21 PM) comp.dcom.sys.cisco Hi Is any VLANs limitation on Cisco 1801 or Cisco 1841. I have small project where I want use Cisco 1801 (preffered) or 1841 to inter-vlan routing+CAR QoS between about 50 VLANs. What kind of software license ... Robert

Migration to Rapid-PVST 1 93 (5/13/2006 7:40:16 AM) comp.dcom.sys.cisco Hi I have question regarding migration from classic PVST to Rapid-PVST. My Layer2 network diagram: customers | | 2950G ... Robert

VTP question 3 104 (5/5/2006 7:37:45 PM) comp.dcom.sys.cisco Hi I've got Catalyst based network looks like this: SW1 ----ge----- SW2 ----ge----- SW3 SW1 is in VTP-Domain called 'localvtp', server mode SW2 is in VTP-Transparent SW3 is in VTP-Domain called 'localvtp', se... Robert

Lost DC Power plug 0 65 (5/5/2006 1:07:23 PM) comp.dcom.sys.cisco Hello I have Cisco 7301 router with DC power supply. But I lost DC Power plug connector. Any recommendations about equivalent power plus for 7301 ? Thanks, Robert ... Robert

MICA modems allocation on AS5300 2 28 (2/26/2006 10:04:35 AM) comp.dcom.sys.cisco Hello I have configured AS5300 with 2xE1 (PRI) connected to our PABX. AS5300 is working as dial-in server for POS terminals. Currently AS5300 have 60 MICA modems (line 1 60) and both E1s using these modems. Bu... Robert

Problem with IPSEC VPN 2 250 (1/22/2006 4:30:15 PM) comp.dcom.sys.cisco Hello I have problem with site-to-site connection between two PIXes. Network diagram looking like this: PIX501---------- Internet -------------------- PIX515E | ... Robert

Problem with IPSEC VPN #2 0 28 (1/22/2006 4:18:55 PM) comp.dcom.sys.cisco ------=_Part_26579_10985899.1137946735544 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello I have problem with site-to-site connection... Robert